Subject: [RFCv1 2/8] phy: amlogic: meson8b-usb2: Use phy init callback function

From: Anand Moon <[email-masked]>
Date: Thu, 17 Jun 2021 19:41:37 +0000

Reorder the code for bulk clk_enable into .init callback function.

Cc: Martin Blumenstingl <[email-masked]>
Signed-off-by: Anand Moon <[email-masked]>
---
 drivers/phy/amlogic/phy-meson8b-usb2.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index 771b73f3b44e..d48171b0b32e 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -142,10 +142,9 @@ static const struct regmap_config phy_meson8b_usb2_regmap_conf = {
 	.max_register = REG_TUNE,
 };
 
-static int phy_meson8b_usb2_power_on(struct phy *phy)
+static int phy_meson8b_usb2_init(struct phy *phy)
 {
 	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
-	u32 reg;
 	int ret;
 
 	if (!IS_ERR_OR_NULL(priv->reset)) {
@@ -162,6 +161,14 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
 		return ret;
 	}
 
+	return 0;
+}
+
+static int phy_meson8b_usb2_power_on(struct phy *phy)
+{
+	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
+	u32 reg;
+
 	regmap_update_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
 			   REG_CONFIG_CLK_32k_ALTSEL);
 
@@ -219,6 +226,7 @@ static int phy_meson8b_usb2_power_off(struct phy *phy)
 }
 
 static const struct phy_ops phy_meson8b_usb2_ops = {
+	.init           = phy_meson8b_usb2_init,
 	.power_on	= phy_meson8b_usb2_power_on,
 	.power_off	= phy_meson8b_usb2_power_off,
 	.owner		= THIS_MODULE,
-- 
2.31.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel