Subject: Re: [PATCH v4 1/4] dt-bindings: media: imx258: add bindings for IMX258 sensor

From: Rob Herring <[email-masked]>
Date: Mon, 28 Sep 2020 13:46:43 -0500

On Wed, 23 Sep 2020 17:21:26 +0200, Krzysztof Kozlowski wrote:
> Add bindings for the IMX258 camera sensor.  The bindings, just like the
> driver, are quite limited, e.g. do not support regulator supplies.
> 
> Signed-off-by: Krzysztof Kozlowski <[email-masked]>
> 
> ---
> 
> Changes since v3:
> 1. Document also two lane setup.
> 
> Changes since v2:
> 1. Remove clock-frequency, add reset GPIOs, add supplies.
> 2. Use additionalProperties.
> 
> Changes since v1:
> 1. None
> ---
>  .../devicetree/bindings/media/i2c/imx258.yaml | 100 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 101 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx258.yaml
> 

Reviewed-by: Rob Herring <[email-masked]>

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel