Subject: [PATCH v3 0/4] OMAP serial device tree support

From: [email-masked] (Rob Herring)
Date: Wed, 14 Dec 2011 07:47:54 -0600

On 12/14/2011 05:55 AM, Rajendra Nayak wrote:
> v3 is rebased on top of the latest serial runtime
> patches[1] and boot tested with/without DT on OMAP4
> SDP and OMAP4 Panda boards.
> 
> Patches can be found here..
> git://gitorious.org/omap-pm/linux.git for-dt/serial
> 
> I also had to pull in a fix[2] for DT testing (already in linux-omap
> master) which was missing as the serial runtime branch[1]
> was based on an older master commit.
> 
> Changes in v3:
> -1- Rebased on latest serial runtime patches
> -2- Minor typr fixes
> 
> Changes in v2:
> -1- Got rid of binding to define which uart is console
> -2- Added checks to default clock speed to 48Mhz
> -3- Added compatible for each OMAP family
> -4- Used of_alias_get_id to populate port.line
> 
> [1] git://gitorious.org/runtime_3-0/runtime_3-0.git for_3_3/lo_rc4_uartruntime
> [2] http://www.spinics.net/lists/arm-kernel/msg150751.html
> 
> Rajendra Nayak (4):
>   omap-serial: Get rid of all pdev->id usage
>   omap-serial: Use default clock speed (48Mhz) if not specified
>   omap-serial: Add minimal device tree support
>   ARM: omap: pass minimal SoC/board data for UART from dt
> 
>  .../devicetree/bindings/serial/omap_serial.txt     |   10 +++
>  arch/arm/boot/dts/omap3.dtsi                       |   31 ++++++++
>  arch/arm/boot/dts/omap4.dtsi                       |   28 +++++++
>  arch/arm/mach-omap2/board-generic.c                |    1 -
>  drivers/tty/serial/omap-serial.c                   |   80 +++++++++++++++----
>  5 files changed, 132 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt

Looks good. For the series:

Reviewed-by: Rob Herring <[email-masked]>