Subject: Re: [PATCH 1/2] dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM

From: Krzysztof Kozlowski <[email-masked]>
Date: Thu, 24 Dec 2020 12:23:35 +0100

On Wed, Dec 23, 2020 at 02:23:15PM -0800, Tim Harvey wrote:
> Add bindings for the Gateworks Venice Development kit boards with
> IMX8MM System on Module.
> 
> Signed-off-by: Tim Harvey <[email-masked]>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 1ca9dfa..705c6e8 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -405,6 +405,9 @@ properties:
>                - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
>                - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
>                - fsl,imx8mm-evk            # i.MX8MM EVK Board
> +              - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
> +              - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
> +              - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit

I think you should skip the wildcards in compatible and choose one
specific compatible. What if at some point you would like to add gw,imx8mm-gw7113-0x?

Best regards,
Krzysztof

>                - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
>            - const: fsl,imx8mm
>  
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel