Subject: Re: [RFC PATCH v2 1/8] dt-bindings: net: sparx5: Add sparx5-switch bindings

From: Rob Herring <[email-masked]>
Date: Mon, 21 Dec 2020 14:40:41 -0700

On Thu, Dec 17, 2020 at 08:51:27AM +0100, Steen Hegelund wrote:
> Document the Sparx5 switch device driver bindings
> 
> Signed-off-by: Steen Hegelund <[email-masked]>
> Signed-off-by: Lars Povlsen <[email-masked]>
> ---
>  .../bindings/net/microchip,sparx5-switch.yaml | 178 ++++++++++++++++++
>  1 file changed, 178 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
> new file mode 100644
> index 000000000000..6e3ef8285e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
> @@ -0,0 +1,178 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip Sparx5 Ethernet switch controller
> +
> +maintainers:
> +  - Lars Povlsen <[email-masked]>
> +  - Steen Hegelund <[email-masked]>
> +
> +description: |
> +  The SparX-5 Enterprise Ethernet switch family provides a rich set of
> +  Enterprise switching features such as advanced TCAM-based VLAN and
> +  QoS processing enabling delivery of differentiated services, and
> +  security through TCAM-based frame processing using versatile content
> +  aware processor (VCAP).
> +
> +  IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
> +  with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K
> +  IPv6 (S,G) multicast groups.
> +
> +  L3 security features include source guard and reverse path
> +  forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and
> +  IP tunnels (IP over GRE/IP).
> +
> +  The SparX-5 switch family targets managed Layer 2 and Layer 3
> +  equipment in SMB, SME, and Enterprise where high port count
> +  1G/2.5G/5G/10G switching with 10G/25G aggregation links is required.
> +
> +properties:
> +  $nodename:
> +    pattern: "^switch@[0-9a-f]+$"
> +
> +  compatible:
> +    const: microchip,sparx5-switch
> +
> +  reg:
> +    minItems: 2
> +
> +  reg-names:
> +    minItems: 2

This is the default based on 'items' length.

> +    items:
> +      - const: devices
> +      - const: gcb
> +
> +  interrupts:
> +    maxItems: 1
> +    description: Interrupt used for reception of packets to the CPU
> +
> +  ethernet-ports:
> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      "^port@[0-9]+$":
> +        type: object
> +        description: Switch ports
> +
> +        allOf:
> +          - $ref: ethernet-controller.yaml#
> +
> +        properties:
> +          reg:
> +            description: Switch port number
> +
> +          max-speed:
> +            maxItems: 1

Is that an array?

> +            description: Bandwidth allocated to this port
> +
> +          phys:

How many? (maxItems)

> +            description: phandle of a Ethernet Serdes PHY
> +
> +          phy-handle:
> +            description: phandle of a Ethernet PHY
> +
> +          phy-mode:
> +            description: Interface between the serdes and the phy

The whole set of modes defined is supported?

> +
> +          sfp:
> +            description: phandle of an SFP
> +
> +          managed:
> +            maxItems: 1

An array?

> +            description: SFP management
> +
> +        required:
> +          - reg
> +          - max-speed
> +          - phys
> +
> +        oneOf:
> +          - required:
> +              - phy-handle
> +              - phy-mode
> +          - required:
> +              - sfp
> +              - managed
> +
> +        additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - ethernet-ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    switch: switch@600000000 {
> +      compatible = "microchip,sparx5-switch";
> +      reg =  <0x10000000 0x800000>,
> +             <0x11010000 0x1b00000>;
> +      reg-names = "devices", "gcb";
> +
> +      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> +      ethernet-ports {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        port0: port@0 {
> +          reg = <0>;
> +          max-speed = <1000>;
> +          phys = <&serdes 13>;
> +          phy-handle = <&phy0>;
> +          phy-mode = "qsgmii";
> +        };
> +        /* ... */
> +        /* Then the 25G interfaces */
> +        port60: port@60 {
> +          reg = <60>;
> +          max-speed = <25000>;
> +          phys = <&serdes 29>;
> +          sfp = <&sfp_eth60>;
> +          managed = "in-band-status";
> +        };
> +        port61: port@61 {
> +          reg = <61>;
> +          max-speed = <25000>;
> +          phys = <&serdes 30>;
> +          sfp = <&sfp_eth61>;
> +          managed = "in-band-status";
> +        };
> +        port62: port@62 {
> +          reg = <62>;
> +          max-speed = <25000>;
> +          phys = <&serdes 31>;
> +          sfp = <&sfp_eth62>;
> +          managed = "in-band-status";
> +        };
> +        port63: port@63 {
> +          reg = <63>;
> +          max-speed = <25000>;
> +          phys = <&serdes 32>;
> +          sfp = <&sfp_eth63>;
> +          managed = "in-band-status";
> +        };
> +        /* Finally the Management interface */
> +        port64: port@64 {
> +          reg = <64>;
> +          max-speed = <1000>;
> +          phys = <&serdes 0>;
> +          phy-handle = <&phy64>;
> +          phy-mode = "sgmii";
> +        };
> +      };
> +    };
> +
> +...
> -- 
> 2.29.2
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel