Subject: [PATCH 23/27] clocksource: sh_cmt: Add DT support

From: [email-masked] (Laurent Pinchart)
Date: Fri, 14 Feb 2014 15:35:54 +0100

Hi Geert,

Thank you for the review.

On Friday 14 February 2014 10:18:58 Geert Uytterhoeven wrote:
> On Fri, Feb 14, 2014 at 2:00 AM, Laurent Pinchart wrote:
> > +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
> > @@ -0,0 +1,75 @@
> > +* Renesas R-Car Compare Match Timer (CMT)
> > +
> > +The CMT is a multi-channel 16/32/48-bit timer/counter with configurable
> > clock
> 16-bit is mentioned here ...
> 
> > +inputs and programmable compare match.
> > +
> > +Channels share hadware resources but their counter and compare match
> > value are
>
> hardware
> 
> > +independent. A particular CMT instance can implement only a subset of the
> > +channels supported by the CMT model. Channels indices start from 0 and
> > are
> 
> Channel indices
> 
> > +consecutive.
> > +
> > +Required Properties:
> > +
> > +  - compatible: must contain one of the following.
> 
> ... why not add "renesas,cmt-16" here (and one extra line in the actual
> driver), while you're at it?

Because the 16-bit variant is only used on SuperH SoCs, so there's not much 
point in adding DT bindings for it.

> > +    - "renesas,cmt-32" for the 32-bit CMT
> > +               (CMT0 on sh7372, sh73a0 and r8a7740)
> > +    - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
> > +               (CMT[234] on sh7372, sh73a0 and r8a7740)
> > +    - "renasas,cmt-48" for the 48-bit CMT
> > +               (CMT1 on sh7372, sh73a0 and r8a7740)
> > +    - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
> > +               (CMT[01] on r8a73a4, r8a7790 and r8a7791)

-- 
Regards,

Laurent Pinchart