public inbox for linux-arm-kernel@lists.infradead.org 
 help / color / mirror / Atom feed
From: sshtylyov@mvista•com (Sergei Shtylyov)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_*
Date: Wed, 13 Jul 2011 14:57:34 +0400	[thread overview]
Message-ID: <4E1D7A1E.1020802@mvista.com> (raw)
In-Reply-To: <1310481336-13230-3-git-send-email-leiwen@marvell.com>

Hello.

On 12-07-2011 18:35, Lei Wen wrote:

> Signed-off-by: Lei Wen<leiwen@marvell•com>
> ---
>   drivers/mtd/nand/pxa3xx_nand.c |   27 ++++++++++++++++-----------
>   1 files changed, 16 insertions(+), 11 deletions(-)

> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 1efecf7..afe14bd 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
[...]
> @@ -774,11 +774,15 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
>   	struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
>   	uint32_t ndcr = 0x0; /* enable all interrupts */
>
> -	if (f->page_size != 2048 && f->page_size != 512)
> +	if (f->page_size != 2048 && f->page_size != 512) {
> +		dev_err(&pdev->dev, "Current only support 2048 and 512 size\n");
>   		return -EINVAL;
> +	}
>
> -	if (f->flash_width != 16 && f->flash_width != 8)
> +	if (f->flash_width != 16 && f->flash_width != 8) {
> +		dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");

    So this patch not only converts printk() to dev_*() calls, it also adds 
some dev_err() calls? This should have been mentioned in the change long at 
least...

>   		return -EINVAL;
> +	}
>
>   	/* calculate flash information */
>   	info->cmdset =&default_cmdset;
> @@ -898,7 +902,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>   	if (!ret) {
>   		kfree(mtd);
>   		info->mtd = NULL;
> -		printk(KERN_INFO "There is no nand chip on cs 0!\n");
> +		dev_info(&info->pdev->dev, "There is no nand chip on cs 0!\n");
>
>   		return -EINVAL;
>   	}
> @@ -906,11 +910,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>   	chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
>   	id = *((uint16_t *)(info->data_buff));
>   	if (id != 0)
> -		printk(KERN_INFO "Detect a flash id %x\n", id);
> +		dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
>   	else {
>   		kfree(mtd);
>   		info->mtd = NULL;
> -		printk(KERN_WARNING "Read out ID 0, potential timing set wrong!!\n");
> +		dev_warn(&info->pdev->dev, "Read out ID 0, "
> +				"potential timing set wrong!!\n");

    Don't break the string -- this prevents grepping for it.

WBR, Sergei

  reply	other threads:[~2011-07-13 10:57 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-08 16:00 [PATCH] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-06-22 11:39 ` Daniel Mack
2011-07-08 17:38   ` Lei Wen
2011-06-22 13:06     ` Daniel Mack
2011-06-23  6:22       ` Lei Wen
2011-07-08 16:09 ` Igor Grinberg
2011-07-08 15:26   ` Lei Wen
2011-06-23 10:44     ` Igor Grinberg
2011-06-25 11:17       ` Lei Wen
2011-06-25 12:32         ` Daniel Mack
2011-06-25 12:51           ` Lei Wen
2011-06-27 13:22         ` Igor Grinberg
2011-06-28  7:32         ` Artem Bityutskiy
2011-06-28 15:12           ` Lei Wen
2011-06-29  3:51           ` [PATCH V3 0/9] pxa3xx_nand: add two " Lei Wen
2011-06-29  9:00             ` Igor Grinberg
2011-06-29 10:20               ` Artem Bityutskiy
2011-07-04  9:27                 ` Lei Wen
2011-07-04  9:25             ` [PATCH V4 0/4] " Lei Wen
2011-07-08  3:34               ` [PATCH V5 0/3] " Lei Wen
2011-07-12 10:28                 ` [PATCH V6 0/4] " Lei Wen
2011-07-12 14:35                   ` [PATCH V7 " Lei Wen
2011-07-15  3:44                     ` [PATCH V8 " Lei Wen
2011-07-20  4:51                       ` Artem Bityutskiy
2011-07-15  3:44                     ` [PATCH V8 1/4] MTD: pxa3xx_nand: enhance suspend and resume routine Lei Wen
2011-07-15  3:44                     ` [PATCH V8 2/4] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-15  3:44                     ` [PATCH V8 3/4] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-15  3:44                     ` [PATCH V8 4/4] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-12 14:35                   ` [PATCH V7 1/4] MTD: pxa3xx_nand: enhance suspend and resume routine Lei Wen
2011-07-13 10:53                     ` Sergei Shtylyov
2011-07-12 14:35                   ` [PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-13 10:57                     ` Sergei Shtylyov [this message]
2011-07-13 12:41                       ` Lei Wen
2011-07-13 14:35                         ` Sergei Shtylyov
2011-07-12 14:35                   ` [PATCH V7 3/4] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-12 14:35                   ` [PATCH V7 4/4] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-12 10:28                 ` [PATCH V6 1/4] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-12 10:28                 ` [PATCH V6 2/4] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-12 10:28                 ` [PATCH V6 3/4] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-12 10:28                 ` [PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine Lei Wen
2011-07-12 11:39                   ` Daniel Mack
2011-07-12 12:02                     ` Daniel Mack
2011-07-12 15:56                       ` Igor Grinberg
2011-07-12 17:35                         ` Daniel Mack
2011-07-08  3:34               ` [PATCH 1/3] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-08  3:34               ` [PATCH 2/3] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-08  3:34               ` [PATCH 3/3] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-04  9:25             ` [PATCH 1/4] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-07-04  9:25             ` [PATCH 2/4] MTD: pxa3xx_nand: sperate each chip individual info Lei Wen
2011-07-06  7:29               ` Igor Grinberg
2011-07-04  9:25             ` [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-07-06  6:53               ` Artem Bityutskiy
2011-07-06  6:54                 ` Lei Wen
2011-07-06  7:07                   ` Artem Bityutskiy
2011-07-06  7:41               ` Igor Grinberg
2011-07-07  6:26                 ` Lei Wen
2011-07-07  8:59                   ` Igor Grinberg
2011-07-07  9:06                     ` Lei Wen
2011-07-07 11:23                       ` Igor Grinberg
2011-07-11 14:49                 ` Daniel Mack
2011-07-11 18:19                   ` Igor Grinberg
2011-07-11 18:53                     ` Daniel Mack
2011-07-11 19:25                       ` Igor Grinberg
2011-07-12  9:40                         ` Lei Wen
2011-07-12  9:57                           ` Daniel Mack
2011-07-12 10:29                             ` Lei Wen
2011-07-12 12:05                               ` Daniel Mack
2011-07-12 12:48                         ` Daniel Mack
2011-07-12 15:49                           ` Igor Grinberg
2011-07-04  9:25             ` [PATCH 4/4] ARM: mmp/pxa: fix nand platform data Lei Wen
2011-06-29  3:51           ` [PATCH 1/9] MTD: pxa3xx_nand: convert all printk into dev_* Lei Wen
2011-06-29  3:51           ` [PATCH 2/9] MTD: pxa3xx_nand: enable multiple chip select support Lei Wen
2011-06-29  7:11             ` Artem Bityutskiy
2011-06-29  7:16               ` Lei Wen
2011-06-29  3:51           ` [PATCH 3/9] ARM: aspenite: fix nand platform data Lei Wen
2011-06-29  3:51           ` [PATCH 4/9] ARM: cm-x300: " Lei Wen
2011-06-29  3:51           ` [PATCH 5/9] ARM: colibri-pxa3xx: " Lei Wen
2011-06-29  3:51           ` [PATCH 6/9] ARM: littleton: " Lei Wen
2011-06-29  3:51           ` [PATCH 7/9] ARM: mxm8x10: " Lei Wen
2011-06-29  3:51           ` [PATCH 8/9] ARM: raumfeld: " Lei Wen
2011-06-29  3:51           ` [PATCH 9/9] ARM: zylonite: " Lei Wen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E1D7A1E.1020802@mvista.com \
    --to=sshtylyov@mvista$(echo .)com \
    --cc=linux-arm-kernel@lists$(echo .)infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox