Subject: Re: [PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk

From: Rob Herring <[email-masked]>
Date: Thu, 7 May 2020 16:52:56 -0500

On Tue,  5 May 2020 18:13:17 +0200, Nicolas Saenz Julienne wrote:
> On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
> loaded directly from an EEPROM or, if not present, by the SoC's
> VideoCore. Inform VideoCore that VL805 was just reset.
> 
> Also, as this creates a dependency between USB_PCI and VideoCore's
> firmware interface, and since USB_PCI can't be set as a module neither
> this can. Reflect that on the firmware interface Kconfg.
> 
> Signed-off-by: Nicolas Saenz Julienne <[email-masked]>
> ---
> 
> Changes since v5:
>  - Fix Kconfig issue with allmodconfig
> 
> Changes since v4:
>  - Do not split up error message
> 
> Changes since v3:
>  - Add more complete error message
> 
> Changes since v1:
>  - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it
>    gets compiled when needed.
> 
>  drivers/firmware/Kconfig      |  3 ++-
>  drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
>  2 files changed, 18 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <[email-masked]>

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel