Subject: [PATCH v5 1/4] dt-bindings: display: bridge: analogix-dp: Add data-lanes support for endpoint

From: Damon Ding <[email-masked]>
Date: Thu, 4 Jun 2026 16:52:17 +0800

Add data-lanes property support to the port@1 endpoint for physical
lane mapping configuration.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

Additionally, add data-lanes setting in Rockchip eDP DT node example
to show actual lane mapping usage.

Acked-by: Conor Dooley <[email-masked]>
Reviewed-by: Sebastian Reichel <[email-masked]>
Signed-off-by: Damon Ding <[email-masked]>

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
- Remove redundant deprecated property 'data-lanes' for eDP node.
- Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.

Changes in v3:
- Squash data-lanes adjustment of Rockchip eDP DT example into this
  commit.
- Add unevaluatedProperties: false to both the port@1 and endpoint
  nodes.

Changes in v5
- Add Acked-by and Reviewed-by tags.
---
 .../bindings/display/bridge/analogix,dp.yaml  | 19 ++++++++++++++-----
 .../rockchip/rockchip,analogix-dp.yaml        |  1 +
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
index 62f0521b0924..ecf206871cdd 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -42,13 +42,22 @@ properties:
     properties:
       port@0:
         $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Input node to receive pixel data.
+        description: Input node to receive pixel data.
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Port node with one endpoint connected to a dp-connector node.
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Port node with one endpoint connected to sink device node.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
 
     required:
       - port@0
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
index 6548f157fd96..39dafe75a680 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -160,6 +160,7 @@ examples:
           reg = <1>;
 
           edp_out_panel: endpoint {
+            data-lanes = <0 1>;
             remote-endpoint = <&panel_in_edp>;
           };
         };
-- 
2.34.1