Subject: Re: [PATCH 09/10] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" OF

From: Krzysztof Kozlowski <[email-masked]>
Date: Wed, 2 Dec 2020 19:40:38 +0200

On Wed, Dec 02, 2020 at 05:42:40PM +0530, Jagan Teki wrote:
> i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam.
> 
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
> 
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
> 
> i.Core MX8M Mini needs to mount on top of C.TOUCH 2.0 carrier with
> pluged 10.1" OF for creating complete i.Core MX8M Mini C.TOUCH 2.0
> 10.1" Open Frame solution board.
> 
> Add bindings for it.
> 
> Signed-off-by: Jagan Teki <[email-masked]>

Please run the checkpatch - it should complain about order of patches.

> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 8c8f7728788d..9e275921112d 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -669,6 +669,7 @@ properties:
>                - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
>                - engicam,icore-mx8mm               # i.MX8MM Engicam i.Core MX8M Mini SOM
>                - engicam,icore-mx8mm-ctouch2       # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
> +              - engicam,icore-mx8mm-ctouch2-of10  # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" Open Frame

Run dtbs_check before posting.

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel