Subject: Re: [PATCH v14 11/11] kdump: update Documentation about crashkernel

From: Baoquan He <[email-masked]>
Date: Thu, 18 Feb 2021 16:40:06 +0800

On 01/30/21 at 03:10pm, Chen Zhou wrote:
> For arm64, the behavior of crashkernel=X has been changed, which
> tries low allocation in DMA zone and fall back to high allocation
> if it fails.
> 
> We can also use "crashkernel=X,high" to select a high region above
> DMA zone, which also tries to allocate at least 256M low memory in
> DMA zone automatically and "crashkernel=Y,low" can be used to allocate
> specified size low memory.
> 
> So update the Documentation.

Nice document adding which also takes care of x86 code implementation,
thanks. By the way, maybe you can remove John's 'Tested-by' since it
doesn't make much sense to test a document patch.

Acked-by: Baoquan He <[email-masked]>

> 
> Signed-off-by: Chen Zhou <[email-masked]>
> Tested-by: John Donnelly <[email-masked]>
> ---
>  Documentation/admin-guide/kdump/kdump.rst     | 22 ++++++++++++++++---
>  .../admin-guide/kernel-parameters.txt         | 11 ++++++++--
>  2 files changed, 28 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
> index 75a9dd98e76e..0877c76f8015 100644
> --- a/Documentation/admin-guide/kdump/kdump.rst
> +++ b/Documentation/admin-guide/kdump/kdump.rst
> @@ -299,7 +299,16 @@ Boot into System Kernel
>     "crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
>     starting at physical address 0x01000000 (16MB) for the dump-capture kernel.
>  
> -   On x86 and x86_64, use "crashkernel=64M@16M".
> +   On x86 use "crashkernel=64M@16M".
> +
> +   On x86_64, use "crashkernel=X" to select a region under 4G first, and
> +   fall back to reserve region above 4G. And go for high allocation
> +   directly if the required size is too large.
> +   We can also use "crashkernel=X,high" to select a region above 4G, which
> +   also tries to allocate at least 256M below 4G automatically and
> +   "crashkernel=Y,low" can be used to allocate specified size low memory.
> +   Use "crashkernel=Y@X" if you really have to reserve memory from specified
> +   start address X.
>  
>     On ppc64, use "crashkernel=128M@32M".
>  
> @@ -316,8 +325,15 @@ Boot into System Kernel
>     kernel will automatically locate the crash kernel image within the
>     first 512MB of RAM if X is not given.
>  
> -   On arm64, use "crashkernel=Y[@X]".  Note that the start address of
> -   the kernel, X if explicitly specified, must be aligned to 2MiB (0x200000).
> +   On arm64, use "crashkernel=X" to try low allocation in DMA zone and
> +   fall back to high allocation if it fails.
> +   We can also use "crashkernel=X,high" to select a high region above
> +   DMA zone, which also tries to allocate at least 256M low memory in
> +   DMA zone automatically.
> +   "crashkernel=Y,low" can be used to allocate specified size low memory.
> +   Use "crashkernel=Y@X" if you really have to reserve memory from
> +   specified start address X. Note that the start address of the kernel,
> +   X if explicitly specified, must be aligned to 2MiB (0x200000).
>  
>  Load the Dump-capture Kernel
>  ============================
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index a10b545c2070..908e5c8b61ba 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -738,6 +738,9 @@
>  			[KNL, X86-64] Select a region under 4G first, and
>  			fall back to reserve region above 4G when '@offset'
>  			hasn't been specified.
> +			[KNL, arm64] Try low allocation in DMA zone and fall back
> +			to high allocation if it fails when '@offset' hasn't been
> +			specified.
>  			See Documentation/admin-guide/kdump/kdump.rst for further details.
>  
>  	crashkernel=range1:size1[,range2:size2,...][@offset]
> @@ -754,6 +757,8 @@
>  			Otherwise memory region will be allocated below 4G, if
>  			available.
>  			It will be ignored if crashkernel=X is specified.
> +			[KNL, arm64] range in high memory.
> +			Allow kernel to allocate physical memory region from top.
>  	crashkernel=size[KMG],low
>  			[KNL, X86-64] range under 4G. When crashkernel=X,high
>  			is passed, kernel could allocate physical memory region
> @@ -762,13 +767,15 @@
>  			requires at least 64M+32K low memory, also enough extra
>  			low memory is needed to make sure DMA buffers for 32-bit
>  			devices won't run out. Kernel would try to allocate at
> -			at least 256M below 4G automatically.
> +			least 256M below 4G automatically.
>  			This one let user to specify own low range under 4G
>  			for second kernel instead.
>  			0: to disable low allocation.
>  			It will be ignored when crashkernel=X,high is not used
>  			or memory reserved is below 4G.
> -
> +			[KNL, arm64] range in low memory.
> +			This one let user to specify a low range in DMA zone for
> +			crash dump kernel.
>  	cryptomgr.notests
>  			[KNL] Disable crypto self-tests
>  
> -- 
> 2.20.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel