Subject: Re: [PATCH v3 4/6] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0

From: Krzysztof Kozlowski <[email-masked]>
Date: Wed, 23 Dec 2020 12:59:33 +0100

On Wed, Dec 23, 2020 at 04:33:41PM +0530, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
> 
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
> 
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
> 
> i.Core MX8M Mini needs to mount on top of this Carrier board for
> creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
> 
> Add support for it.
> 
> Signed-off-by: Matteo Lisi <[email-masked]>
> Signed-off-by: Jagan Teki <[email-masked]>
> ---
> Changes for v3:
> - don't maintain common nodes and include it, if no feature diff
> Changes for v2:
> - enabled fec1 node
> - updated commit message
> - dropped engicam from filename since it aligned with imx6 engicam
>   dts files naming conventions.
> - add i2c nodes
> - fixed v1 comments
> 
>  arch/arm64/boot/dts/freescale/Makefile        |  1 +
>  .../dts/freescale/imx8mm-engicam-ctouch2.dtsi | 82 +++++++++++++++++++
>  .../freescale/imx8mm-icore-mx8mm-ctouch2.dts  | 21 +++++
>  3 files changed, 104 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi

You split some common part to ctouch2.dtsi so it can be reused in
multiple places. I saw so far only one usage, where are the others?

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel