Subject: Re: [PATCH 06/13] dt-bindings: mfd: rohm,bd71837-pmic: Add common properties

From: Rob Herring <[email-masked]>
Date: Mon, 14 Sep 2020 16:44:07 -0600

On Fri, Sep 04, 2020 at 04:53:05PM +0200, Krzysztof Kozlowski wrote:
> Add common properties appearing in DTSes (clock-names,
> clock-output-names) to fix dtbs_check warnings like:
> 
>   arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml:
>     pmic@4b: 'clock-names', 'clock-output-names', do not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <[email-masked]>
> ---
>  .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml          | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
> index 65018a019e1d..ecce0d5e3a95 100644
> --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
> @@ -32,9 +32,15 @@ properties:
>    clocks:
>      maxItems: 1
>  
> +  clock-names:
> +    maxItems: 1

Needs to define what the name is.

> +
>    "#clock-cells":
>      const: 0
> +  clock-output-names:
> +    maxItems: 1

Ideally this one too, but we've been more flexible on it.

> +
>  # The BD718x7 supports two different HW states as reset target states. States
>  # are called as SNVS and READY. At READY state all the PMIC power outputs go
>  # down and OTP is reload. At the SNVS state all other logic and external
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel