Subject: Re: [PATCH v2 1/2] dt-bindings: remoteproc: xlnx: add firmware-name property

From: Conor Dooley <[email-masked]>
Date: Fri, 1 May 2026 16:49:09 +0100

On Fri, May 01, 2026 at 07:37:06AM -0700, Tanmay Shah wrote:
> The firmware-name property indicates which firmware to load on RPU
> during the Linux boot time. It is possible to stop the RPU after boot
> and load different firmware and start RPU.

The file supports 3 devices, do they all support loading firmware like
this?

> 
> Signed-off-by: Tanmay Shah <[email-masked]>
> ---
>  .../devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml     | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> index ee63c03949c9..ae63c3e39ced 100644
> --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> @@ -135,6 +135,10 @@ patternProperties:
>            - description: vring1
>          additionalItems: true
>  
> +      firmware-name:
> +        maxItems: 1
> +        description: default firmware to load
> +
>      required:
>        - compatible
>        - reg
> -- 
> 2.34.1
>