Subject: [PATCH] ARM: dts: ZII: Disable HW Ethernet switch reset GPIO

From: Chris Healy <[email-masked]>
Date: Wed, 15 Jul 2020 14:22:27 -0700

Disable Ethernet switch reset GPIO with ZII platforms that have it
enabled to sync up with existing ZII platforms that already have
it disabled.

Signed-off-by: Chris Healy <[email-masked]>
---
 arch/arm/boot/dts/vf610-zii-cfu1.dts      | 2 --
 arch/arm/boot/dts/vf610-zii-spb4.dts      | 2 --
 arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts  | 2 --
 arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 2 --
 4 files changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index ce1920c052fc..c2668230a4c0 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -170,7 +170,6 @@
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
 
 			ports {
 				#address-cells = <1>;
@@ -354,7 +353,6 @@
 	pinctrl_switch: switch-grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x3061
-			VF610_PAD_PTE2__GPIO_107		0x1042
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 55b4201e27f6..261317340189 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -127,7 +127,6 @@
 			pinctrl-names = "default";
 			reg = <0>;
 			eeprom-length = <65536>;
-			reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
@@ -312,7 +311,6 @@
 
 	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
 		fsl,pins = <
-			VF610_PAD_PTE2__GPIO_107		0x31c2
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
 	};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index a6c22a79779e..e37b9643269b 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -113,7 +113,6 @@
 			pinctrl-names = "default";
 			reg = <0>;
 			eeprom-length = <65536>;
-			reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
@@ -288,7 +287,6 @@
 
 	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
 		fsl,pins = <
-			VF610_PAD_PTE2__GPIO_107		0x31c2
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
 	};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index 3d05c894bdc0..b3d6d4b9fa9c 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -141,7 +141,6 @@
 			pinctrl-names = "default";
 			reg = <0>;
 			eeprom-length = <65536>;
-			reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
@@ -319,7 +318,6 @@
 
 	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
 		fsl,pins = <
-			VF610_PAD_PTE2__GPIO_107		0x31c2
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
 	};
-- 
2.21.3

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel