Subject: [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT

From: [email-masked] (Cousson, Benoit)
Date: Fri, 6 Jan 2012 17:38:53 +0100

Hi Rob/Grant,

Gentle ping on that series too. This should the last one:-)

Thanks,
Benoit

On 12/23/2011 10:46 AM, Cousson, Benoit wrote:
> Hi Rob,
>
> Are you OK with that update?
>
> Thanks,
> Benoit
>
> On 12/20/2011 2:39 PM, Benoit Cousson wrote:
>> Hi Tony and Rob,
>>
>> Here is the series to take advantage of the new DT interrupt init
>> mechanism.
>> Thanks to Marc's CONFIG_MULTI_IRQ_HANDLER series, OMAP4 just has to
>> use the
>> default GIC binding and does not need some OMAP specific hacks anymore.
>> OMAP2 and 3 are using a simple interrupt controller that can thus expose
>> a simpler binding.
>>
>> This update, compared to v1 [1], is introducing the IRQ domain for the
>> OMAP2&3 INTC by default for both DT and none-DT build.
>> Please note that in the near future that code can even be simplier
>> with the
>> introduction of the domain support inside generic irq chip.
>>
>> This series is based on lo/dt branch to get the needed cleanup and
>> fixes for
>> OMAP.
>>
>> The series is available here for reference:
>> git://gitorious.org/omap-pm/linux.git for_3.3/2_dt_irq
>>
>> Regards,
>> Benoit
>>
>> [1] http://www.spinics.net/lists/linux-omap/msg61152.html
>>
>>
>> Benoit Cousson (5):
>> arm/dts: OMAP4: Update DTS file with new GIC bindings
>> ARM: OMAP2/3: intc: Add irqdomain support
>> ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
>> arm/dts: OMAP3: Add interrupt-controller bindings for INTC
>> ARM: OMAP2+: board-generic: Use of_irq_init API
>>
>> .../devicetree/bindings/arm/omap/intc.txt | 27 +++++++++++
>> arch/arm/boot/dts/omap3.dtsi | 6 ++-
>> arch/arm/boot/dts/omap4.dtsi | 3 +-
>> arch/arm/mach-omap2/board-generic.c | 30 +++++++------
>> arch/arm/mach-omap2/common.h | 10 ++++
>> arch/arm/mach-omap2/irq.c | 48 ++++++++++++++++++--
>> 6 files changed, 103 insertions(+), 21 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/arm/omap/intc.txt
>>
>