Subject: [PATCH v3 0/9] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase

From: Colin Huang via B4 Relay <[email-masked]>
Date: Tue, 02 Jun 2026 21:24:55 +0800

This series refactors the Anacapa BMC devicetree layout to better support
development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform
entrypoint.

Signed-off-by: Colin Huang <[email-masked]>
---
Changes in v3:
- Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone.
- Add the DVT devicetree, inheriting from the EVT2 devicetree.
- Enable MCTP and FRU support for the NIC.
- Align PDB fan GPIO numbering.
- Add an EEPROM device node for the NFC adaptor board.
- Add an additional EEPROM device node for the SCM.
- Add shunt resistor values for HSC monitors
- Link to v2: https://lore.kernel.org/r/[email-masked]

Changes in v2:
- Fix dtbs_check fail.
  Validated by following command:
    make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb
- Link to v1: https://lore.kernel.org/r/[email-masked]

---
Andy Chung (1):
      ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC

Carl Lee (1):
      ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board

Colin Huang (5):
      dt-bindings: arm: aspeed: add Anacapa EVT1 EVT2 DVT board
      ARM: dts: aspeed: anacapa: add EVT1 devicetree and point wrapper to it
      ARM: dts: aspeed: anacapa: add EVT2 devicetree inheriting EVT1
      ARM: dts: aspeed: anacapa: add DVT devicetree inheriting EVT2
      ARM: dts: aspeed: anacapa: add additional EEPROM node for SCM

Peter Shen (1):
      ARM: dts: aspeed: anacapa: evt2: add shunt resistor values for HSC monitors

Rex Fu (1):
      ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering

 .../devicetree/bindings/arm/aspeed/aspeed.yaml     |    3 +
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts |  178 +++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dts    | 1179 ++++++++++++++++++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    |  228 ++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1077 +-----------------
 5 files changed, 1589 insertions(+), 1076 deletions(-)
---
base-commit: 7ca1caf017d34396397b19fb4de9ecef256f4acc
change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0

Best regards,
-- 
Colin Huang <[email-masked]>