From: rnayak@ti•com (Rajendra Nayak)
To: linux-arm-kernel@lists•infradead.org
Subject: [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support
Date: Wed, 10 Aug 2011 10:56:31 +0530 [thread overview]
Message-ID: <4E421687.1060409@ti.com> (raw)
In-Reply-To: <1312897232-4792-1-git-send-email-manjugk@ti.com>
On 8/9/2011 7:40 PM, G, Manjunath Kondaiah wrote:
>
> This is in continuation of patch series posted at:
> http://lwn.net/Articles/451917/
>
> Patches from Kevin Hilman and others are consolidated along with this
> series since it will be part of ongoing work of decoupling pdev from
> omap_device.
> [There is latest version posted which will be rebased later]
>
> Apart from the above, the major feature included in this series is
> dt-hwmod binding and preparing omap hwmod framework for adapting omap
> drivers to support omap dt after aligning with Grant Likely
> <grant.likely@secretlab•ca>
>
> However, current hwmod-dt binding will be replaced with notifiers in
> generic board file and hwmod device pointer will be scanned and attached
> in notifier call.
>
> Used 3.0 stable kernel version for this patch series since latest mainline
> was broken for beagle boot last week.
>
> git://git.secretlab.ca/git/linux-2.6.git
> Branch: devicetree/test-3.0
Is there a reason why these are based on devicetree/test-3.0 and
not devicetree/test?
>
> G, Manjunath Kondaiah (6):
> dt: omap: prepare hwmod to support dt
> dt: Add pd_size to AUXDATA structure
> dt: omap3: add soc file for handling i2c controllers
> dt: omap3: beagle board: set clock freq for i2c devices
> dt: omap3: add generic board file for dt support
> dt: omap3: enable dt support for i2c1 controller
>
> Kevin Hilman (7):
> OMAP: omap_device: replace _find_by_pdev() with to_omap_device()
> OMAP: omap_device: replace debug/warning/error prints with dev_*
> macros
> OMAP3: beagle: don't touch omap_device internals
> OMAP: McBSP: use existing macros for converting between devices
> OMAP: omap_device: remove internal functions from omap_device.h
> OMAP: omap_device: when building return platform_device instead of
> omap_device
> ARM: platform_device: pdev_archdata: add omap_device pointer
>
> Tony Lindgren (1):
> omap2+: Use Kconfig symbol in Makefile instead of obj-y
>
> arch/arm/boot/dts/omap3-beagle-nunchuck.dts | 11 +--
> arch/arm/boot/dts/omap3-beagle.dts | 18 +++-
> arch/arm/boot/dts/omap3-soc.dtsi | 62 ++++++++++
> arch/arm/include/asm/device.h | 5 +
> arch/arm/mach-omap2/Kconfig | 11 ++
> arch/arm/mach-omap2/Makefile | 77 ++++++-------
> arch/arm/mach-omap2/board-omap3-dt.c | 93 +++++++++++++++
> arch/arm/mach-omap2/board-omap3beagle.c | 40 ++-----
> arch/arm/mach-omap2/devices.c | 44 ++++----
> arch/arm/mach-omap2/display.c | 6 +-
> arch/arm/mach-omap2/dma.c | 16 ++--
> arch/arm/mach-omap2/gpio.c | 8 +-
> arch/arm/mach-omap2/hsmmc.c | 8 +-
> arch/arm/mach-omap2/hwspinlock.c | 8 +-
> arch/arm/mach-omap2/mcbsp.c | 8 +-
> arch/arm/mach-omap2/pm.c | 8 +-
> arch/arm/mach-omap2/serial.c | 12 +-
> arch/arm/plat-omap/i2c.c | 8 +-
> arch/arm/plat-omap/include/plat/omap_device.h | 17 ++-
> arch/arm/plat-omap/mcbsp.c | 6 +-
> arch/arm/plat-omap/omap_device.c | 150 ++++++++++++++++---------
> drivers/i2c/busses/i2c-omap.c | 23 ++++-
> drivers/of/platform.c | 41 +++++++
> include/linux/of_platform.h | 5 +
> 24 files changed, 469 insertions(+), 216 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap3-soc.dtsi
> create mode 100644 arch/arm/mach-omap2/board-omap3-dt.c
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
next parent reply other threads:[~2011-08-10 5:26 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1312897232-4792-1-git-send-email-manjugk@ti.com>
2011-08-10 5:26 ` Rajendra Nayak [this message]
2011-08-10 5:30 ` [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support G, Manjunath Kondaiah
2011-08-10 5:39 ` Rajendra Nayak
2011-08-10 6:28 ` G, Manjunath Kondaiah
[not found] ` <1312897232-4792-5-git-send-email-manjugk@ti.com>
2011-08-10 7:07 ` [RFC/PATCH 04/14] OMAP: McBSP: use existing macros for converting between devices Jarkko Nikula
2011-08-10 10:15 ` Cousson, Benoit
2011-08-10 16:05 ` G, Manjunath Kondaiah
[not found] ` <1312897232-4792-10-git-send-email-manjugk@ti.com>
2011-08-10 11:51 ` [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt Cousson, Benoit
2011-08-10 16:28 ` G, Manjunath Kondaiah
2011-08-10 17:11 ` Cousson, Benoit
2011-08-10 18:03 ` G, Manjunath Kondaiah
2011-08-10 18:06 ` Cousson, Benoit
2011-08-16 15:02 ` G, Manjunath Kondaiah
[not found] ` <1312897232-4792-11-git-send-email-manjugk@ti.com>
2011-08-10 11:57 ` [RFC/PATCH 10/14] dt: Add pd_size to AUXDATA structure Cousson, Benoit
2011-08-10 13:16 ` Grant Likely
2011-08-10 16:02 ` G, Manjunath Kondaiah
[not found] ` <1312897232-4792-12-git-send-email-manjugk@ti.com>
2011-08-10 12:36 ` [RFC/PATCH 11/14] dt: omap3: add soc file for handling i2c controllers Cousson, Benoit
2011-08-10 16:57 ` G, Manjunath Kondaiah
2011-08-10 17:45 ` Cousson, Benoit
2011-08-16 6:32 ` G, Manjunath Kondaiah
[not found] ` <1312897232-4792-13-git-send-email-manjugk@ti.com>
2011-08-10 12:42 ` [RFC/PATCH 12/14] dt: omap3: beagle board: set clock freq for i2c devices Cousson, Benoit
2011-08-10 16:45 ` G, Manjunath Kondaiah
[not found] ` <1312897232-4792-15-git-send-email-manjugk@ti.com>
2011-08-10 12:57 ` [RFC/PATCH 14/14] dt: omap3: enable dt support for i2c1 controller Cousson, Benoit
2011-08-16 18:44 ` G, Manjunath Kondaiah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E421687.1060409@ti.com \
--to=rnayak@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox