Subject: Re: [PATCH v2 1/3] ARM: pxa: remove Compulab pxa2xx boards

From: Mike Rapoport <[email-masked]>
Date: Thu, 21 May 2020 10:12:13 +0300

On Wed, May 20, 2020 at 05:21:51PM +0200, Arnd Bergmann wrote:
> On Wed, May 20, 2020 at 12:21 PM Robert Jarzmik <[email-masked]> wrote:
> >
> > As these boards have no more users nor testers, and patching them has
> > become a burden, be that because of the PCI part or the MTD NAND
> > support, let's remove them.
> >
> > The cm-x300 will for now remain and represent Compulab boards at its
> > best in the PXA department.

I think this series missed the cm-x270 NAND driver, so this could be
PATCH 4/3 (not even compile tested).

>From 56a11987f82ef8b32b25dfc17b849f9bbbf03e4d Mon Sep 17 00:00:00 2001
From: Mike Rapoport <[email-masked]>
Date: Thu, 21 May 2020 10:09:47 +0300
Subject: [PATCH] mtd: rawnand: remove CM-X270 NAND driver

The cm-x270 board have been removed and theres is no point to keep this
driver.

Signed-off-by: Mike Rapoport <[email-masked]>
---
 drivers/mtd/nand/raw/Kconfig       |   4 -
 drivers/mtd/nand/raw/Makefile      |   1 -
 drivers/mtd/nand/raw/cmx270_nand.c | 236 -----------------------------
 3 files changed, 241 deletions(-)
 delete mode 100644 drivers/mtd/nand/raw/cmx270_nand.c

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index a80a46bb5b8b..9b08a58ae88e 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -213,10 +213,6 @@ config MTD_NAND_MLC_LPC32XX
 	  Please check the actual NAND chip connected and its support
 	  by the MLC NAND controller.
 
