public inbox for linux-arm-kernel@lists.infradead.org 
 help / color / mirror / Atom feed
From: grinberg@compulab•co.il (Igor Grinberg)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine
Date: Tue, 12 Jul 2011 18:56:39 +0300	[thread overview]
Message-ID: <4E1C6EB7.80506@compulab.co.il> (raw)
In-Reply-To: <CACTFLAPB0JE9FJc8jdbaoME_qmPbN1N-HyPVN7Kb5-op6Pa1EA@mail.gmail.com>

On 07/12/11 15:02, Daniel Mack wrote:

> On Tue, Jul 12, 2011 at 1:39 PM, Daniel Mack <zonque@gmail•com> wrote:
>> On Tue, Jul 12, 2011 at 12:28 PM, Lei Wen <leiwen@marvell•com> wrote:
>>> This patch add protection on the suspend&resume path to prevent
>>> some unexpected behavior, like interrupt occur at the very second
>>> of resume back and it don't follow normal command path, which lead
>>> to bug.
>>>
>>> Signed-off-by: Lei Wen <leiwen@marvell•com>
>>> ---
>>>  drivers/mtd/nand/pxa3xx_nand.c |   28 ++++++++++++++++++++++++++++
>>>  1 files changed, 28 insertions(+), 0 deletions(-)
>>>
>> [...]
>>
>>> @@ -1267,6 +1283,18 @@ static int pxa3xx_nand_resume(struct platform_device *pdev)
>>>        info->cs = 0xff;
>>>        clk_enable(info->clk);
>>>
>>> +       /*
>>> +        * As the spec, the NDSR would be updated to 0x1800 when
>>> +        * do the nand_clk disable/enable.
>>> +        * To prevent it damage state machine of the driver, clear
>>> +        * all status before resume
>>> +        */
>>> +       nand_writel(nand, NDSR, NDSR_MASK);
>> This doesn't build:
>>
>>  CC      drivers/mtd/nand/pxa3xx_nand.o
>> drivers/mtd/nand/pxa3xx_nand.c: In function 'pxa3xx_nand_resume':
>> drivers/mtd/nand/pxa3xx_nand.c:1292: error: 'nand' undeclared (first
>> use in this function)
>> drivers/mtd/nand/pxa3xx_nand.c:1292: error: (Each undeclared
>> identifier is reported only once
>> drivers/mtd/nand/pxa3xx_nand.c:1292: error: for each function it appears in.)
>> drivers/mtd/nand/pxa3xx_nand.c:1294: error: 'mtd' undeclared (first
>> use in this function)
>> make[3]: *** [drivers/mtd/nand/pxa3xx_nand.o] Error 1
>>
>> I guess this was not even compile tested? Anyway, I did a trivial
>> fix-up and will test.
> Also, with this (fixed) patch applied, the system doesn't resume at
> all. No messages, it simply doesn't come back.

I was skeptic about the clock being disabled in Lei's patch,
as I observed system hangs if that clock was disabled back then in 2.6.31,
but wanted to give it a try, because things has changed since then.

Now I see, that Lei already sent v7 without clock toggling...



-- 
Regards,
Igor.

  reply	other threads:[~2011-07-12 15:56 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-08 16:00 [PATCH] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-06-22 11:39 ` Daniel Mack
2011-07-08 17:38   ` Lei Wen
2011-06-22 13:06     ` Daniel Mack
2011-06-23  6:22       ` Lei Wen
2011-07-08 16:09 ` Igor Grinberg
2011-07-08 15:26   ` Lei Wen
2011-06-23 10:44     ` Igor Grinberg
2011-06-25 11:17       ` Lei Wen
2011-06-25 12:32         ` Daniel Mack
2011-06-25 12:51           ` Lei Wen
2011-06-27 13:22         ` Igor Grinberg
2011-06-28  7:32         ` Artem Bityutskiy
2011-06-28 15:12           ` Lei Wen
2011-06-29  3:51           ` [PATCH V3 0/9] pxa3xx_nand: add two " Lei Wen
2011-06-29  9:00             ` Igor Grinberg
2011-06-29 10:20               ` Artem Bityutskiy
2011-07-04  9:27                 ` Lei Wen
2011-07-04  9:25             ` [PATCH V4 0/4] " Lei Wen
2011-07-08  3:34               ` [PATCH V5 0/3] " Lei Wen
2011-07-12 10:28                 ` [PATCH V6 0/4] " Lei Wen
2011-07-12 14:35                   ` [PATCH V7 " Lei Wen
2011-07-15  3:44                     ` [PATCH V8 " Lei Wen
2011-07-20  4:51                       ` Artem Bityutskiy
2011-07-15  3:44                     ` [PATCH V8 1/4] MTD: pxa3xx_nand: enhance suspend and resume routine Lei Wen
2011-07-15  3:44                     ` [PATCH V8 2/4] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-15  3:44                     ` [PATCH V8 3/4] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-15  3:44                     ` [PATCH V8 4/4] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-12 14:35                   ` [PATCH V7 1/4] MTD: pxa3xx_nand: enhance suspend and resume routine Lei Wen
2011-07-13 10:53                     ` Sergei Shtylyov
2011-07-12 14:35                   ` [PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-13 10:57                     ` Sergei Shtylyov
2011-07-13 12:41                       ` Lei Wen
2011-07-13 14:35                         ` Sergei Shtylyov
2011-07-12 14:35                   ` [PATCH V7 3/4] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-12 14:35                   ` [PATCH V7 4/4] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-12 10:28                 ` [PATCH V6 1/4] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-12 10:28                 ` [PATCH V6 2/4] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-12 10:28                 ` [PATCH V6 3/4] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-12 10:28                 ` [PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine Lei Wen
2011-07-12 11:39                   ` Daniel Mack
2011-07-12 12:02                     ` Daniel Mack
2011-07-12 15:56                       ` Igor Grinberg [this message]
2011-07-12 17:35                         ` Daniel Mack
2011-07-08  3:34               ` [PATCH 1/3] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-08  3:34               ` [PATCH 2/3] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-08  3:34               ` [PATCH 3/3] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-04  9:25             ` [PATCH 1/4] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-04  9:25             ` [PATCH 2/4] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-06  7:29               ` Igor Grinberg
2011-07-04  9:25             ` [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-06  6:53               ` Artem Bityutskiy
2011-07-06  6:54                 ` Lei Wen
2011-07-06  7:07                   ` Artem Bityutskiy
2011-07-06  7:41               ` Igor Grinberg
2011-07-07  6:26                 ` Lei Wen
2011-07-07  8:59                   ` Igor Grinberg
2011-07-07  9:06                     ` Lei Wen
2011-07-07 11:23                       ` Igor Grinberg
2011-07-11 14:49                 ` Daniel Mack
2011-07-11 18:19                   ` Igor Grinberg
2011-07-11 18:53                     ` Daniel Mack
2011-07-11 19:25                       ` Igor Grinberg
2011-07-12  9:40                         ` Lei Wen
2011-07-12  9:57                           ` Daniel Mack
2011-07-12 10:29                             ` Lei Wen
2011-07-12 12:05                               ` Daniel Mack
2011-07-12 12:48                         ` Daniel Mack
2011-07-12 15:49                           ` Igor Grinberg
2011-07-04  9:25             ` [PATCH 4/4] ARM: mmp/pxa: fix nand platform data Lei Wen
2011-06-29  3:51           ` [PATCH 1/9] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-06-29  3:51           ` [PATCH 2/9] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-06-29  7:11             ` Artem Bityutskiy
2011-06-29  7:16               ` Lei Wen
2011-06-29  3:51           ` [PATCH 3/9] ARM: aspenite: fix nand platform data Lei Wen
2011-06-29  3:51           ` [PATCH 4/9] ARM: cm-x300: " Lei Wen
2011-06-29  3:51           ` [PATCH 5/9] ARM: colibri-pxa3xx: " Lei Wen
2011-06-29  3:51           ` [PATCH 6/9] ARM: littleton: " Lei Wen
2011-06-29  3:51           ` [PATCH 7/9] ARM: mxm8x10: " Lei Wen
2011-06-29  3:51           ` [PATCH 8/9] ARM: raumfeld: " Lei Wen
2011-06-29  3:51           ` [PATCH 9/9] ARM: zylonite: " Lei Wen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E1C6EB7.80506@compulab.co.il \
    --to=grinberg@compulab$(echo .)co.il \
    --cc=linux-arm-kernel@lists$(echo .)infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox