Subject: [PATCH] ARM: shmobile: porter: add DU DT support

From: [email-masked] (Sergei Shtylyov)
Date: Fri, 25 Dec 2015 01:45:30 +0300

Define  the Porter board dependent part of the DU device node.
Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
and HDMI devices.

Signed-off-by: Sergei Shtylyov <[email-masked]>

---
This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   81 +++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -78,6 +78,29 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -139,6 +162,11 @@
 		renesas,groups = "can0_data";
 		renesas,function = "can0";
 	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		renesas,function = "du";
+	};
 };
 
 &scif0 {
@@ -240,6 +268,38 @@
 			};
 		};
 	};
+
+	hdmi at 39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
 };
 
 &sata0 {
@@ -303,3 +363,24 @@
 
 	status = "okay";
 };
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		 <&mstp7_clks R8A7791_CLK_DU1>,
+		 <&mstp7_clks R8A7791_CLK_LVDS0>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port at 1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};