-config MTD_NAND_CM_X270
-	tristate "CM-X270 modules NAND controller"
-	depends on MACH_ARMCORE
-
 config MTD_NAND_PASEMI
 	tristate "PA Semi PWRficient NAND controller"
 	depends on PPC_PASEMI
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 2d136b158fb7..a817052286c7 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
 omap2_nand-objs := omap2.o
 obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
 obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
-obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_MARVELL)		+= marvell_nand.o
 obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
diff --git a/drivers/mtd/nand/raw/cmx270_nand.c b/drivers/mtd/nand/raw/cmx270_nand.c
deleted file mode 100644
index 045b6175ae79..000000000000
--- a/drivers/mtd/nand/raw/cmx270_nand.c
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2006 Compulab, Ltd.
- *  Mike Rapoport <[email-masked]>
- *
- *  Derived from drivers/mtd/nand/h1910.c (removed in v3.10)
- *       Copyright (C) 2002 Marius Gröger ([email-masked])
- *       Copyright (c) 2001 Thomas Gleixner ([email-masked])
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   CM-X270 board.
- */
-
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa2xx-regs.h>
-
-#define GPIO_NAND_CS	(11)
-#define GPIO_NAND_RB	(89)
-
-/* MTD structure for CM-X270 board */
-static struct mtd_info *cmx270_nand_mtd;
-
-/* remaped IO address of the device */
-static void __iomem *cmx270_nand_io;
-
-/*
- * Define static partitions for flash device
- */
-static const struct mtd_partition partition_info[] = {
-	[0] = {
-		.name	= "cmx270-0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL
-	}
-};
-#define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
-
-static u_char cmx270_read_byte(struct nand_chip *this)
-{
-	return (readl(this->legacy.IO_ADDR_R) >> 16);
-}
-
-static void cmx270_write_buf(struct nand_chip *this, const u_char *buf,
-			     int len)
-{
-	int i;
-
-	for (i=0; i<len; i++)
-		writel((*buf++ << 16), this->legacy.IO_ADDR_W);
-}
-
-static void cmx270_read_buf(struct nand_chip *this, u_char *buf, int len)
-{
-	int i;
-
-	for (i=0; i<len; i++)
-		*buf++ = readl(this->legacy.IO_ADDR_R) >> 16;
-}
-
-static inline void nand_cs_on(void)
-{
-	gpio_set_value(GPIO_NAND_CS, 0);
-}
-
-static void nand_cs_off(void)
-{
-	dsb();
-
-	gpio_set_value(GPIO_NAND_CS, 1);
-}
-
-/*
- *	hardware specific access to control-lines
- */
-static void cmx270_hwcontrol(struct nand_chip *this, int dat,
-			     unsigned int ctrl)
-{
-	unsigned int nandaddr = (unsigned int)this->legacy.IO_ADDR_W;
-
-	dsb();
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if ( ctrl & NAND_ALE )
-			nandaddr |=  (1 << 3);
-		else
-			nandaddr &= ~(1 << 3);
-		if ( ctrl & NAND_CLE )
-			nandaddr |=  (1 << 2);
-		else
-			nandaddr &= ~(1 << 2);
-		if ( ctrl & NAND_NCE )
-			nand_cs_on();
-		else
-			nand_cs_off();
-	}
-
-	dsb();
-	this->legacy.IO_ADDR_W = (void __iomem*)nandaddr;
-	if (dat != NAND_CMD_NONE)
-		writel((dat << 16), this->legacy.IO_ADDR_W);
-
-	dsb();
-}
-
-/*
- *	read device ready pin
- */
-static int cmx270_device_ready(struct nand_chip *this)
-{
-	dsb();
-
-	return (gpio_get_value(GPIO_NAND_RB));
-}
-
-/*
- * Main initialization routine
- */
-static int __init cmx270_init(void)
-{
-	struct nand_chip *this;
-	int ret;
-
-	if (!(machine_is_armcore() && cpu_is_pxa27x()))
-		return -ENODEV;
-
-	ret = gpio_request(GPIO_NAND_CS, "NAND CS");
-	if (ret) {
-		pr_warn("CM-X270: failed to request NAND CS gpio\n");
-		return ret;
-	}
-
-	gpio_direction_output(GPIO_NAND_CS, 1);
-
-	ret = gpio_request(GPIO_NAND_RB, "NAND R/B");
-	if (ret) {
-		pr_warn("CM-X270: failed to request NAND R/B gpio\n");
-		goto err_gpio_request;
-	}
-
-	gpio_direction_input(GPIO_NAND_RB);
-
-	/* Allocate memory for MTD device structure and private data */
-	this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
-	if (!this) {
-		ret = -ENOMEM;
-		goto err_kzalloc;
-	}
-
-	cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
-	if (!cmx270_nand_io) {
-		pr_debug("Unable to ioremap NAND device\n");
-		ret = -EINVAL;
-		goto err_ioremap;
-	}
-
-	cmx270_nand_mtd = nand_to_mtd(this);
-
-	/* Link the private data with the MTD structure */
-	cmx270_nand_mtd->owner = THIS_MODULE;
-
-	/* insert callbacks */
-	this->legacy.IO_ADDR_R = cmx270_nand_io;
-	this->legacy.IO_ADDR_W = cmx270_nand_io;
-	this->legacy.cmd_ctrl = cmx270_hwcontrol;
-	this->legacy.dev_ready = cmx270_device_ready;
-
-	/* 15 us command delay time */
-	this->legacy.chip_delay = 20;
-	this->ecc.mode = NAND_ECC_SOFT;
-	this->ecc.algo = NAND_ECC_HAMMING;
-
-	/* read/write functions */
-	this->legacy.read_byte = cmx270_read_byte;
-	this->legacy.read_buf = cmx270_read_buf;
-	this->legacy.write_buf = cmx270_write_buf;
-
-	/* Scan to find existence of the device */
-	ret = nand_scan(this, 1);
-	if (ret) {
-		pr_notice("No NAND device\n");
-		goto err_scan;
-	}
-
-	/* Register the partitions */
-	ret = mtd_device_register(cmx270_nand_mtd, partition_info,
-				  NUM_PARTITIONS);
-	if (ret)
-		goto err_scan;
-
-	/* Return happy */
-	return 0;
-
-err_scan:
-	iounmap(cmx270_nand_io);
-err_ioremap:
-	kfree(this);
-err_kzalloc:
-	gpio_free(GPIO_NAND_RB);
-err_gpio_request:
-	gpio_free(GPIO_NAND_CS);
-
-	return ret;
-
-}
-module_init(cmx270_init);
-
-/*
- * Clean up routine
- */
-static void __exit cmx270_cleanup(void)
-{
-	/* Release resources, unregister device */
-	nand_release(mtd_to_nand(cmx270_nand_mtd));
-
-	gpio_free(GPIO_NAND_RB);
-	gpio_free(GPIO_NAND_CS);
-
-	iounmap(cmx270_nand_io);
-
-	kfree(mtd_to_nand(cmx270_nand_mtd));
-}
-module_exit(cmx270_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mike Rapoport <[email-masked]>");
-MODULE_DESCRIPTION("NAND flash driver for Compulab CM-X270 Module");
-- 
2.25.2

> > Signed-off-by: Robert Jarzmik <[email-masked]>
> 
> Acked-by: Arnd Bergmann <[email-masked]>
> 
> Should we take the series through the soc tree? If so, please
> send them to [email-masked] if there are no objections;
> or along with other patches you might have in the pull requests.
> 
>       Arnd

-- 
Sincerely yours,
Mike.

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel