Subject: Re: [PATCH v2 1/1] PCI: layerscape: Add the endpoint linkup notifier support

From: Manivannan Sadhasivam <[email-masked]>
Date: Sat, 6 May 2023 13:28:37 +0530

On Mon, May 01, 2023 at 10:48:06AM -0400, Frank Li wrote:
> Layerscape has PME interrupt, which can be used as linkup notifier.
> Set CFG_READY bit when linkup detected.

Where are you setting this bit?

> 
> Signed-off-by: Xiaowei Bao <[email-masked]>
> Signed-off-by: Frank Li <[email-masked]>
> ---
> Change from v1 to v2
> - pme -> PME
> - irq -> IRQ
> - update dev_info message according to Bjorn's suggestion
> - remove '.' at error message
> 	
>  .../pci/controller/dwc/pci-layerscape-ep.c    | 104 +++++++++++++++++-
>  1 file changed, 103 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index c640db60edc6..e974fbe3b6d8 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -18,6 +18,20 @@
>  
>  #include "pcie-designware.h"
>  
> +#define PEX_PF0_CONFIG			0xC0014
> +#define PEX_PF0_CFG_READY		BIT(0)
> +
> +/* PEX PFa PCIE PME and message interrupt registers*/
> +#define PEX_PF0_PME_MES_DR		0xC0020
> +#define PEX_PF0_PME_MES_DR_LUD		BIT(7)
> +#define PEX_PF0_PME_MES_DR_LDD		BIT(9)
> +#define PEX_PF0_PME_MES_DR_HRD		BIT(10)
> +
> +#define PEX_PF0_PME_MES_IER		0xC0028
> +#define PEX_PF0_PME_MES_IER_LUDIE	BIT(7)
> +#define PEX_PF0_PME_MES_IER_LDDIE	BIT(9)
> +#define PEX_PF0_PME_MES_IER_HRDIE	BIT(10)
> +
>  #define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
>  
>  struct ls_pcie_ep_drvdata {
> @@ -30,8 +44,88 @@ struct ls_pcie_ep {
>  	struct dw_pcie			*pci;
>  	struct pci_epc_features		*ls_epc;
>  	const struct ls_pcie_ep_drvdata *drvdata;
> +	bool				big_endian;
> +	int				irq;
>  };
>  
> +static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +
> +	if (pcie->big_endian)
> +		return ioread32be(pci->dbi_base + offset);
> +	else
> +		return ioread32(pci->dbi_base + offset);
> +}
> +
> +static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset,
> +			  u32 value)

Above function argument could be wrapped within 80 columns.

> +{
> +	struct dw_pcie *pci = pcie->pci;
> +
> +	if (pcie->big_endian)
> +		iowrite32be(value, pci->dbi_base + offset);
> +	else
> +		iowrite32(value, pci->dbi_base + offset);
> +}
> +
> +static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
> +{
> +	struct ls_pcie_ep *pcie = (struct ls_pcie_ep *)dev_id;

No need to do explicit typecase for void pointer.

> +	struct dw_pcie *pci = pcie->pci;
> +	u32 val, cfg;
> +
> +	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> +	if (!val)
> +		return IRQ_NONE;
> +
> +	if (val & PEX_PF0_PME_MES_DR_LUD) {
> +		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
> +		cfg |= PEX_PF0_CFG_READY;
> +		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
> +		dw_pcie_ep_linkup(&pci->ep);
> +
> +		dev_info(pci->dev, "Link up\n");

These messages could be demoted to dev_dbg() logs.

> +	} else if (val & PEX_PF0_PME_MES_DR_LDD) {
> +		dev_info(pci->dev, "Link down\n");
> +	} else if (val & PEX_PF0_PME_MES_DR_HRD) {
> +		dev_info(pci->dev, "Hot reset\n");
> +	}
> +
> +	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);

You should clear the interrupts before processing.

> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
> +				     struct platform_device *pdev)
> +{
> +	u32 val;
> +	int ret;
> +
> +	pcie->irq = platform_get_irq_byname(pdev, "pme");
> +	if (pcie->irq < 0) {
> +		dev_err(&pdev->dev, "Can't get 'pme' IRQ\n");

PME

> +		return pcie->irq;
> +	}
> +
> +	ret = devm_request_irq(&pdev->dev, pcie->irq,
> +			       ls_pcie_ep_event_handler, IRQF_SHARED,
> +			       pdev->name, pcie);

Again, please wrap to fit the 80 column width.

> +	if (ret) {
> +		dev_err(&pdev->dev, "Can't register PCIe IRQ\n");
> +		return ret;
> +	}
> +
> +	/* Enable interrupts */
> +	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
> +	val |=  PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
> +		PEX_PF0_PME_MES_IER_LUDIE;
> +	ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
> +
> +	return 0;
> +}
> +
>  static const struct pci_epc_features*
>  ls_pcie_ep_get_features(struct dw_pcie_ep *ep)
>  {
> @@ -125,6 +219,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>  	struct ls_pcie_ep *pcie;
>  	struct pci_epc_features *ls_epc;
>  	struct resource *dbi_base;
> +	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>  	if (!pcie)
> @@ -144,6 +239,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>  	pci->ops = pcie->drvdata->dw_pcie_ops;
>  
>  	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4);
> +	ls_epc->linkup_notifier = true;
>  
>  	pcie->pci = pci;
>  	pcie->ls_epc = ls_epc;
> @@ -155,9 +251,15 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>  
>  	pci->ep.ops = &ls_pcie_ep_ops;
>  
> +	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
> +
>  	platform_set_drvdata(pdev, pcie);
>  
> -	return dw_pcie_ep_init(&pci->ep);
> +	ret = dw_pcie_ep_init(&pci->ep);
> +	if (ret)
> +		return  ret;

Double space after return.

> +
> +	return  ls_pcie_ep_interrupt_init(pcie, pdev);

Double space after return.

- Mani

>  }
>  
>  static struct platform_driver ls_pcie_ep_driver = {
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel