Subject: [PATCH 04/16] arm64: dts: imx8mm-beacon-baseboard: Correct SPI CS polarity

From: Krzysztof Kozlowski <[email-masked]>
Date: Mon, 24 Aug 2020 21:06:49 +0200

Since the "spi-cs-high" property is not present, the SPI chip select pin
polarity is active low.

Signed-off-by: Krzysztof Kozlowski <[email-masked]>
---
 arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index bf0859f1e1fa..5b5af8b381df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -70,7 +70,7 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel