From: rumjantsev@papillon•ru (237 Rumjantsev Egor (PROG))
To: linux-arm-kernel@lists•infradead.org
Subject: vpack270 and sleep mode
Date: Tue, 25 May 2010 21:35:18 +0600 [thread overview]
Message-ID: <4BFBEE36.6000004@papillon.ru> (raw)
In-Reply-To: <201005251702.21204.marek.vasut@gmail.com>
25.05.2010 21:02, Marek Vasut ?????:
> Dne ?t 25. kv?tna 2010 15:26:54 237 Rumjantsev Egor (PROG) napsal(a):
>> 25.05.2010 18:39, Marek Vasut ?????:
>>> Dne ?t 25. kv?tna 2010 14:38:09 Marek Vasut napsal(a):
>>>> Dne ?t 25. kv?tna 2010 14:13:01 237 Rumjantsev Egor (PROG) napsal(a):
>>>>> Hello, Marek
>>>>
>>>> Hi,
>>>>
>>>>> Could you help to solve the following problem:
>>>>> I try to move my board based on Voipac PXA270 module to sleep state.
>>>>> I'm running kernel 2.6.28.10 on it.
>>>>
>>>> CCed Voipac and linux-arm-kernel. Btw. that's not Voipac official
>>>> kernel, is it?
>>
>> Yes it isn't. I patched vanilla kernel to get basic Voipac module
>> support and add some my code for our board.
>
> Please, use what's in mainline then. (git.kernel.org, search for ycmiao, use -
> devel branch).
i did so. I downloaded 2.6.28.10 sources, patched it to get basic
support for Voipac module and add some my platform devices.
>>
>>> My bad, CCed wrong linux-arm-kernel, fixed now :)
>>>
>>>>> When i try echo mem> /sys/power/state i see messages that system goes
>>>>> to sleep state but after pushing wake-up button (GPIO0) i don't see
>>>>> that a bootloader is running (i set up some GPIOs as flags in
>>>>> bootloader and see on them whith oscilloscope).
>>>>
>>>> The bootloader checks RCSR once you wake it up and it sets-up SDRAM. If
>>>> there's a sleep-wakeup bit, it branches to location in PSPR and there's
>>>> linux kernel already.
>>
>> i know that as i have to use U-boot 1.3.0 for my board. It's also not
>> Voipac's u-boot version.
>
> Can't you use u-boot-pxa from git.denx.de ?
u-boot-2009.11.1 haven't Voipac or Toradex Colibri support.
>>>>>
>>>>> but if i type command echo standby> /sys/power/state
>>>>> the system reacts on wake-up button but hangs after some messages about
>>>>> null dereferencing pointers.
>>>>>
>>>>> is there any possibility to trace such problem?
>>>>
>>>> Try CONFIG_PM_ADVANCED_DEBUG.
>>
>> i've looked through kernel sources and didn't such identifer
>>
> Maybe you need newer kernel, see above.
May be....but then i need to rewrite some of hardware drivers as drivers
api for some kind of devices has changed since 2.6.28.
When i run 2.6.24 kernel on Toradex Colibri module i haven't such
troubles so i hope that 2.6.28 can work with sleep mode.
>
> What's pxa_reg module? Does it have proper suspend/resume functions?
No, it doesn't. I unloaded it but all the same - kernel hangs
>>
>>>> There was also a way to keep the console enabled until the kernel didn't
>>>> totally suspend, but I can't find that option now, maybe someone will be
>>>> more successful. And maybe I'm mistaking this with an option to don't
>>>> blank consoles until then, it's been some time since I needed that.
>>>>
>>>>> P.S.: sorry if i disturb you, but you the only man in ARM linux mailing
>>>>> list who posted messages about Voipac modules.
>>>>
>>>> You're welcome.
>>>>
>>>>> Best regards !!!
>
--
Rumjantsev Egor
next prev parent reply other threads:[~2010-05-25 15:35 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-26 19:46 [PATCH] pxa/vpac270: add ide support Marek Vasut
2010-04-26 21:05 ` Daniel Mack
2010-04-26 21:15 ` Marek Vasut
[not found] ` <4BFBBECD.70803@papillon.ru>
[not found] ` <201005251438.09494.marek.vasut@gmail.com>
2010-05-25 12:39 ` vpack270 and sleep mode Marek Vasut
2010-05-25 13:26 ` 237 Rumjantsev Egor (PROG)
2010-05-25 15:02 ` Marek Vasut
2010-05-25 15:35 ` 237 Rumjantsev Egor (PROG) [this message]
2010-05-25 20:24 ` Russell King - ARM Linux
2010-05-25 20:47 ` Marek Vasut
2010-05-26 3:47 ` 237 Rumjantsev Egor (PROG)
2010-05-26 9:07 ` Russell King - ARM Linux
2010-05-26 9:19 ` 237 Rumjantsev Egor (PROG)
2010-05-26 9:27 ` Russell King - ARM Linux
2010-05-26 9:50 ` 237 Rumjantsev Egor (PROG)
2010-05-26 9:50 ` Lothar Waßmann
2010-05-26 10:43 ` 237 Rumjantsev Egor (PROG)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BFBEE36.6000004@papillon.ru \
--to=rumjantsev@papillon$(echo .)ru \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox