Subject: [PATCH] [v2] ARM: dts: bcm4709: fix bus range assignment

From: Arnd Bergmann <[email-masked]>
Date: Tue, 14 Apr 2026 08:47:46 +0200

From: Arnd Bergmann <[email-masked]>

The netgear r8000 dts file limits the bus range for the first host
bridge to exclude bus 0, but the two devices on the first bus are
explicitly assigned to bus 0, causing a build time warning:

/home/arnd/arm-soc/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts:142.3-27: Warning (pci_device_bus_num): /axi@18000000/pcie@13000/pcie@0/pcie@0,0/pcie@1,0:bus-range: PCI bus number 0 out of range, expected (1 - 255)
/home/arnd/arm-soc/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts:142.3-27: Warning (pci_device_bus_num): /axi@18000000/pcie@13000/pcie@0/pcie@0,0/pcie@2,0:bus-range: PCI bus number 0 out of range, expected (1 - 255)

As Rosen mentioned, the bus-range property was a mistake, so just
remove it and keep the reg values pointing to bus 0, which is
allowed by the default bus range of the SoC.

Suggested-by: Rosen Penev <[email-masked]>
Fixes: 893faf67438c ("ARM: dts: BCM5301X: add root pcie bridges")
Signed-off-by: Arnd Bergmann <[email-masked]>
---
 arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
index d170c71cbd76..e85693fba16a 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -139,7 +139,6 @@ &pcie_bridge1 {
 	pcie@0,0 {
 		device_type = "pci";
 		reg = <0x0000 0 0 0 0>;
-		bus-range = <0x01 0xff>;
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-- 
2.39.5