Subject: [PATCH v2] clk-divider: make sure read-only dividers do not write to their register

From: [email-masked] (Heiko Stuebner)
Date: Wed, 20 Jan 2016 20:51:06 +0100

Commit e6d5e7d90be9 ("clk-divider: Fix READ_ONLY when divider > 1") removed
the special ops struct for read-only clocks and instead opted to handle
them regularly.

On the rk3368 this results in breakage as aclkm now gets set a value.
While it is the same divider value, the A53 core still doesn't like it,
which can result in the cpu ending up in a hang.
The reason being that "ACLKENMasserts one clock cycle before the rising
edge of ACLKM" and the clock should only be touched when STANDBYWFIL2
is asserted.

So make sure read-only clocks don't touch the clock-register at all
even if only writing the same value, as even writing the same value
may not be safe in all cases.

Fixes: e6d5e7d90be9 ("clk-divider: Fix READ_ONLY when divider > 1")
Reported-by: Zhang Qing <[email-masked]>
Signed-off-by: Heiko Stuebner <[email-masked]>
Reviewed-by: James Hogan <[email-masked]>
---
changes in v2:
- emphasize that even setting the same divider may be unsafe

 drivers/clk/clk-divider.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index ded3ff4..6dfe261 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -391,6 +391,10 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned long flags = 0;
 	u32 val;
 
+	/* don't do writes in read-only case, as it may be unsafe */
+	if (divider->flags & CLK_DIVIDER_READ_ONLY)
+		return 0;
+
 	value = divider_get_val(rate, parent_rate, divider->table,
 				divider->width, divider->flags);
 
-- 
2.6.4