Subject: [PATCH v5 5/9] arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1

From: Clément Péron <[email-masked]>
Date: Mon, 20 Apr 2020 15:00:17 +0200

Enable CPU opp tables for Beelink GS1.

This needs to change the CPU regulator max voltage to fit
the OPP table.

Also add the ramp-delay information to avoid any out of spec
running as the regulator is slower at reaching the voltage
requested compare to the PLL reaching the frequency.

There is no such information for AXP805 but similar PMIC (AXP813)
has a DVM (Dynamic Voltage scaling Management) ramp rate equal
to 2500uV/us.

Signed-off-by: Clément Péron <[email-masked]>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 8f09d209359b..3f7ceeb1a767 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -77,6 +78,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
 &de {
 	status = "okay";
 };
@@ -234,7 +239,8 @@
 			reg_dcdca: dcdca {
 				regulator-always-on;
 				regulator-min-microvolt = <810000>;
-				regulator-max-microvolt = <1080000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-cpu";
 			};
 
@@ -242,6 +248,7 @@
 				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-gpu";
 			};
 
-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel