Subject: [PATCH V2 robh dt/next] dt-bindings: mfd: add Broadcom CRU

From: Rafał Miłecki <[email-masked]>
Date: Wed, 19 May 2021 10:20:49 +0200

From: Rafał Miłecki <[email-masked]>

CRU is a block used in e.g. Northstar devices. It can be seen in the
bcm5301x.dtsi and this binding documents its proper usage.

Signed-off-by: Rafał Miłecki <[email-masked]>
---
V2: Use complete binding & change additionalProperties to false

NOTICE: this patch is based on top of the linux-next as it requires:
ac5f8197d15c ("dt-bindings: pinctrl: convert Broadcom Northstar to the json-schema")
08e9fdfbb224 ("dt-bindings: thermal: brcm,ns-thermal: Convert to the json-schema")
AND merged [email-masked]:Broadcom/stblinux.git devicetree/next as it requires:
8f711f68cffd ("dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema")

This is reworked version of the
[PATCH robh next] dt-bindings: bus: add Broadcom CRU
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email-masked]/
---
 .../devicetree/bindings/mfd/brcm,cru.yaml     | 89 +++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/brcm,cru.yaml

diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
new file mode 100644
index 000000000000..d92424cc8226
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom CRU
+
+maintainers:
+  - Rafał Miłecki <[email-masked]>
+
+description: |
+  Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware
+  block grouping smaller blocks. On Broadcom Northstar platform it contains e.g.
+  clocks, pinctrl, USB PHY and thermal.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,ns-cru
+      - const: simple-mfd
+
+  reg:
+    description: CRU registers
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  pinctrl:
+    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
+patternProperties:
+  '^lcpll0@[a-f0-9]+$':
+    $ref: ../clock/brcm,iproc-clocks.yaml
+
+  '^genpll@[a-f0-9]+$':
+    $ref: ../clock/brcm,iproc-clocks.yaml
+
+  '^thermal@[a-f0-9]+$':
+    $ref: ../thermal/brcm,ns-thermal.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    cru-bus@1800c100 {
+        compatible = "brcm,ns-cru", "simple-mfd";
+        reg = <0x1800c100 0x1d0>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        lcpll0@100 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-lcpll0";
+            reg = <0x100 0x14>;
+            clocks = <&osc>;
+            clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy";
+        };
+
+        genpll@140 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-genpll";
+            reg = <0x140 0x24>;
+            clocks = <&osc>;
+            clock-output-names = "genpll", "phy", "ethernetclk", "usbclk",
+                                 "iprocfast", "sata1", "sata2";
+        };
+
+        pinctrl {
+            compatible = "brcm,bcm4708-pinmux";
+            offset = <0x1c0>;
+        };
+
+        thermal@2c0 {
+            compatible = "brcm,ns-thermal";
+            reg = <0x2c0 0x10>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
-- 
2.26.2

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel