Subject: [PATCH 02/18] ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family

From: Krzysztof Kozlowski <[email-masked]>
Date: Thu, 10 Dec 2020 22:25:18 +0100

The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: f48b5050c301 ("ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards")
Signed-off-by: Krzysztof Kozlowski <[email-masked]>
---
 arch/arm/boot/dts/exynos4412-p4note.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index b2f9d5448a18..5fe371543cbb 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -146,7 +146,7 @@ fuel-gauge@36 {
 			pinctrl-0 = <&fuel_alert_irq>;
 			pinctrl-names = "default";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			maxim,rsns-microohm = <10000>;
 			maxim,over-heat-temp = <600>;
 			maxim,over-volt = <4300>;
-- 
2.25.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel