Subject: [PATCH v3 2/4] PCI: cadence: Remove "cdns, max-outbound-regions" DT property

From: Kishon Vijay Abraham I <[email-masked]>
Date: Fri, 8 May 2020 18:36:44 +0530

"cdns,max-outbound-regions" device tree property provides the
maximum number of outbound regions supported by the Host PCIe
controller. However the outbound regions are configured based
on what is populated in the "ranges" DT property.

Avoid using two properties for configuring outbound regions and
use only "ranges" property instead.

Acked-by: Rob Herring <[email-masked]>
Acked-by: Tom Joseph <[email-masked]>
Signed-off-by: Kishon Vijay Abraham I <[email-masked]>
---
 drivers/pci/controller/cadence/pcie-cadence-host.c | 6 ------
 drivers/pci/controller/cadence/pcie-cadence.h      | 2 --
 2 files changed, 8 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 597b61e6cc4b..079692aa4da1 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -146,9 +146,6 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
 	for_each_of_pci_range(&parser, &range) {
 		bool is_io;
 
-		if (r >= rc->max_regions)
-			break;
-
 		if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
 			is_io = false;
 		else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
@@ -242,9 +239,6 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 	pcie = &rc->pcie;
 	pcie->is_rc = true;
 
-	rc->max_regions = 32;
-	of_property_read_u32(np, "cdns,max-outbound-regions", &rc->max_regions);
-
 	rc->no_bar_nbits = 32;
 	of_property_read_u32(np, "cdns,no-bar-match-nbits", &rc->no_bar_nbits);
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index ecb159dba6f6..cf1afd85c2f5 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -266,7 +266,6 @@ struct cdns_pcie {
  * @bus_range: first/last buses behind the PCIe host controller
  * @cfg_base: IO mapped window to access the PCI configuration space of a
  *            single function at a time
- * @max_regions: maximum number of regions supported by the hardware
  * @no_bar_nbits: Number of bits to keep for inbound (PCIe -> CPU) address
  *                translation (nbits sets into the "no BAR match" register)
  * @vendor_id: PCI vendor ID
@@ -277,7 +276,6 @@ struct cdns_pcie_rc {
 	struct resource		*cfg_res;
 	struct resource		*bus_range;
 	void __iomem		*cfg_base;
-	u32			max_regions;
 	u32			no_bar_nbits;
 	u16			vendor_id;
 	u16			device_id;
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel