Subject: [PATCH v3 05/12] s3c-fb: Add support for display panning

From: [email-masked] (Ben Dooks)
Date: Fri, 02 Jul 2010 12:24:11 +0100

On 28/06/10 09:08, Pawel Osciak wrote:
> Supports all bpp modes.
> 
> The PRTCON register is used to disable in-hardware updates of registers
> that store start and end addresses of framebuffer memory. This prevents
> display corruption in case we do not make it before VSYNC with updating
> them atomically. With this feature there is no need to wait for a VSYNC
> interrupt before each such update.
> 
> Signed-off-by: Pawel Osciak <[email-masked]>
> Signed-off-by: Kyungmin Park <[email-masked]>
> ---
>  arch/arm/plat-samsung/include/plat/regs-fb.h |    5 ++
>  drivers/video/s3c-fb.c                       |   71 ++++++++++++++++++++++++++
>  2 files changed, 76 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
> index ac10013..f454e32 100644
> --- a/arch/arm/plat-samsung/include/plat/regs-fb.h
> +++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
> @@ -112,6 +112,11 @@
>  #define VIDCON2_ORGYCbCr			(1 << 8)
>  #define VIDCON2_YUVORDCrCb			(1 << 7)
>  
> +/* PRTCON (S3C6410, S5PC100) */

Not listed in my S3C6410 manual?

> +#define PRTCON					(0x0c)
> +#define PRTCON_PROTECT				(1 << 11)
> +
>  /* VIDTCON0 */
>  
>  #define VIDTCON0_VBPDE_MASK			(0xff << 24)
> diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
> index 59ac76a..4f3680d 100644
> --- a/drivers/video/s3c-fb.c
> +++ b/drivers/video/s3c-fb.c
> @@ -71,6 +71,7 @@ struct s3c_fb;
>   * @buf_end: Offset of buffer end registers.
>   * @osd: The base for the OSD registers.
>   * @palette: Address of palette memory, or 0 if none.
> + * @has_prtcon: Set if has PRTCON register.
>   */
>  struct s3c_fb_variant {
>  	unsigned int	is_2443:1;
> @@ -85,6 +86,8 @@ struct s3c_fb_variant {
>  	unsigned short	osd;
>  	unsigned short	osd_stride;
>  	unsigned short	palette[S3C_FB_MAX_WIN];
> +
> +	unsigned int	has_prtcon:1;
>  };
>  
>  /**
> @@ -379,6 +382,9 @@ static int s3c_fb_set_par(struct fb_info *info)
>  
>  	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
>  
> +	info->fix.xpanstep = info->var.xres_virtual > info->var.xres ? 1 : 0;
> +	info->fix.ypanstep = info->var.yres_virtual > info->var.yres ? 1 : 0;
> +
>  	/* disable the window whilst we update it */
>  	writel(0, regs + WINCON(win_no));
>  
> @@ -735,6 +741,66 @@ static int s3c_fb_blank(int blank_mode, struct fb_info *info)
>  	return 0;
>  }
>  
> +/**
> + * s3c_fb_pan_display() - Pan the display.
> + *
> + * Note that the offsets can be written to the device at any time, as their
> + * values are latched at each vsync automatically. This also means that only
> + * the last call to this function will have any effect on next vsync, but
> + * there is no need to sleep waiting for it to prevent tearing.
> + *
> + * @var: The screen information to verify.
> + * @info: The framebuffer device.
> + */
> +static int s3c_fb_pan_display(struct fb_var_screeninfo *var,
> +			      struct fb_info *info)
> +{
> +	struct s3c_fb_win *win	= info->par;
> +	struct s3c_fb *sfb	= win->parent;
> +	void __iomem *buf	= sfb->regs + win->index * 8;
> +	unsigned int start_byte_offset, end_byte_offset;

could have shortened to start and end, might have made some of the
calculation easier.

> +	/* Offset in bytes to the start of the displayed area */
> +	start_byte_offset = var->yoffset * info->fix.line_length;
> +	/* X offset depends on the current bpp */
> +	if (info->var.bits_per_pixel >= 8) {
> +		start_byte_offset +=
> +			var->xoffset * (info->var.bits_per_pixel >> 3);
> +	} else {
> +		switch (info->var.bits_per_pixel) {
> +		case 4:
> +			start_byte_offset += var->xoffset >> 1;
> +			break;
> +		case 2:
> +			start_byte_offset += var->xoffset >> 2;
> +			break;
> +		case 1:
> +			start_byte_offset += var->xoffset >> 3;
> +			break;
> +		default:
> +			dev_err(sfb->dev, "invalid bpp\n");
> +			return -EINVAL;
> +		}
> +	}

this could have been done by changing it to
start_byte_offset += var->xoffset / (8 / info->var.bits_per_pixel);

note, you always set pan step to 1, evne if the case of bpp less than 8.

> +	/* Offset in bytes to the end of the displayed area */
> +	end_byte_offset = start_byte_offset + var->yres * info->fix.line_length;
> +
> +	/* Temporarily turn off per-vsync update from shadow registers until
> +	 * both start and end addresses are updated to prevent corruption */
> +	if (sfb->variant.has_prtcon)
> +		writel(PRTCON_PROTECT, sfb->regs + PRTCON);
> +
> +	writel(info->fix.smem_start + start_byte_offset,
> +		buf + sfb->variant.buf_start);
> +	writel(info->fix.smem_start + end_byte_offset,
> +		buf + sfb->variant.buf_end);
> +
> +	if (sfb->variant.has_prtcon)
> +		writel(0, sfb->regs + PRTCON);
> +
> +	return 0;
> +}
> +
>  static struct fb_ops s3c_fb_ops = {
>  	.owner		= THIS_MODULE,
>  	.fb_check_var	= s3c_fb_check_var,
> @@ -744,6 +810,7 @@ static struct fb_ops s3c_fb_ops = {
>  	.fb_fillrect	= cfb_fillrect,
>  	.fb_copyarea	= cfb_copyarea,
>  	.fb_imageblit	= cfb_imageblit,
> +	.fb_pan_display	= s3c_fb_pan_display,
>  };
>  
>  /**
> @@ -1243,6 +1310,8 @@ static struct s3c_fb_driverdata s3c_fb_data_64xx __devinitdata = {
>  			[3] = 0x320,
>  			[4] = 0x340,
>  		},
> +
> +		.has_prtcon	= 1,
>  	},
>  	.win[0]	= &s3c_fb_data_64xx_wins[0],
>  	.win[1]	= &s3c_fb_data_64xx_wins[1],
> @@ -1271,6 +1340,8 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pc100 __devinitdata = {
>  			[3] = 0x3000,
>  			[4] = 0x3400,
>  		},
> +
> +		.has_prtcon	= 1,
>  	},
>  	.win[0]	= &s3c_fb_data_64xx_wins[0],
>  	.win[1]	= &s3c_fb_data_64xx_wins[1],