Subject: [PATCH 11/19] clk: samsung: exynos5433: Add clocks for CMU_BUS{0|1|2} domains

From: [email-masked] (Arnd Bergmann)
Date: Thu, 27 Nov 2014 16:51:35 +0100

On Friday 28 November 2014 00:44:07 Chanwoo Choi wrote:
> >
> >> +#define bus_div_clks(num)                        \
> >> +static struct samsung_div_clock bus##num_div_clks[] __initdata = {    \
> >> +    /* DIV_BUS */                            \
> >> +    DIV(CLK_DIV_PCLK_BUS##num_133, "div_pclk_bus"#num"_133",    \
> >> +            "aclk_bus"#num"_400", DIV_BUS##num, 0, 3),    \
> >> +};                                    \
> >
> > To illustrate my point further: CLK_DIV_PCLK_BUS0/1/2 are all the
> > same, and so are DIV_BUS0/1/2, so you should not need to duplicate
> > the definitions at all but just call them 'CLK_DIV_PCLK_BUS'
> > and 'DIV_BUS'.
> 
> CLK_DIV_PCLK_BUS0/1/2 is not all the same.
> Each CLK_DIV_PCLK_BUS0/1/2 must need the unique clock number.
> Because some device may need some clocks by using unique clock number.

This is from your original patch:

+/* CMU_BUS0 */
+#define CLK_DIV_PCLK_BUS0_133                          1
+
+#define CLK_ACLK_AHB2APB_BUS0P                         2
+#define CLK_ACLK_BUS0NP_133                            3
+#define CLK_ACLK_BUS0ND_400                            4
+#define CLK_PCLK_BUS0SRVND_133                         5
+#define CLK_PCLK_PMU_BUS0                              6
+#define CLK_PCLK_SYSREG_BUS0                           7
+
+#define BUS0_NR_CLK                                    8
+
+/* CMU_BUS1 */
+#define CLK_DIV_PCLK_BUS1_133                          1
+
+#define CLK_ACLK_AHB2APB_BUS1P                         2
+#define CLK_ACLK_BUS1NP_133                            3
+#define CLK_ACLK_BUS1ND_400                            4
+#define CLK_PCLK_BUS1SRVND_133                         5
+#define CLK_PCLK_PMU_BUS1                              6
+#define CLK_PCLK_SYSREG_BUS1                           7
+
+#define BUS1_NR_CLK                                    8
+
+/* CMU_BUS2 */
+#define CLK_MOUT_ACLK_BUS2_400_USER                    1
+
+#define CLK_DIV_PCLK_BUS2_133                          2
+
+#define CLK_ACLK_AHB2APB_BUS2P                         3
+#define CLK_ACLK_BUS2NP_133                            4
+#define CLK_ACLK_BUS2BEND_400                          5
+#define CLK_ACLK_BUS2RTND_400                          6
+#define CLK_PCLK_BUS2SRVND_133                         7
+#define CLK_PCLK_PMU_BUS2                              8
+#define CLK_PCLK_SYSREG_BUS2                           9
+
+#define BUS2_NR_CLK                                    10

The numbers are arbitrarily assigned, but for bus0 and bus1,
they are all identical, while bus2 uses a lightly different
numbering, which you could easily change, e.g. by using the
numbers you have for bus2 on bus0 and bus1 as well.

+ * Register offset definitions for CMU_BUS0
+ */
+#define DIV_BUS0                       0x0600
+#define DIV_STAT_BUS0                  0x0700
+#define ENABLE_ACLK_BUS0               0x0800
+#define ENABLE_PCLK_BUS0               0x0900
+#define ENABLE_IP_BUS0                 0x0b00
+#define ENABLE_IP_BUS1                 0x0b04
+

+/*
+ * Register offset definitions for CMU_BUS1
+ */
+#define DIV_BUS1                       0x0600
+#define DIV_STAT_BUS1                  0x0700
+#define ENABLE_ACLK_BUS1               0x0800
+#define ENABLE_PCLK_BUS1               0x0900
+#define ENABLE_IP_BUS10                        0x0b00
+#define ENABLE_IP_BUS11                        0x0b04

+/*
+ * Register offset definitions for CMU_BUS2
+ */
+#define MUX_SEL_BUS2                   0x0200
+#define MUX_ENABLE_BUS2                        0x0300
+#define MUX_STAT_BUS2                  0x0400
+#define DIV_BUS2                       0x0600
+#define DIV_STAT_BUS2                  0x0700
+#define ENABLE_ACLK_BUS2               0x0800
+#define ENABLE_PCLK_BUS2               0x0900
+#define ENABLE_IP_BUS20                        0x0b00
+#define ENABLE_IP_BUS21                        0x0b04

More importantly, the register offsets are all identical, except that
bus2 has the additional MUX_SEL and MUX_ENABLE definitions. It's very
obvious that this is the same hardware block in multiple instances.

	Arnd