Subject: [PATCH v2 4/6] arm64: dts: qcom: msm8916-alcatel-idol347: Fix sn3190 shutdown GPIO polarity

From: Jun Yan <[email-masked]>
Date: Mon, 25 May 2026 22:46:10 +0800

The sn3190 shutdown pin is active-low [1]. Correct the GPIO flags
from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW to match the hardware.

[1] https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf

Fixes: 1c8cc183d070 ("arm64: dts: qcom: msm8916-alcatel-idol347: add LED indicator")
Signed-off-by: Jun Yan <[email-masked]>
Reviewed-by: Konrad Dybcio <[email-masked]>
---
 arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 2de8b6f9531b..6d51d6efcbac 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -197,7 +197,7 @@ &blsp_i2c6 {
 	led-controller@68 {
 		compatible = "si-en,sn3190";
 		reg = <0x68>;
-		shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_enable_default &led_shutdown_default>;
 		#address-cells = <1>;
-- 
2.54.0