Subject: [PATCHv3 0/6] Add I2C support for Allwinner SoCs

From: [email-masked] (Tomasz Figa)
Date: Mon, 27 May 2013 21:17:27 +0200

Hi Maxime,

On Monday 27 of May 2013 12:00:37 Maxime Ripard wrote:
> Hi,
> 
> This patchset adds support for the I2C controller found on most of the
> Allwinner SoCs, especially the already supported A10 and A13, and the
> yet to come A31.
> 
> It has been tested on a A13-Olinuxino.
> 
> Thanks,
> Maxime
> 
> Changes from v2:
>   * Slightly modified the switch comments again
>   * Removed the of_* calls in favor of platform_get_* functions
> 
> Changes from v1:
>   * Added comments to the switch statements to clarify when the fall
> through to the next case is made on purpose
>   * Use devm_ioremap_resource instead of of_iomap
>   * Moved the reset after enabling the clocks
>   * Added Emilio Lopez' patch to add the available i2c controllers to
> the cubieboard
> 
> Emilio L?pez (1):
>   ARM: sun4i: cubieboard: Enable the i2c controllers
> 
> Maxime Ripard (5):
>   i2c: sunxi: Add Allwinner A1X i2c driver
>   ARM: sunxi: dt: Add i2c controller nodes to the DTSI
>   ARM: sun4i: dt: Add i2c muxing options
>   ARM: sun5i: dt: Add i2c muxing options
>   ARM: sun5i: olinuxino: Enable the i2c controllers
> 
>  .../devicetree/bindings/i2c/i2c-sunxi.txt          |  19 +
>  arch/arm/boot/dts/sun4i-a10-cubieboard.dts         |  12 +
>  arch/arm/boot/dts/sun4i-a10.dtsi                   |  48 +++
>  arch/arm/boot/dts/sun5i-a13-olinuxino.dts          |  18 +
>  arch/arm/boot/dts/sun5i-a13.dtsi                   |  48 +++
>  drivers/i2c/busses/Kconfig                         |  10 +
>  drivers/i2c/busses/Makefile                        |   1 +
>  drivers/i2c/busses/i2c-sunxi.c                     | 444
> +++++++++++++++++++++ 8 files changed, 600 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sunxi.txt
>  create mode 100644 drivers/i2c/busses/i2c-sunxi.c

All the patches look good to me.

Reviewed-by: Tomasz Figa <[email-masked]>

Best regards,
Tomasz