Subject: [PATCH v5 0/3] arm64: dts/bindings: Add support for BeagleBadge

From: Judith Mendez <[email-masked]>
Date: Tue, 26 May 2026 18:54:14 -0500

Hi,

BeagleBoard.org BeagleBadge[1] is a compact, affordable open source
hardware [2] single board computer based on the Texas Instruments AM62L3
SoC designed for IoT and embedded applications. Add base support for
the same.

SD boot:
Link: https://gist.github.com/jmenti/8818fa277597de927dd2b42ab1d2552f

This patch series adds:
- Device tree bindings update for am62l3-badge
- Device tree source for BeagleBadge board
- Defconfig: drivers for BeagleBadge

Changelog since v4:
- Canonical URL fixed
- Switch gpio -> gpios in voltage regulator nodes
- Regulator-always-on removed in sensor_3v3
- Add bootph-all on pinmux nodes
- Fix gpio-line-names formatting
- Nodes: sdhci2, wlan_en regulator, & pinmux removed
- USB aliases removed
- Pickup Conor's review tag

v4
Link: https://lore.kernel.org/all/[email-masked]/
v3
Link: https://lore.kernel.org/all/[email-masked]/
V2
Link: https://lore.kernel.org/all/[email-masked]/
V1
Link: https://lore.kernel.org/all/[email-masked]/

Patch series depends on:
Link: https://lore.kernel.org/all/[email-masked]/

[1] https://www.beagleboard.org/boards/beaglebadge
[2] https://github.com/beagleboard/BeagleBadge/blob/main/design/BeagleBadge_RevA_V0.7_SCH_251107.pdf

Judith Mendez (3):
  dt-bindings: arm: ti: Add am62l3-beaglebadge
  arm64: dts: ti: Add k3-am62l3-beaglebadge
  arm64: defconfig: Enable drivers for BeagleBadge

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am62l3-beaglebadge.dts     | 658 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   5 +
 4 files changed, 665 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts

-- 
2.54.0