Subject: Re: [PATCH 1/5] dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too

From: Moritz Fischer <[email-masked]>
Date: Mon, 15 Jun 2020 21:42:02 -0700

On Thu, Jun 11, 2020 at 11:11:40PM +0200, Luca Ceresoli wrote:
> The Xilinx 7-series uses the same protocol, mention that.
> 
> Signed-off-by: Luca Ceresoli <[email-masked]>
Acked-by: Moritz Fischer <[email-masked]>
> ---
>  .../devicetree/bindings/fpga/xilinx-slave-serial.txt     | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> index cfa4ed42b62f..9f103f3872e8 100644
> --- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> @@ -1,11 +1,14 @@
>  Xilinx Slave Serial SPI FPGA Manager
>  
> -Xilinx Spartan-6 FPGAs support a method of loading the bitstream over
> -what is referred to as "slave serial" interface.
> +Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the
> +bitstream over what is referred to as "slave serial" interface.
>  The slave serial link is not technically SPI, and might require extra
>  circuits in order to play nicely with other SPI slaves on the same bus.
>  
> -See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
> +See:
> +- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
> +- https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
> +- https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
>  
>  Required properties:
>  - compatible: should contain "xlnx,fpga-slave-serial"
> -- 
> 2.27.0
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel