Subject: Re: [PATCH V2 1/2] dt-bindings: PCI: brcmstb: add BCM4908 binding

From: Rob Herring <[email-masked]>
Date: Tue, 8 Dec 2020 17:44:37 -0600

On Mon, Nov 30, 2020 at 09:32:22AM +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <[email-masked]>
> 
> BCM4908 is a SoC family with PCIe controller sharing design with the one
> for STB. BCM4908 has different power management and memory controller so
> few tweaks are required.
> 
> PERST# signal on BCM4908 is handled by an external MISC block so it
> needs specifying a reset phandle.
> 
> Signed-off-by: Rafał Miłecki <[email-masked]>
> Acked-by: Florian Fainelli <[email-masked]>
> ---
>  .../bindings/pci/brcm,stb-pcie.yaml           | 30 +++++++++++++++++--
>  1 file changed, 28 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index 807694b4f41f..d3ab9e22f97c 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -14,6 +14,7 @@ properties:
>      items:
>        - enum:
>            - brcm,bcm2711-pcie # The Raspberry Pi 4
> +          - brcm,bcm4908-pcie
>            - brcm,bcm7211-pcie # Broadcom STB version of RPi4
>            - brcm,bcm7278-pcie # Broadcom 7278 Arm
>            - brcm,bcm7216-pcie # Broadcom 7216 Arm
> @@ -64,8 +65,6 @@ properties:
>    aspm-no-l0s: true
>  
>    resets:
> -    description: for "brcm,bcm7216-pcie", must be a valid reset
> -      phandle pointing to the RESCAL reset controller provider node.
>      $ref: "/schemas/types.yaml#/definitions/phandle"

This should really just be 'maxItems: 1'. 'resets' already has a type.

>  
>    reset-names:
> @@ -98,12 +97,39 @@ required:
>  
>  allOf:
>    - $ref: /schemas/pci/pci-bus.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: brcm,bcm4908-pcie
> +    then:
> +      properties:
> +        resets:
> +          items:
> +            - description: reset controller handling the PERST# signal
> +
> +        reset-names:
> +          items:
> +            - const: perst
> +
> +      required:
> +        - resets
> +        - reset-names
>    - if:
>        properties:
>          compatible:
>            contains:
>              const: brcm,bcm7216-pcie
>      then:
> +      properties:
> +        resets:
> +          items:
> +            - description: phandle pointing to the RESCAL reset controller
> +
> +        reset-names:
> +          items:
> +            - const: rescal
> +
>        required:
>          - resets
>          - reset-names
> -- 
> 2.26.2
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel