Subject: [PATCH 3/4] arm64: dts: rockchip: Add crypto node to rk356x-base

From: Dawid Olesinski <[email-masked]>
Date: Sat, 30 May 2026 17:06:44 +0100

Add the device tree node for the V2 cryptographic hardware accelerator
on RK356x SoCs (RK3566, RK3568).

The IP block sits in the non-secure peripheral domain. Its three clocks
(core, aclk, hclk) and reset line are accessible directly through the
main non-secure CRU, so no firmware intermediary is required.

The node is disabled by default; board files that wish to use hardware
crypto offload must enable it.

Signed-off-by: Dawid Olesinski <[email-masked]>
---
 arch/arm64/boot/dts/rockchip/rk356x-base.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
index 64bdd8b7754b..3b73a56046e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
@@ -1171,6 +1171,18 @@ gpu_leakage: gpu-leakage@1d {
 		};
 	};
 
+	crypto: crypto@fe380000 {
+		compatible = "rockchip,rk3568-crypto";
+		reg = <0x0 0xfe380000 0x0 0x2000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_CRYPTO_NS_CORE>, <&cru ACLK_CRYPTO_NS>,
+			 <&cru HCLK_CRYPTO_NS>;
+		clock-names = "core", "aclk", "hclk";
+		resets = <&cru SRST_CRYPTO_NS_CORE>;
+		reset-names = "core";
+		status = "disabled";
+	};
+
 	i2s0_8ch: i2s@fe400000 {
 		compatible = "rockchip,rk3568-i2s-tdm";
 		reg = <0x0 0xfe400000 0x0 0x1000>;
-- 
2.47.3