From: Vignesh Raghavendra <vigneshr@ti•com>
To: Judith Mendez <jm@ti•com>, Nishanth Menon <nm@ti•com>
Cc: Tero Kristo <kristo@kernel•org>, Rob Herring <robh@kernel•org>,
"Krzysztof Kozlowski" <krzk+dt@kernel•org>,
Conor Dooley <conor+dt@kernel•org>,
<linux-arm-kernel@lists•infradead.org>,
<devicetree@vger•kernel.org>, <linux-kernel@vger•kernel.org>,
Andrew Davis <afd@ti•com>, Bryan Brattlof <bb@ti•com>,
Jason Kridner <jkridner@gmail•com>,
Robert Nelson <robertcnelson@gmail•com>,
Conor Dooley <conor.dooley@microchip•com>
Subject: Re: [PATCH v5 2/3] arm64: dts: ti: Add k3-am62l3-beaglebadge
Date: Thu, 28 May 2026 16:22:01 +0530 [thread overview]
Message-ID: <26a43b26-b7d4-4c5d-a286-4ac1869e2d42@ti.com> (raw)
In-Reply-To: <20260526235417.1326187-3-jm@ti.com>
On 27/05/26 05:24, Judith Mendez wrote:
> BeagleBoard.org BeagleBadge is a compact, affordable open source
> hardware single board computer based on the Texas Instruments AM62L3
> SoC designed for IoT and embedded applications with low power
> consumption. Expansion is provided over open standards based headers
> including QWIIC and GPIO interfaces.
>
> https://www.beagleboard.org/boards/beaglebadge
>
> Co-developed-by: Andrew Davis <afd@ti•com>
> Signed-off-by: Andrew Davis <afd@ti•com>
> Signed-off-by: Judith Mendez <jm@ti•com>
> ---
> Changelog since v4:
> - Canonical URL fixed
> - Switch gpio -> gpios in voltage regulator nodes
> - Regulator-always-on removed in sensor_3v3
> - Add bootph-all on pinmux nodes
> - Fix gpio-line-names formatting
> - Nodes: sdhci2, wlan_en regulator, & pinmux removed
> - USB aliases removed
> ---
> arch/arm64/boot/dts/ti/Makefile | 1 +
> .../boot/dts/ti/k3-am62l3-beaglebadge.dts | 658 ++++++++++++++++++
> 2 files changed, 659 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 5269c9619b65c..4e377ca011cd8 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb
>
> # Boards with AM62Lx SoCs
> dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am62l3-beaglebadge.dtb
Sort this alphabetically please
>
> # Boards with AM62Px SoC
> dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts b/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts
> new file mode 100644
> index 0000000000000..8e816d21a586f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts
> @@ -0,0 +1,658 @@
> +// SPDX-License-Identifier: GPL-2.0
Dual license this like other files
// SPDX-License-Identifier: GPL-2.0-only or MIT
[...]
--
Regards
Vignesh
https://ti.com/opensource
next prev parent reply other threads:[~2026-05-28 10:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-26 23:54 [PATCH v5 0/3] arm64: dts/bindings: Add support for BeagleBadge Judith Mendez
2026-05-26 23:54 ` [PATCH v5 1/3] dt-bindings: arm: ti: Add am62l3-beaglebadge Judith Mendez
2026-05-26 23:54 ` [PATCH v5 2/3] arm64: dts: ti: Add k3-am62l3-beaglebadge Judith Mendez
2026-05-28 10:52 ` Vignesh Raghavendra [this message]
2026-05-28 22:04 ` Judith Mendez
2026-05-26 23:54 ` [PATCH v5 3/3] arm64: defconfig: Enable drivers for BeagleBadge Judith Mendez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=26a43b26-b7d4-4c5d-a286-4ac1869e2d42@ti.com \
--to=vigneshr@ti$(echo .)com \
--cc=afd@ti$(echo .)com \
--cc=bb@ti$(echo .)com \
--cc=conor+dt@kernel$(echo .)org \
--cc=conor.dooley@microchip$(echo .)com \
--cc=devicetree@vger$(echo .)kernel.org \
--cc=jkridner@gmail$(echo .)com \
--cc=jm@ti$(echo .)com \
--cc=kristo@kernel$(echo .)org \
--cc=krzk+dt@kernel$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=nm@ti$(echo .)com \
--cc=robertcnelson@gmail$(echo .)com \
--cc=robh@kernel$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox