Subject: [PATCH v7 1/2] video: support MIPI-DSI controller driver

From: [email-masked] (Donghwa Lee)
Date: Fri, 20 Jan 2012 09:52:00 +0900

2012? 01? 19? 23:38, Archit ? ?:

> Hi,
> 
> On Thursday 19 January 2012 10:58 AM, Donghwa Lee wrote:
>> Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI
>> based LCD Panel could be used with it. This patch supports MIPI-DSI driver
>> based Samsung SoC chip.
>>
>> LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at
>> machine code and LCD panel driver specific function registered to mipi_dsim_ddi
>> structure at lcd panel init function called system init.
>> In the MIPI-DSI driver, find lcd panel driver by using registered
>> lcd panel name, and then initialize lcd panel driver.
>>
>> Changes since v6:
>> 	- remove obscure compile problems.
>> 	- remove useless codes.
>> 	- modify return errno codes properly
> 
> One more comment about 'mipi_dsim.h', it would be better to put it in
> include/video and not 'include/linux'.
> 
> Regards,
> Archit
> 

Yes, I agree with your opinion. But I had missed your nearly opinion yesterday.
If you don't have any other suggestions from this patch set, I hope to re-patch
or fix bugs after merging it.

Thank you,
Donghwa lee

>>
>> Signed-off-by: Donghwa Lee<[email-masked]>
>> Signed-off-by: Inki Dae<[email-masked]>
>> Signed-off-by: Kyungmin Park<[email-masked]>
>> ---
>>   drivers/video/Kconfig                 |    6 +
>>   drivers/video/Makefile                |    2 +
>>   drivers/video/s5p_mipi_dsi.c          |  599 ++++++++++++++++++++++
>>   drivers/video/s5p_mipi_dsi_common.c   |  896 +++++++++++++++++++++++++++++++++
>>   drivers/video/s5p_mipi_dsi_common.h   |   46 ++
>>   drivers/video/s5p_mipi_dsi_lowlevel.c |  617 +++++++++++++++++++++++
>>   drivers/video/s5p_mipi_dsi_lowlevel.h |  112 ++++
>>   drivers/video/s5p_mipi_dsi_regs.h     |  149 ++++++
>>   include/linux/mipi_dsim.h             |  359 +++++++++++++
>>   9 files changed, 2786 insertions(+), 0 deletions(-)
>>   create mode 100644 drivers/video/s5p_mipi_dsi.c
>>   create mode 100644 drivers/video/s5p_mipi_dsi_common.c
>>   create mode 100644 drivers/video/s5p_mipi_dsi_common.h
>>   create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.c
>>   create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.h
>>   create mode 100644 drivers/video/s5p_mipi_dsi_regs.h
>>   create mode 100644 include/linux/mipi_dsim.h
>>
>> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
>> index d83e967..bdc382e 100644
>> --- a/drivers/video/Kconfig
>> +++ b/drivers/video/Kconfig
>> @@ -2082,6 +2082,12 @@ config FB_S3C2410_DEBUG
>>   	  Turn on debugging messages. Note that you can set/unset at run time
>>   	  through sysfs
>>
>> +config S5P_MIPI_DSI
>> +	tristate "Samsung SoC MIPI-DSI support."
>> +	depends on FB_S3C&&  (ARCH_S5PV210 || ARCH_EXYNOS)
>> +	help
>> +	  This enables support for MIPI-DSI device.
>> +
>>   config FB_NUC900
>>           bool "NUC900 LCD framebuffer support"
>>           depends on FB&&  ARCH_W90X900
>> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
>> index 9b9d8ff..29eb7c9 100644
>> --- a/drivers/video/Makefile
>> +++ b/drivers/video/Makefile
>> @@ -120,6 +120,8 @@ obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
>>   obj-$(CONFIG_FB_IMX)              += imxfb.o
>>   obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
>>   obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
>> +obj-$(CONFIG_S5P_MIPI_DSI)	  += s5p_mipi_dsi.o s5p_mipi_dsi_common.o \
>> +				     s5p_mipi_dsi_lowlevel.o
>>   obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
>>   obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
>>   obj-$(CONFIG_FB_PNX4008_DUM)	  += pnx4008/
>> diff --git a/drivers/video/s5p_mipi_dsi.c b/drivers/video/s5p_mipi_dsi.c
>> new file mode 100644
>> index 0000000..5ca6618
>> --- /dev/null
>> +++ b/drivers/video/s5p_mipi_dsi.c
>> @@ -0,0 +1,599 @@
>> +/* linux/drivers/video/s5p_mipi_dsi.c
>> + *
>> + * Samsung SoC MIPI-DSIM driver.
>> + *
>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd
>> + *
>> + * InKi Dae,<[email-masked]>
>> + * Donghwa Lee,<[email-masked]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include<linux/module.h>
>> +#include<linux/kernel.h>
>> +#include<linux/errno.h>
>> +#include<linux/clk.h>
>> +#include<linux/mutex.h>
>> +#include<linux/wait.h>
>> +#include<linux/fs.h>
>> +#include<linux/mm.h>
>> +#include<linux/fb.h>
>> +#include<linux/ctype.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/io.h>
>> +#include<linux/irq.h>
>> +#include<linux/memory.h>
>> +#include<linux/delay.h>
>> +#include<linux/interrupt.h>
>> +#include<linux/kthread.h>
>> +#include<linux/notifier.h>
>> +#include<linux/mipi_dsim.h>
>> +#include<linux/regulator/consumer.h>
>> +#include<linux/pm_runtime.h>
>> +
>> +#include<plat/fb.h>
>> +
>> +#include "s5p_mipi_dsi_common.h"
>> +#include "s5p_mipi_dsi_lowlevel.h"
>> +
>> +struct mipi_dsim_ddi {
>> +	int				bus_id;
>> +	struct list_head		list;
>> +	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
>> +	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
>> +};
>> +
>> +static LIST_HEAD(dsim_ddi_list);
>> +
>> +static DEFINE_MUTEX(mipi_dsim_lock);
>> +
>> +static struct mipi_dsim_platform_data *to_dsim_plat(struct platform_device
>> +							*pdev)
>> +{
>> +	return pdev->dev.platform_data;
>> +}
>> +
>> +static struct regulator_bulk_data supplies[] = {
>> +	{ .supply = "vdd10", },
>> +	{ .supply = "vdd18", },
>> +};
>> +
>> +static int s5p_mipi_regulator_enable(struct mipi_dsim_device *dsim)
>> +{
>> +	int ret;
>> +
>> +	mutex_lock(&dsim->lock);
>> +	ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
>> +	mutex_unlock(&dsim->lock);
>> +
>> +	return ret;
>> +}
>> +
>> +static int s5p_mipi_regulator_disable(struct mipi_dsim_device *dsim)
>> +{
>> +	int ret;
>> +
>> +	mutex_lock(&dsim->lock);
>> +	ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
>> +	mutex_unlock(&dsim->lock);
>> +
>> +	return ret;
>> +}
>> +
>> +/* update all register settings to MIPI DSI controller. */
>> +static void s5p_mipi_update_cfg(struct mipi_dsim_device *dsim)
>> +{
>> +	/*
>> +	 * data from Display controller(FIMD) is not transferred in video mode
>> +	 * but in case of command mode, all settings is not updated to
>> +	 * registers.
>> +	 */
>> +	s5p_mipi_dsi_stand_by(dsim, 0);
>> +
>> +	s5p_mipi_dsi_init_dsim(dsim);
>> +	s5p_mipi_dsi_init_link(dsim);
>> +
>> +	s5p_mipi_dsi_set_hs_enable(dsim);
>> +
>> +	/* set display timing. */
>> +	s5p_mipi_dsi_set_display_mode(dsim, dsim->dsim_config);
>> +
>> +	/*
>> +	 * data from Display controller(FIMD) is transferred in video mode
>> +	 * but in case of command mode, all settigs is updated to registers.
>> +	 */
>> +	s5p_mipi_dsi_stand_by(dsim, 1);
>> +}
>> +
>> +static int s5p_mipi_dsi_early_blank_mode(struct mipi_dsim_device *dsim,
>> +		int power)
>> +{
>> +	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
>> +	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;
>> +
>> +	switch (power) {
>> +	case FB_BLANK_POWERDOWN:
>> +		if (dsim->suspended)
>> +			return 0;
>> +
>> +		if (client_drv&&  client_drv->suspend)
>> +			client_drv->suspend(client_dev);
>> +
>> +		clk_disable(dsim->clock);
>> +
>> +		s5p_mipi_regulator_disable(dsim);
>> +
>> +		dsim->suspended = true;
>> +
>> +		break;
>> +	default:
>> +		break;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int s5p_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power)
>> +{
>> +	struct platform_device *pdev = to_platform_device(dsim->dev);
>> +	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
>> +	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;
>> +
>> +	switch (power) {
>> +	case FB_BLANK_UNBLANK:
>> +		if (!dsim->suspended)
>> +			return 0;
>> +
>> +		/* lcd panel power on. */
>> +		if (client_drv&&  client_drv->power_on)
>> +			client_drv->power_on(client_dev, 1);
>> +
>> +		s5p_mipi_regulator_disable(dsim);
>> +
>> +		/* enable MIPI-DSI PHY. */
>> +		if (dsim->pd->phy_enable)
>> +			dsim->pd->phy_enable(pdev, true);
>> +
>> +		clk_enable(dsim->clock);
>> +
>> +		s5p_mipi_update_cfg(dsim);
>> +
>> +		/* set lcd panel sequence commands. */
>> +		if (client_drv&&  client_drv->set_sequence)
>> +			client_drv->set_sequence(client_dev);
>> +
>> +		dsim->suspended = false;
>> +
>> +		break;
>> +	case FB_BLANK_NORMAL:
>> +		/* TODO. */
>> +		break;
>> +	default:
>> +		break;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +int s5p_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device *lcd_dev)
>> +{
>> +	struct mipi_dsim_ddi *dsim_ddi;
>> +
>> +	if (!lcd_dev->name) {
>> +		pr_err("dsim_lcd_device name is NULL.\n");
>> +		return -EFAULT;
>> +	}
>> +
>> +	dsim_ddi = kzalloc(sizeof(struct mipi_dsim_ddi), GFP_KERNEL);
>> +	if (!dsim_ddi) {
>> +		pr_err("failed to allocate dsim_ddi object.\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	dsim_ddi->dsim_lcd_dev = lcd_dev;
>> +
>> +	mutex_lock(&mipi_dsim_lock);
>> +	list_add_tail(&dsim_ddi->list,&dsim_ddi_list);
>> +	mutex_unlock(&mipi_dsim_lock);
>> +
>> +	return 0;
>> +}
>> +
>> +struct mipi_dsim_ddi *s5p_mipi_dsi_find_lcd_device(struct mipi_dsim_lcd_driver *lcd_drv)
>> +{
>> +	struct mipi_dsim_ddi *dsim_ddi, *next;
>> +	struct mipi_dsim_lcd_device *lcd_dev;
>> +
>> +	mutex_lock(&mipi_dsim_lock);
>> +
>> +	list_for_each_entry_safe(dsim_ddi, next,&dsim_ddi_list, list) {
>> +		if (!dsim_ddi)
>> +			goto out;
>> +
>> +		lcd_dev = dsim_ddi->dsim_lcd_dev;
>> +		if (!lcd_dev)
>> +			continue;
>> +
>> +		if ((strcmp(lcd_drv->name, lcd_dev->name)) == 0) {
>> +			/**
>> +			 * bus_id would be used to identify
>> +			 * connected bus.
>> +			 */
>> +			dsim_ddi->bus_id = lcd_dev->bus_id;
>> +			mutex_unlock(&mipi_dsim_lock);
>> +
>> +			return dsim_ddi;
>> +		}
>> +
>> +		list_del(&dsim_ddi->list);
>> +		kfree(dsim_ddi);
>> +	}
>> +
>> +out:
>> +	mutex_unlock(&mipi_dsim_lock);
>> +
>> +	return NULL;
>> +}
>> +
>> +int s5p_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver *lcd_drv)
>> +{
>> +	struct mipi_dsim_ddi *dsim_ddi;
>> +
>> +	if (!lcd_drv->name) {
>> +		pr_err("dsim_lcd_driver name is NULL.\n");
>> +		return -EFAULT;
>> +	}
>> +
>> +	dsim_ddi = s5p_mipi_dsi_find_lcd_device(lcd_drv);
>> +	if (!dsim_ddi) {
>> +		pr_err("mipi_dsim_ddi object not found.\n");
>> +		return -EFAULT;
>> +	}
>> +
>> +	dsim_ddi->dsim_lcd_drv = lcd_drv;
>> +
>> +	pr_info("registered panel driver(%s) to mipi-dsi driver.\n",
>> +		lcd_drv->name);
>> +
>> +	return 0;
>> +
>> +}
>> +
>> +struct mipi_dsim_ddi *s5p_mipi_dsi_bind_lcd_ddi(struct mipi_dsim_device *dsim,
>> +						const char *name)
>> +{
>> +	struct mipi_dsim_ddi *dsim_ddi, *next;
>> +	struct mipi_dsim_lcd_driver *lcd_drv;
>> +	struct mipi_dsim_lcd_device *lcd_dev;
>> +	int ret;
>> +
>> +	mutex_lock(&dsim->lock);
>> +
>> +	list_for_each_entry_safe(dsim_ddi, next,&dsim_ddi_list, list) {
>> +		lcd_drv = dsim_ddi->dsim_lcd_drv;
>> +		lcd_dev = dsim_ddi->dsim_lcd_dev;
>> +		if (!lcd_drv || !lcd_dev ||
>> +			(dsim->id != dsim_ddi->bus_id))
>> +				continue;
>> +
>> +		dev_dbg(dsim->dev, "lcd_drv->id = %d, lcd_dev->id = %d\n",
>> +				lcd_drv->id, lcd_dev->id);
>> +		dev_dbg(dsim->dev, "lcd_dev->bus_id = %d, dsim->id = %d\n",
>> +				lcd_dev->bus_id, dsim->id);
>> +
>> +		if ((strcmp(lcd_drv->name, name) == 0)) {
>> +			lcd_dev->master = dsim;
>> +
>> +			lcd_dev->dev.parent = dsim->dev;
>> +			dev_set_name(&lcd_dev->dev, "%s", lcd_drv->name);
>> +
>> +			ret = device_register(&lcd_dev->dev);
>> +			if (ret<  0) {
>> +				dev_err(dsim->dev,
>> +					"can't register %s, status %d\n",
>> +					dev_name(&lcd_dev->dev), ret);
>> +				mutex_unlock(&dsim->lock);
>> +
>> +				return NULL;
>> +			}
>> +
>> +			dsim->dsim_lcd_dev = lcd_dev;
>> +			dsim->dsim_lcd_drv = lcd_drv;
>> +
>> +			mutex_unlock(&dsim->lock);
>> +
>> +			return dsim_ddi;
>> +		}
>> +	}
>> +
>> +	mutex_unlock(&dsim->lock);
>> +
>> +	return NULL;
>> +}
>> +
>> +/* define MIPI-DSI Master operations. */
>> +static struct mipi_dsim_master_ops master_ops = {
>> +	.cmd_read			= s5p_mipi_dsi_rd_data,
>> +	.cmd_write			= s5p_mipi_dsi_wr_data,
>> +	.get_dsim_frame_done		= s5p_mipi_dsi_get_frame_done_status,
>> +	.clear_dsim_frame_done		= s5p_mipi_dsi_clear_frame_done,
>> +	.set_early_blank_mode		= s5p_mipi_dsi_early_blank_mode,
>> +	.set_blank_mode			= s5p_mipi_dsi_blank_mode,
>> +};
>> +
>> +static int s5p_mipi_dsi_probe(struct platform_device *pdev)
>> +{
>> +	struct resource *res;
>> +	struct mipi_dsim_device *dsim;
>> +	struct mipi_dsim_config *dsim_config;
>> +	struct mipi_dsim_platform_data *dsim_pd;
>> +	struct mipi_dsim_ddi *dsim_ddi;
>> +	int ret = -EINVAL;
>> +
>> +	dsim = kzalloc(sizeof(struct mipi_dsim_device), GFP_KERNEL);
>> +	if (!dsim) {
>> +		dev_err(&pdev->dev, "failed to allocate dsim object.\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	dsim->pd = to_dsim_plat(pdev);
>> +	dsim->dev =&pdev->dev;
>> +	dsim->id = pdev->id;
>> +
>> +	/* get mipi_dsim_platform_data. */
>> +	dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
>> +	if (dsim_pd == NULL) {
>> +		dev_err(&pdev->dev, "failed to get platform data for dsim.\n");
>> +		goto err_clock_get;
>> +	}
>> +	/* get mipi_dsim_config. */
>> +	dsim_config = dsim_pd->dsim_config;
>> +	if (dsim_config == NULL) {
>> +		dev_err(&pdev->dev, "failed to get dsim config data.\n");
>> +		goto err_clock_get;
>> +	}
>> +
>> +	dsim->dsim_config = dsim_config;
>> +	dsim->master_ops =&master_ops;
>> +
>> +	mutex_init(&dsim->lock);
>> +
>> +	ret = regulator_bulk_get(&pdev->dev, ARRAY_SIZE(supplies), supplies);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Failed to get regulators: %d\n", ret);
>> +		goto err_clock_get;
>> +	}
>> +
>> +	dsim->clock = clk_get(&pdev->dev, "dsim0");
>> +	if (IS_ERR(dsim->clock)) {
>> +		dev_err(&pdev->dev, "failed to get dsim clock source\n");
>> +		goto err_clock_get;
>> +	}
>> +
>> +	clk_enable(dsim->clock);
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	if (!res) {
>> +		dev_err(&pdev->dev, "failed to get io memory region\n");
>> +		goto err_platform_get;
>> +	}
>> +
>> +	dsim->res = request_mem_region(res->start, resource_size(res),
>> +					dev_name(&pdev->dev));
>> +	if (!dsim->res) {
>> +		dev_err(&pdev->dev, "failed to request io memory region\n");
>> +		ret = -ENOMEM;
>> +		goto err_mem_region;
>> +	}
>> +
>> +	dsim->reg_base = ioremap(res->start, resource_size(res));
>> +	if (!dsim->reg_base) {
>> +		dev_err(&pdev->dev, "failed to remap io region\n");
>> +		ret = -ENOMEM;
>> +		goto err_ioremap;
>> +	}
>> +
>> +	mutex_init(&dsim->lock);
>> +
>> +	/* bind lcd ddi matched with panel name. */
>> +	dsim_ddi = s5p_mipi_dsi_bind_lcd_ddi(dsim, dsim_pd->lcd_panel_name);
>> +	if (!dsim_ddi) {
>> +		dev_err(&pdev->dev, "mipi_dsim_ddi object not found.\n");
>> +		goto err_bind;
>> +	}
>> +
>> +	dsim->irq = platform_get_irq(pdev, 0);
>> +	if (dsim->irq<  0) {
>> +		dev_err(&pdev->dev, "failed to request dsim irq resource\n");
>> +		ret = -EINVAL;
>> +		goto err_platform_get_irq;
>> +	}
>> +
>> +	ret = request_irq(dsim->irq, s5p_mipi_dsi_interrupt_handler,
>> +			IRQF_SHARED, pdev->name, dsim);
>> +	if (ret != 0) {
>> +		dev_err(&pdev->dev, "failed to request dsim irq\n");
>> +		ret = -EINVAL;
>> +		goto err_bind;
>> +	}
>> +
>> +	init_completion(&dsim_wr_comp);
>> +	init_completion(&dsim_rd_comp);
>> +
>> +	/* enable interrupt */
>> +	s5p_mipi_dsi_init_interrupt(dsim);
>> +
>> +	/* initialize mipi-dsi client(lcd panel). */
>> +	if (dsim_ddi->dsim_lcd_drv&&  dsim_ddi->dsim_lcd_drv->probe)
>> +		dsim_ddi->dsim_lcd_drv->probe(dsim_ddi->dsim_lcd_dev);
>> +
>> +	/* in case that mipi got enabled at bootloader. */
>> +	if (dsim_pd->enabled)
>> +		goto out;
>> +
>> +	/* lcd panel power on. */
>> +	if (dsim_ddi->dsim_lcd_drv&&  dsim_ddi->dsim_lcd_drv->power_on)
>> +		dsim_ddi->dsim_lcd_drv->power_on(dsim_ddi->dsim_lcd_dev, 1);
>> +
>> +	s5p_mipi_regulator_enable(dsim);
>> +
>> +	/* enable MIPI-DSI PHY. */
>> +	if (dsim->pd->phy_enable)
>> +		dsim->pd->phy_enable(pdev, true);
>> +
>> +	s5p_mipi_update_cfg(dsim);
>> +
>> +	/* set lcd panel sequence commands. */
>> +	if (dsim_ddi->dsim_lcd_drv&&  dsim_ddi->dsim_lcd_drv->set_sequence)
>> +		dsim_ddi->dsim_lcd_drv->set_sequence(dsim_ddi->dsim_lcd_dev);
>> +
>> +	dsim->suspended = false;
>> +
>> +out:
>> +	platform_set_drvdata(pdev, dsim);
>> +
>> +	dev_dbg(&pdev->dev, "mipi-dsi driver(%s mode) has been probed.\n",
>> +		(dsim_config->e_interface == DSIM_COMMAND) ?
>> +			"CPU" : "RGB");
>> +
>> +	return 0;
>> +
>> +err_bind:
>> +	iounmap(dsim->reg_base);
>> +
>> +err_ioremap:
>> +	release_mem_region(dsim->res->start, resource_size(dsim->res));
>> +
>> +err_mem_region:
>> +	release_resource(dsim->res);
>> +
>> +err_platform_get:
>> +	clk_disable(dsim->clock);
>> +	clk_put(dsim->clock);
>> +err_clock_get:
>> +	kfree(dsim);
>> +
>> +err_platform_get_irq:
>> +	return ret;
>> +}
>> +
>> +static int __devexit s5p_mipi_dsi_remove(struct platform_device *pdev)
>> +{
>> +	struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
>> +	struct mipi_dsim_ddi *dsim_ddi, *next;
>> +	struct mipi_dsim_lcd_driver *dsim_lcd_drv;
>> +
>> +	iounmap(dsim->reg_base);
>> +
>> +	clk_disable(dsim->clock);
>> +	clk_put(dsim->clock);
>> +
>> +	release_resource(dsim->res);
>> +	release_mem_region(dsim->res->start, resource_size(dsim->res));
>> +
>> +	list_for_each_entry_safe(dsim_ddi, next,&dsim_ddi_list, list) {
>> +		if (dsim_ddi) {
>> +			if (dsim->id != dsim_ddi->bus_id)
>> +				continue;
>> +
>> +			dsim_lcd_drv = dsim_ddi->dsim_lcd_drv;
>> +
>> +			if (dsim_lcd_drv->remove)
>> +				dsim_lcd_drv->remove(dsim_ddi->dsim_lcd_dev);
>> +
>> +			kfree(dsim_ddi);
>> +		}
>> +	}
>> +
>> +	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
>> +	kfree(dsim);
>> +
>> +	return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int s5p_mipi_dsi_suspend(struct platform_device *pdev,
>> +		pm_message_t state)
>> +{
>> +	struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
>> +	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
>> +	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;
>> +
>> +	disable_irq(dsim->irq);
>> +
>> +	if (dsim->suspended)
>> +		return 0;
>> +
>> +	if (client_drv&&  client_drv->suspend)
>> +		client_drv->suspend(client_dev);
>> +
>> +	/* enable MIPI-DSI PHY. */
>> +	if (dsim->pd->phy_enable)
>> +		dsim->pd->phy_enable(pdev, false);
>> +
>> +	clk_disable(dsim->clock);
>> +
>> +	s5p_mipi_regulator_disable(dsim);
>> +
>> +	dsim->suspended = true;
>> +
>> +	return 0;
>> +}
>> +
>> +static int s5p_mipi_dsi_resume(struct platform_device *pdev)
>> +{
>> +	struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
>> +	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
>> +	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;
>> +
>> +	enable_irq(dsim->irq);
>> +
>> +	if (!dsim->suspended)
>> +		return 0;
>> +
>> +	/* lcd panel power on. */
>> +	if (client_drv&&  client_drv->power_on)
>> +		client_drv->power_on(client_dev, 1);
>> +
>> +	s5p_mipi_regulator_enable(dsim);
>> +
>> +	/* enable MIPI-DSI PHY. */
>> +	if (dsim->pd->phy_enable)
>> +		dsim->pd->phy_enable(pdev, true);
>> +
>> +	clk_enable(dsim->clock);
>> +
>> +	s5p_mipi_update_cfg(dsim);
>> +
>> +	/* set lcd panel sequence commands. */
>> +	if (client_drv&&  client_drv->set_sequence)
>> +		client_drv->set_sequence(client_dev);
>> +
>> +	dsim->suspended = false;
>> +
>> +	return 0;
>> +}
>> +#else
>> +#define s5p_mipi_dsi_suspend NULL
>> +#define s5p_mipi_dsi_resume NULL
>> +#endif
>> +
>> +static struct platform_driver s5p_mipi_dsi_driver = {
>> +	.probe = s5p_mipi_dsi_probe,
>> +	.remove = __devexit_p(s5p_mipi_dsi_remove),
>> +	.suspend = s5p_mipi_dsi_suspend,
>> +	.resume = s5p_mipi_dsi_resume,
>> +	.driver = {
>> +		   .name = "s5p-mipi-dsim",
>> +		   .owner = THIS_MODULE,
>> +	},
>> +};
>> +
>> +module_platform_driver(s5p_mipi_dsi_driver);
>> +
>> +MODULE_AUTHOR("InKi Dae<[email-masked]>");
>> +MODULE_DESCRIPTION("Samusung SoC MIPI-DSI driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/video/s5p_mipi_dsi_common.c b/drivers/video/s5p_mipi_dsi_common.c
>> new file mode 100644
>> index 0000000..3e9537f
>> --- /dev/null
>> +++ b/drivers/video/s5p_mipi_dsi_common.c
>> @@ -0,0 +1,896 @@
>> +/* linux/drivers/video/s5p_mipi_dsi_common.c
>> + *
>> + * Samsung SoC MIPI-DSI common driver.
>> + *
>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd
>> + *
>> + * InKi Dae,<[email-masked]>
>> + * Donghwa Lee,<[email-masked]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include<linux/module.h>
>> +#include<linux/kernel.h>
>> +#include<linux/errno.h>
>> +#include<linux/mutex.h>
>> +#include<linux/wait.h>
>> +#include<linux/fs.h>
>> +#include<linux/mm.h>
>> +#include<linux/fb.h>
>> +#include<linux/ctype.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/io.h>
>> +#include<linux/memory.h>
>> +#include<linux/delay.h>
>> +#include<linux/kthread.h>
>> +#include<linux/mipi_dsim.h>
>> +
>> +#include<video/mipi_display.h>
>> +
>> +#include<mach/map.h>
>> +
>> +#include "s5p_mipi_dsi_regs.h"
>> +#include "s5p_mipi_dsi_lowlevel.h"
>> +#include "s5p_mipi_dsi_common.h"
>> +
>> +#define MIPI_FIFO_TIMEOUT	msecs_to_jiffies(250)
>> +#define MIPI_RX_FIFO_READ_DONE  0x30800002
>> +#define MIPI_MAX_RX_FIFO        20
>> +#define MHZ			(1000 * 1000)
>> +#define FIN_HZ			(24 * MHZ)
>> +
>> +#define DFIN_PLL_MIN_HZ		(6 * MHZ)
>> +#define DFIN_PLL_MAX_HZ		(12 * MHZ)
>> +
>> +#define DFVCO_MIN_HZ		(500 * MHZ)
>> +#define DFVCO_MAX_HZ		(1000 * MHZ)
>> +
>> +#define TRY_GET_FIFO_TIMEOUT	(5000 * 2)
>> +#define TRY_FIFO_CLEAR		(10)
>> +
>> +/* MIPI-DSIM status types. */
>> +enum {
>> +	DSIM_STATE_INIT,	/* should be initialized. */
>> +	DSIM_STATE_STOP,	/* CPU and LCDC are LP mode. */
>> +	DSIM_STATE_HSCLKEN,	/* HS clock was enabled. */
>> +	DSIM_STATE_ULPS
>> +};
>> +
>> +/* define DSI lane types. */
>> +enum {
>> +	DSIM_LANE_CLOCK = (1<<  0),
>> +	DSIM_LANE_DATA0 = (1<<  1),
>> +	DSIM_LANE_DATA1 = (1<<  2),
>> +	DSIM_LANE_DATA2 = (1<<  3),
>> +	DSIM_LANE_DATA3 = (1<<  4)
>> +};
>> +
>> +static unsigned int dpll_table[15] = {
>> +	100, 120, 170, 220, 270,
>> +	320, 390, 450, 510, 560,
>> +	640, 690, 770, 870, 950
>> +};
>> +
>> +irqreturn_t s5p_mipi_dsi_interrupt_handler(int irq, void *dev_id)
>> +{
>> +	unsigned int intsrc = 0;
>> +	unsigned int intmsk = 0;
>> +	struct mipi_dsim_device *dsim = NULL;
>> +
>> +	dsim = dev_id;
>> +	if (!dsim) {
>> +		dev_dbg(dsim->dev, KERN_ERR "%s:error: wrong parameter\n",
>> +							__func__);
>> +		return IRQ_HANDLED;
>> +	}
>> +
>> +	intsrc = s5p_mipi_dsi_read_interrupt(dsim);
>> +	intmsk = s5p_mipi_dsi_read_interrupt_mask(dsim);
>> +
>> +	intmsk = ~(intmsk)&  intsrc;
>> +
>> +	switch (intmsk) {
>> +	case INTMSK_RX_DONE:
>> +		complete(&dsim_rd_comp);
>> +		dev_dbg(dsim->dev, "MIPI INTMSK_RX_DONE\n");
>> +		break;
>> +	case INTMSK_FIFO_EMPTY:
>> +		complete(&dsim_wr_comp);
>> +		dev_dbg(dsim->dev, "MIPI INTMSK_FIFO_EMPTY\n");
>> +		break;
>> +	default:
>> +		break;
>> +	}
>> +
>> +	s5p_mipi_dsi_clear_interrupt(dsim, intmsk);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +/*
>> + * write long packet to mipi dsi slave
>> + * @dsim: mipi dsim device structure.
>> + * @data0: packet data to send.
>> + * @data1: size of packet data
>> + */
>> +static void s5p_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim,
>> +		const unsigned char *data0, unsigned int data_size)
>> +{
>> +	unsigned int data_cnt = 0, payload = 0;
>> +
>> +	/* in case that data count is more then 4 */
>> +	for (data_cnt = 0; data_cnt<  data_size; data_cnt += 4) {
>> +		/*
>> +		 * after sending 4bytes per one time,
>> +		 * send remainder data less then 4.
>> +		 */
>> +		if ((data_size - data_cnt)<  4) {
>> +			if ((data_size - data_cnt) == 3) {
>> +				payload = data0[data_cnt] |
>> +				    data0[data_cnt + 1]<<  8 |
>> +					data0[data_cnt + 2]<<  16;
>> +			dev_dbg(dsim->dev, "count = 3 payload = %x, %x %x %x\n",
>> +				payload, data0[data_cnt],
>> +				data0[data_cnt + 1],
>> +				data0[data_cnt + 2]);
>> +			} else if ((data_size - data_cnt) == 2) {
>> +				payload = data0[data_cnt] |
>> +					data0[data_cnt + 1]<<  8;
>> +			dev_dbg(dsim->dev,
>> +				"count = 2 payload = %x, %x %x\n", payload,
>> +				data0[data_cnt],
>> +				data0[data_cnt + 1]);
>> +			} else if ((data_size - data_cnt) == 1) {
>> +				payload = data0[data_cnt];
>> +			}
>> +
>> +			s5p_mipi_dsi_wr_tx_data(dsim, payload);
>> +		/* send 4bytes per one time. */
>> +		} else {
>> +			payload = data0[data_cnt] |
>> +				data0[data_cnt + 1]<<  8 |
>> +				data0[data_cnt + 2]<<  16 |
>> +				data0[data_cnt + 3]<<  24;
>> +
>> +			dev_dbg(dsim->dev,
>> +				"count = 4 payload = %x, %x %x %x %x\n",
>> +				payload, *(u8 *)(data0 + data_cnt),
>> +				data0[data_cnt + 1],
>> +				data0[data_cnt + 2],
>> +				data0[data_cnt + 3]);
>> +
>> +			s5p_mipi_dsi_wr_tx_data(dsim, payload);
>> +		}
>> +	}
>> +}
>> +
>> +int s5p_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id,
>> +	const unsigned char *data0, unsigned int data_size)
>> +{
>> +	unsigned int check_rx_ack = 0;
>> +
>> +	if (dsim->state == DSIM_STATE_ULPS) {
>> +		dev_err(dsim->dev, "state is ULPS.\n");
>> +
>> +		return -EINVAL;
>> +	}
>> +
>> +	/* FIXME!!! why does it need this delay? */
>> +	msleep(20);
>> +
>> +	mutex_lock(&dsim->lock);
>> +
>> +	switch (data_id) {
>> +	/* short packet types of packet types for command. */
>> +	case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
>> +	case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
>> +	case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
>> +	case MIPI_DSI_DCS_SHORT_WRITE:
>> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
>> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
>> +		s5p_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]);
>> +		if (check_rx_ack) {
>> +			/* process response func should be implemented */
>> +			mutex_unlock(&dsim->lock);
>> +			return 0;
>> +		} else {
>> +			mutex_unlock(&dsim->lock);
>> +			return -EINVAL;
>> +		}
>> +
>> +	/* general command */
>> +	case MIPI_DSI_COLOR_MODE_OFF:
>> +	case MIPI_DSI_COLOR_MODE_ON:
>> +	case MIPI_DSI_SHUTDOWN_PERIPHERAL:
>> +	case MIPI_DSI_TURN_ON_PERIPHERAL:
>> +		s5p_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]);
>> +		if (check_rx_ack) {
>> +			/* process response func should be implemented. */
>> +			mutex_unlock(&dsim->lock);
>> +			return 0;
>> +		} else {
>> +			mutex_unlock(&dsim->lock);
>> +			return -EINVAL;
>> +		}
>> +
>> +	/* packet types for video data */
>> +	case MIPI_DSI_V_SYNC_START:
>> +	case MIPI_DSI_V_SYNC_END:
>> +	case MIPI_DSI_H_SYNC_START:
>> +	case MIPI_DSI_H_SYNC_END:
>> +	case MIPI_DSI_END_OF_TRANSMISSION:
>> +		mutex_unlock(&dsim->lock);
>> +		return 0;
>> +
>> +	/* long packet type and null packet */
>> +	case MIPI_DSI_NULL_PACKET:
>> +	case MIPI_DSI_BLANKING_PACKET:
>> +		mutex_unlock(&dsim->lock);
>> +		return 0;
>> +	case MIPI_DSI_GENERIC_LONG_WRITE:
>> +	case MIPI_DSI_DCS_LONG_WRITE:
>> +	{
>> +		unsigned int size, payload = 0;
>> +		INIT_COMPLETION(dsim_wr_comp);
>> +
>> +		size = data_size * 4;
>> +
>> +		/* if data count is less then 4, then send 3bytes data.  */
>> +		if (data_size<  4) {
>> +			payload = data0[0] |
>> +				data0[1]<<  8 |
>> +				data0[2]<<  16;
>> +
>> +			s5p_mipi_dsi_wr_tx_data(dsim, payload);
>> +
>> +			dev_dbg(dsim->dev, "count = %d payload = %x,%x %x %x\n",
>> +				data_size, payload, data0[0],
>> +				data0[1], data0[2]);
>> +
>> +		/* in case that data count is more then 4 */
>> +		} else
>> +			s5p_mipi_dsi_long_data_wr(dsim, data0, data_size);
>> +
>> +		/* put data into header fifo */
>> +		s5p_mipi_dsi_wr_tx_header(dsim, data_id, data_size&  0xff,
>> +			(data_size&  0xff00)>>  8);
>> +
>> +		if (!wait_for_completion_interruptible_timeout(&dsim_wr_comp,
>> +							MIPI_FIFO_TIMEOUT)) {
>> +			dev_warn(dsim->dev, "command write timeout.\n");
>> +			mutex_unlock(&dsim->lock);
>> +			return -EAGAIN;
>> +		}
>> +
>> +		if (check_rx_ack) {
>> +			/* process response func should be implemented. */
>> +			mutex_unlock(&dsim->lock);
>> +			return 0;
>> +		} else {
>> +			mutex_unlock(&dsim->lock);
>> +			return -EINVAL;
>> +		}
>> +	}
>> +
>> +	/* packet typo for video data */
>> +	case MIPI_DSI_PACKED_PIXEL_STREAM_16:
>> +	case MIPI_DSI_PACKED_PIXEL_STREAM_18:
>> +	case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
>> +	case MIPI_DSI_PACKED_PIXEL_STREAM_24:
>> +		if (check_rx_ack) {
>> +			/* process response func should be implemented. */
>> +			mutex_unlock(&dsim->lock);
>> +			return 0;
>> +		} else {
>> +			mutex_unlock(&dsim->lock);
>> +			return -EINVAL;
>> +		}
>> +	default:
>> +		dev_warn(dsim->dev,
>> +			"data id %x is not supported current DSI spec.\n",
>> +			data_id);
>> +
>> +		mutex_unlock(&dsim->lock);
>> +		return -EINVAL;
>> +	}
>> +
>> +	mutex_unlock(&dsim->lock);
>> +	return 0;
>> +}
>> +
>> +static unsigned int s5p_mipi_dsi_long_data_rd(struct mipi_dsim_device *dsim,
>> +		unsigned int req_size, unsigned int rx_data, u8 *rx_buf)
>> +{
>> +	unsigned int rcv_pkt, i, j;
>> +	u16 rxsize;
>> +
>> +	/* for long packet */
>> +	rxsize = (u16)((rx_data&  0x00ffff00)>>  8);
>> +	dev_dbg(dsim->dev, "mipi dsi rx size : %d\n", rxsize);
>> +	if (rxsize != req_size) {
>> +		dev_dbg(dsim->dev,
>> +			"received size mismatch received: %d, requested: %d\n",
>> +			rxsize, req_size);
>> +		goto err;
>> +	}
>> +
>> +	for (i = 0; i<  (rxsize>>  2); i++) {
>> +		rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
>> +		dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt);
>> +		for (j = 0; j<  4; j++) {
>> +			rx_buf[(i * 4) + j] =
>> +					(u8)(rcv_pkt>>  (j * 8))&  0xff;
>> +			dev_dbg(dsim->dev, "received value : %02x\n",
>> +					(rcv_pkt>>  (j * 8))&  0xff);
>> +		}
>> +	}
>> +	if (rxsize % 4) {
>> +		rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
>> +		dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt);
>> +		for (j = 0; j<  (rxsize % 4); j++) {
>> +			rx_buf[(i * 4) + j] =
>> +					(u8)(rcv_pkt>>  (j * 8))&  0xff;
>> +			dev_dbg(dsim->dev, "received value : %02x\n",
>> +					(rcv_pkt>>  (j * 8))&  0xff);
>> +		}
>> +	}
>> +
>> +	return rxsize;
>> +
>> +err:
>> +	return -EINVAL;
>> +}
>> +
>> +static unsigned int s5p_mipi_dsi_response_size(unsigned int req_size)
>> +{
>> +	switch (req_size) {
>> +	case 1:
>> +		return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE;
>> +	case 2:
>> +		return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE;
>> +	default:
>> +		return MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE;
>> +	}
>> +}
>> +
>> +int s5p_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
>> +	unsigned int data0, unsigned int req_size, u8 *rx_buf)
>> +{
>> +	unsigned int rx_data, rcv_pkt, i;
>> +	u8 response = 0;
>> +	u16 rxsize;
>> +
>> +	if (dsim->state == DSIM_STATE_ULPS) {
>> +		dev_err(dsim->dev, "state is ULPS.\n");
>> +
>> +		return -EINVAL;
>> +	}
>> +
>> +	/* FIXME!!! */
>> +	msleep(20);
>> +
>> +	mutex_lock(&dsim->lock);
>> +	INIT_COMPLETION(dsim_rd_comp);
>> +	s5p_mipi_dsi_rd_tx_header(dsim,
>> +		MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, req_size);
>> +
>> +	response = s5p_mipi_dsi_response_size(req_size);
>> +
>> +	switch (data_id) {
>> +	case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
>> +	case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
>> +	case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
>> +	case MIPI_DSI_DCS_READ:
>> +		s5p_mipi_dsi_rd_tx_header(dsim,
>> +			data_id, data0);
>> +		/* process response func should be implemented. */
>> +		break;
>> +	default:
>> +		dev_warn(dsim->dev,
>> +			"data id %x is not supported current DSI spec.\n",
>> +			data_id);
>> +
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (!wait_for_completion_interruptible_timeout(&dsim_rd_comp,
>> +				MIPI_FIFO_TIMEOUT)) {
>> +		pr_err("RX done interrupt timeout\n");
>> +		mutex_unlock(&dsim->lock);
>> +		return 0;
>> +	}
>> +
>> +	msleep(20);
>> +
>> +	rx_data = s5p_mipi_dsi_rd_rx_fifo(dsim);
>> +
>> +	if ((u8)(rx_data&  0xff) != response) {
>> +		printk(KERN_ERR
>> +			"mipi dsi wrong response rx_data : %x, response:%x\n",
>> +			rx_data, response);
>> +		goto clear_rx_fifo;
>> +	}
>> +
>> +	if (req_size<= 2) {
>> +		/* for short packet */
>> +		for (i = 0; i<  req_size; i++)
>> +			rx_buf[i] = (rx_data>>  (8 + (i * 8)))&  0xff;
>> +		rxsize = req_size;
>> +	} else {
>> +		/* for long packet */
>> +		rxsize = s5p_mipi_dsi_long_data_rd(dsim, req_size, rx_data,
>> +							rx_buf);
>> +		if (rxsize != req_size)
>> +			goto clear_rx_fifo;
>> +	}
>> +
>> +	rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
>> +
>> +	msleep(20);
>> +
>> +	if (rcv_pkt != MIPI_RX_FIFO_READ_DONE) {
>> +		dev_info(dsim->dev,
>> +			"Can't found RX FIFO READ DONE FLAG : %x\n", rcv_pkt);
>> +		goto clear_rx_fifo;
>> +	}
>> +
>> +	mutex_unlock(&dsim->lock);
>> +
>> +	return rxsize;
>> +
>> +clear_rx_fifo:
>> +	i = 0;
>> +	while (1) {
>> +		rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
>> +		if ((rcv_pkt == MIPI_RX_FIFO_READ_DONE)
>> +				|| (i>  MIPI_MAX_RX_FIFO))
>> +			break;
>> +		dev_dbg(dsim->dev,
>> +				"mipi dsi clear rx fifo : %08x\n", rcv_pkt);
>> +		i++;
>> +	}
>> +	dev_info(dsim->dev,
>> +		"mipi dsi rx done count : %d, rcv_pkt : %08x\n", i, rcv_pkt);
>> +
>> +	mutex_unlock(&dsim->lock);
>> +
>> +	return 0;
>> +}
>> +
>> +static int s5p_mipi_dsi_pll_on(struct mipi_dsim_device *dsim,
>> +				unsigned int enable)
>> +{
>> +	int sw_timeout;
>> +
>> +	if (enable) {
>> +		sw_timeout = 1000;
>> +
>> +		s5p_mipi_dsi_enable_pll(dsim, 1);
>> +		while (1) {
>> +			sw_timeout--;
>> +			if (s5p_mipi_dsi_is_pll_stable(dsim))
>> +				return 0;
>> +			if (sw_timeout == 0)
>> +				return -EINVAL;
>> +		}
>> +	} else
>> +		s5p_mipi_dsi_enable_pll(dsim, 0);
>> +
>> +	return 0;
>> +}
>> +
>> +static unsigned long s5p_mipi_dsi_change_pll(struct mipi_dsim_device *dsim,
>> +	unsigned int pre_divider, unsigned int main_divider,
>> +	unsigned int scaler)
>> +{
>> +	unsigned long dfin_pll, dfvco, dpll_out;
>> +	unsigned int i, freq_band = 0xf;
>> +
>> +	dfin_pll = (FIN_HZ / pre_divider);
>> +
>> +	/******************************************************
>> +	 *	Serial Clock(=ByteClk X 8)	FreqBand[3:0] *
>> +	 ******************************************************
>> +	 *	~ 99.99 MHz			0000
>> +	 *	100 ~ 119.99 MHz		0001
>> +	 *	120 ~ 159.99 MHz		0010
>> +	 *	160 ~ 199.99 MHz		0011
>> +	 *	200 ~ 239.99 MHz		0100
>> +	 *	140 ~ 319.99 MHz		0101
>> +	 *	320 ~ 389.99 MHz		0110
>> +	 *	390 ~ 449.99 MHz		0111
>> +	 *	450 ~ 509.99 MHz		1000
>> +	 *	510 ~ 559.99 MHz		1001
>> +	 *	560 ~ 639.99 MHz		1010
>> +	 *	640 ~ 689.99 MHz		1011
>> +	 *	690 ~ 769.99 MHz		1100
>> +	 *	770 ~ 869.99 MHz		1101
>> +	 *	870 ~ 949.99 MHz		1110
>> +	 *	950 ~ 1000 MHz			1111
>> +	 ******************************************************/
>> +	if (dfin_pll<  DFIN_PLL_MIN_HZ || dfin_pll>  DFIN_PLL_MAX_HZ) {
>> +		dev_warn(dsim->dev, "fin_pll range should be 6MHz ~ 12MHz\n");
>> +		s5p_mipi_dsi_enable_afc(dsim, 0, 0);
>> +	} else {
>> +		if (dfin_pll<  7 * MHZ)
>> +			s5p_mipi_dsi_enable_afc(dsim, 1, 0x1);
>> +		else if (dfin_pll<  8 * MHZ)
>> +			s5p_mipi_dsi_enable_afc(dsim, 1, 0x0);
>> +		else if (dfin_pll<  9 * MHZ)
>> +			s5p_mipi_dsi_enable_afc(dsim, 1, 0x3);
>> +		else if (dfin_pll<  10 * MHZ)
>> +			s5p_mipi_dsi_enable_afc(dsim, 1, 0x2);
>> +		else if (dfin_pll<  11 * MHZ)
>> +			s5p_mipi_dsi_enable_afc(dsim, 1, 0x5);
>> +		else
>> +			s5p_mipi_dsi_enable_afc(dsim, 1, 0x4);
>> +	}
>> +
>> +	dfvco = dfin_pll * main_divider;
>> +	dev_dbg(dsim->dev, "dfvco = %lu, dfin_pll = %lu, main_divider = %d\n",
>> +				dfvco, dfin_pll, main_divider);
>> +	if (dfvco<  DFVCO_MIN_HZ || dfvco>  DFVCO_MAX_HZ)
>> +		dev_warn(dsim->dev, "fvco range should be 500MHz ~ 1000MHz\n");
>> +
>> +	dpll_out = dfvco / (1<<  scaler);
>> +	dev_dbg(dsim->dev, "dpll_out = %lu, dfvco = %lu, scaler = %d\n",
>> +		dpll_out, dfvco, scaler);
>> +
>> +	for (i = 0; i<  ARRAY_SIZE(dpll_table); i++) {
>> +		if (dpll_out<  dpll_table[i] * MHZ) {
>> +			freq_band = i;
>> +			break;
>> +		}
>> +	}
>> +
>> +	dev_dbg(dsim->dev, "freq_band = %d\n", freq_band);
>> +
>> +	s5p_mipi_dsi_pll_freq(dsim, pre_divider, main_divider, scaler);
>> +
>> +	s5p_mipi_dsi_hs_zero_ctrl(dsim, 0);
>> +	s5p_mipi_dsi_prep_ctrl(dsim, 0);
>> +
>> +	/* Freq Band */
>> +	s5p_mipi_dsi_pll_freq_band(dsim, freq_band);
>> +
>> +	/* Stable time */
>> +	s5p_mipi_dsi_pll_stable_time(dsim, dsim->dsim_config->pll_stable_time);
>> +
>> +	/* Enable PLL */
>> +	dev_dbg(dsim->dev, "FOUT of mipi dphy pll is %luMHz\n",
>> +		(dpll_out / MHZ));
>> +
>> +	return dpll_out;
>> +}
>> +
>> +static int s5p_mipi_dsi_set_clock(struct mipi_dsim_device *dsim,
>> +	unsigned int byte_clk_sel, unsigned int enable)
>> +{
>> +	unsigned int esc_div;
>> +	unsigned long esc_clk_error_rate;
>> +	unsigned long hs_clk = 0, byte_clk = 0, escape_clk = 0;
>> +
>> +	if (enable) {
>> +		dsim->e_clk_src = byte_clk_sel;
>> +
>> +		/* Escape mode clock and byte clock source */
>> +		s5p_mipi_dsi_set_byte_clock_src(dsim, byte_clk_sel);
>> +
>> +		/* DPHY, DSIM Link : D-PHY clock out */
>> +		if (byte_clk_sel == DSIM_PLL_OUT_DIV8) {
>> +			hs_clk = s5p_mipi_dsi_change_pll(dsim,
>> +				dsim->dsim_config->p, dsim->dsim_config->m,
>> +				dsim->dsim_config->s);
>> +			if (hs_clk == 0) {
>> +				dev_err(dsim->dev,
>> +					"failed to get hs clock.\n");
>> +				return -EINVAL;
>> +			}
>> +
>> +			byte_clk = hs_clk / 8;
>> +			s5p_mipi_dsi_enable_pll_bypass(dsim, 0);
>> +			s5p_mipi_dsi_pll_on(dsim, 1);
>> +		/* DPHY : D-PHY clock out, DSIM link : external clock out */
>> +		} else if (byte_clk_sel == DSIM_EXT_CLK_DIV8) {
>> +			dev_warn(dsim->dev, "this project is not support\n");
>> +			dev_warn(dsim->dev,
>> +				"external clock source for MIPI DSIM.\n");
>> +		} else if (byte_clk_sel == DSIM_EXT_CLK_BYPASS) {
>> +			dev_warn(dsim->dev, "this project is not support\n");
>> +			dev_warn(dsim->dev,
>> +				"external clock source for MIPI DSIM\n");
>> +		}
>> +
>> +		/* escape clock divider */
>> +		esc_div = byte_clk / (dsim->dsim_config->esc_clk);
>> +		dev_dbg(dsim->dev,
>> +			"esc_div = %d, byte_clk = %lu, esc_clk = %lu\n",
>> +			esc_div, byte_clk, dsim->dsim_config->esc_clk);
>> +		if ((byte_clk / esc_div)>= (20 * MHZ) ||
>> +				(byte_clk / esc_div)>
>> +					dsim->dsim_config->esc_clk)
>> +			esc_div += 1;
>> +
>> +		escape_clk = byte_clk / esc_div;
>> +		dev_dbg(dsim->dev,
>> +			"escape_clk = %lu, byte_clk = %lu, esc_div = %d\n",
>> +			escape_clk, byte_clk, esc_div);
>> +
>> +		/* enable escape clock. */
>> +		s5p_mipi_dsi_enable_byte_clock(dsim, 1);
>> +
>> +		/* enable byte clk and escape clock */
>> +		s5p_mipi_dsi_set_esc_clk_prs(dsim, 1, esc_div);
>> +		/* escape clock on lane */
>> +		s5p_mipi_dsi_enable_esc_clk_on_lane(dsim,
>> +			(DSIM_LANE_CLOCK | dsim->data_lane), 1);
>> +
>> +		dev_dbg(dsim->dev, "byte clock is %luMHz\n",
>> +			(byte_clk / MHZ));
>> +		dev_dbg(dsim->dev, "escape clock that user's need is %lu\n",
>> +			(dsim->dsim_config->esc_clk / MHZ));
>> +		dev_dbg(dsim->dev, "escape clock divider is %x\n", esc_div);
>> +		dev_dbg(dsim->dev, "escape clock is %luMHz\n",
>> +			((byte_clk / esc_div) / MHZ));
>> +
>> +		if ((byte_clk / esc_div)>  escape_clk) {
>> +			esc_clk_error_rate = escape_clk /
>> +				(byte_clk / esc_div);
>> +			dev_warn(dsim->dev, "error rate is %lu over.\n",
>> +				(esc_clk_error_rate / 100));
>> +		} else if ((byte_clk / esc_div)<  (escape_clk)) {
>> +			esc_clk_error_rate = (byte_clk / esc_div) /
>> +				escape_clk;
>> +			dev_warn(dsim->dev, "error rate is %lu under.\n",
>> +				(esc_clk_error_rate / 100));
>> +		}
>> +	} else {
>> +		s5p_mipi_dsi_enable_esc_clk_on_lane(dsim,
>> +			(DSIM_LANE_CLOCK | dsim->data_lane), 0);
>> +		s5p_mipi_dsi_set_esc_clk_prs(dsim, 0, 0);
>> +
>> +		/* disable escape clock. */
>> +		s5p_mipi_dsi_enable_byte_clock(dsim, 0);
>> +
>> +		if (byte_clk_sel == DSIM_PLL_OUT_DIV8)
>> +			s5p_mipi_dsi_pll_on(dsim, 0);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +int s5p_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim)
>> +{
>> +	dsim->state = DSIM_STATE_INIT;
>> +
>> +	switch (dsim->dsim_config->e_no_data_lane) {
>> +	case DSIM_DATA_LANE_1:
>> +		dsim->data_lane = DSIM_LANE_DATA0;
>> +		break;
>> +	case DSIM_DATA_LANE_2:
>> +		dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1;
>> +		break;
>> +	case DSIM_DATA_LANE_3:
>> +		dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
>> +			DSIM_LANE_DATA2;
>> +		break;
>> +	case DSIM_DATA_LANE_4:
>> +		dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
>> +			DSIM_LANE_DATA2 | DSIM_LANE_DATA3;
>> +		break;
>> +	default:
>> +		dev_info(dsim->dev, "data lane is invalid.\n");
>> +		return -EINVAL;
>> +	};
>> +
>> +	s5p_mipi_dsi_sw_reset(dsim);
>> +	s5p_mipi_dsi_func_reset(dsim);
>> +
>> +	s5p_mipi_dsi_dp_dn_swap(dsim, 0);
>> +
>> +	return 0;
>> +}
>> +
>> +void s5p_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int src = 0;
>> +
>> +	src = (INTSRC_SFR_FIFO_EMPTY | INTSRC_RX_DATA_DONE);
>> +	s5p_mipi_dsi_set_interrupt(dsim, src, 1);
>> +
>> +	src = 0;
>> +	src = ~(INTMSK_RX_DONE | INTMSK_FIFO_EMPTY);
>> +	s5p_mipi_dsi_set_interrupt_mask(dsim, src, 1);
>> +}
>> +
>> +int s5p_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim,
>> +	unsigned int enable)
>> +{
>> +	/* enable only frame done interrupt */
>> +	s5p_mipi_dsi_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable);
>> +
>> +	return 0;
>> +}
>> +
>> +void s5p_mipi_dsi_stand_by(struct mipi_dsim_device *dsim,
>> +		unsigned int enable)
>> +{
>> +
>> +	/* consider Main display and Sub display. */
>> +
>> +	s5p_mipi_dsi_set_main_stand_by(dsim, enable);
>> +}
>> +
>> +int s5p_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim,
>> +	struct mipi_dsim_config *dsim_config)
>> +{
>> +	struct mipi_dsim_platform_data *dsim_pd;
>> +	struct fb_videomode *timing;
>> +
>> +	dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
>> +	timing = (struct fb_videomode *)dsim_pd->lcd_panel_info;
>> +
>> +	/* in case of VIDEO MODE (RGB INTERFACE), it sets polarities. */
>> +	if (dsim_config->e_interface == (u32) DSIM_VIDEO) {
>> +		if (dsim_config->auto_vertical_cnt == 0) {
>> +			s5p_mipi_dsi_set_main_disp_vporch(dsim,
>> +				dsim_config->cmd_allow,
>> +				timing->upper_margin,
>> +				timing->lower_margin);
>> +			s5p_mipi_dsi_set_main_disp_hporch(dsim,
>> +				timing->left_margin,
>> +				timing->right_margin);
>> +			s5p_mipi_dsi_set_main_disp_sync_area(dsim,
>> +				timing->vsync_len,
>> +				timing->hsync_len);
>> +		}
>> +	}
>> +
>> +	s5p_mipi_dsi_set_main_disp_resol(dsim, timing->xres,
>> +			timing->yres);
>> +
>> +	s5p_mipi_dsi_display_config(dsim, dsim_config);
>> +
>> +	dev_info(dsim->dev, "lcd panel ==>  width = %d, height = %d\n",
>> +			timing->xres, timing->yres);
>> +
>> +	return 0;
>> +}
>> +
>> +int s5p_mipi_dsi_init_link(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int time_out = 100;
>> +
>> +	switch (dsim->state) {
>> +	case DSIM_STATE_INIT:
>> +		s5p_mipi_dsi_init_fifo_pointer(dsim, 0x1f);
>> +
>> +		/* dsi configuration */
>> +		s5p_mipi_dsi_init_config(dsim);
>> +		s5p_mipi_dsi_enable_lane(dsim, DSIM_LANE_CLOCK, 1);
>> +		s5p_mipi_dsi_enable_lane(dsim, dsim->data_lane, 1);
>> +
>> +		/* set clock configuration */
>> +		s5p_mipi_dsi_set_clock(dsim, dsim->dsim_config->e_byte_clk, 1);
>> +
>> +		/* check clock and data lane state are stop state */
>> +		while (!(s5p_mipi_dsi_is_lane_state(dsim))) {
>> +			time_out--;
>> +			if (time_out == 0) {
>> +				dev_err(dsim->dev,
>> +					"DSI Master is not stop state.\n");
>> +				dev_err(dsim->dev,
>> +					"Check initialization process\n");
>> +
>> +				return -EINVAL;
>> +			}
>> +		}
>> +		if (time_out != 0) {
>> +			dev_info(dsim->dev,
>> +				"DSI Master driver has been completed.\n");
>> +			dev_info(dsim->dev, "DSI Master state is stop state\n");
>> +		}
>> +
>> +		dsim->state = DSIM_STATE_STOP;
>> +
>> +		/* BTA sequence counters */
>> +		s5p_mipi_dsi_set_stop_state_counter(dsim,
>> +			dsim->dsim_config->stop_holding_cnt);
>> +		s5p_mipi_dsi_set_bta_timeout(dsim,
>> +			dsim->dsim_config->bta_timeout);
>> +		s5p_mipi_dsi_set_lpdr_timeout(dsim,
>> +			dsim->dsim_config->rx_timeout);
>> +
>> +		return 0;
>> +	default:
>> +		dev_info(dsim->dev, "DSI Master is already init.\n");
>> +		return 0;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +int s5p_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim)
>> +{
>> +	if (dsim->state != DSIM_STATE_STOP) {
>> +		dev_warn(dsim->dev, "DSIM is not in stop state.\n");
>> +		return 0;
>> +	}
>> +
>> +	if (dsim->e_clk_src == DSIM_EXT_CLK_BYPASS) {
>> +		dev_warn(dsim->dev, "clock source is external bypass.\n");
>> +		return 0;
>> +	}
>> +
>> +	dsim->state = DSIM_STATE_HSCLKEN;
>> +
>> +	 /* set LCDC and CPU transfer mode to HS. */
>> +	s5p_mipi_dsi_set_lcdc_transfer_mode(dsim, 0);
>> +	s5p_mipi_dsi_set_cpu_transfer_mode(dsim, 0);
>> +	s5p_mipi_dsi_enable_hs_clock(dsim, 1);
>> +
>> +	return 0;
>> +}
>> +
>> +int s5p_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim,
>> +		unsigned int mode)
>> +{
>> +	if (mode) {
>> +		if (dsim->state != DSIM_STATE_HSCLKEN) {
>> +			dev_err(dsim->dev, "HS Clock lane is not enabled.\n");
>> +			return -EINVAL;
>> +		}
>> +
>> +		s5p_mipi_dsi_set_lcdc_transfer_mode(dsim, 0);
>> +	} else {
>> +		if (dsim->state == DSIM_STATE_INIT || dsim->state ==
>> +			DSIM_STATE_ULPS) {
>> +			dev_err(dsim->dev,
>> +				"DSI Master is not STOP or HSDT state.\n");
>> +			return -EINVAL;
>> +		}
>> +
>> +		s5p_mipi_dsi_set_cpu_transfer_mode(dsim, 0);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +int s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim)
>> +{
>> +	return _s5p_mipi_dsi_get_frame_done_status(dsim);
>> +}
>> +
>> +int s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim)
>> +{
>> +	_s5p_mipi_dsi_clear_frame_done(dsim);
>> +
>> +	return 0;
>> +}
>> +
>> +int s5p_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
>> +				unsigned int val)
>> +{
>> +	int try = TRY_FIFO_CLEAR;
>> +
>> +	s5p_mipi_dsi_sw_reset_release(dsim);
>> +	s5p_mipi_dsi_func_reset(dsim);
>> +
>> +	do {
>> +		if (s5p_mipi_dsi_get_sw_reset_release(dsim)) {
>> +			s5p_mipi_dsi_init_interrupt(dsim);
>> +			dev_dbg(dsim->dev, "reset release done.\n");
>> +			return 0;
>> +		}
>> +	} while (--try);
>> +
>> +	dev_err(dsim->dev, "failed to clear dsim fifo.\n");
>> +	return -EAGAIN;
>> +}
>> +
>> +MODULE_AUTHOR("InKi Dae<[email-masked]>");
>> +MODULE_DESCRIPTION("Samusung SoC MIPI-DSI common driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/video/s5p_mipi_dsi_common.h b/drivers/video/s5p_mipi_dsi_common.h
>> new file mode 100644
>> index 0000000..475a399
>> --- /dev/null
>> +++ b/drivers/video/s5p_mipi_dsi_common.h
>> @@ -0,0 +1,46 @@
>> +/* linux/drivers/video/s5p_mipi_dsi_common.h
>> + *
>> + * Header file for Samsung SoC MIPI-DSI common driver.
>> + *
>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd
>> + *
>> + * InKi Dae<[email-masked]>
>> + * Donghwa Lee<[email-masked]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#ifndef _S5P_MIPI_DSI_COMMON_H
>> +#define _S5P_MIPI_DSI_COMMON_H
>> +
>> +static DECLARE_COMPLETION(dsim_rd_comp);
>> +static DECLARE_COMPLETION(dsim_wr_comp);
>> +
>> +int s5p_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id,
>> +	const unsigned char *data0, unsigned int data_size);
>> +int s5p_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
>> +	unsigned int data0, unsigned int req_size, u8 *rx_buf);
>> +irqreturn_t s5p_mipi_dsi_interrupt_handler(int irq, void *dev_id);
>> +void s5p_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim);
>> +int s5p_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim);
>> +void s5p_mipi_dsi_stand_by(struct mipi_dsim_device *dsim,
>> +		unsigned int enable);
>> +int s5p_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim,
>> +			struct mipi_dsim_config *dsim_info);
>> +int s5p_mipi_dsi_init_link(struct mipi_dsim_device *dsim);
>> +int s5p_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim);
>> +int s5p_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim,
>> +		unsigned int mode);
>> +int s5p_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim,
>> +	unsigned int enable);
>> +int s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim);
>> +int s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim);
>> +
>> +extern struct fb_info *registered_fb[FB_MAX] __read_mostly;
>> +
>> +int s5p_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
>> +				unsigned int val);
>> +
>> +#endif /* _S5P_MIPI_DSI_COMMON_H */
>> diff --git a/drivers/video/s5p_mipi_dsi_lowlevel.c b/drivers/video/s5p_mipi_dsi_lowlevel.c
>> new file mode 100644
>> index 0000000..a4a21d0
>> --- /dev/null
>> +++ b/drivers/video/s5p_mipi_dsi_lowlevel.c
>> @@ -0,0 +1,617 @@
>> +/* linux/drivers/video/s5p_mipi_dsi_lowlevel.c
>> + *
>> + * Samsung SoC MIPI-DSI lowlevel driver.
>> + *
>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd
>> + *
>> + * InKi Dae,<[email-masked]>
>> + * Donghwa Lee,<[email-masked]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include<linux/module.h>
>> +#include<linux/kernel.h>
>> +#include<linux/errno.h>
>> +#include<linux/mutex.h>
>> +#include<linux/wait.h>
>> +#include<linux/delay.h>
>> +#include<linux/fs.h>
>> +#include<linux/mm.h>
>> +#include<linux/ctype.h>
>> +#include<linux/io.h>
>> +#include<linux/mipi_dsim.h>
>> +
>> +#include<mach/map.h>
>> +
>> +#include "s5p_mipi_dsi_regs.h"
>> +
>> +void s5p_mipi_dsi_func_reset(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = readl(dsim->reg_base + S5P_DSIM_SWRST);
>> +
>> +	reg |= DSIM_FUNCRST;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_SWRST);
>> +}
>> +
>> +void s5p_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = readl(dsim->reg_base + S5P_DSIM_SWRST);
>> +
>> +	reg |= DSIM_SWRST;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_SWRST);
>> +}
>> +
>> +void s5p_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
>> +
>> +	reg |= INTSRC_SW_RST_RELEASE;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
>> +}
>> +
>> +int s5p_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim)
>> +{
>> +	return (readl(dsim->reg_base + S5P_DSIM_INTSRC))&
>> +			INTSRC_SW_RST_RELEASE;
>> +}
>> +
>> +unsigned int s5p_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = readl(dsim->reg_base + S5P_DSIM_INTMSK);
>> +
>> +	return reg;
>> +}
>> +
>> +void s5p_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim,
>> +		unsigned int mode, unsigned int mask)
>> +{
>> +	unsigned int reg = 0;
>> +
>> +	if (mask)
>> +		reg |= mode;
>> +	else
>> +		reg&= ~mode;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_INTMSK);
>> +}
>> +
>> +void s5p_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim,
>> +		unsigned int cfg)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = readl(dsim->reg_base + S5P_DSIM_FIFOCTRL);
>> +
>> +	writel(reg&  ~(cfg), dsim->reg_base + S5P_DSIM_FIFOCTRL);
>> +	mdelay(10);
>> +	reg |= cfg;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_FIFOCTRL);
>> +}
>> +
>> +/*
>> + * this function set PLL P, M and S value in D-PHY
>> + */
>> +void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
>> +		unsigned int value)
>> +{
>> +	writel(DSIM_AFC_CTL(value), dsim->reg_base + S5P_DSIM_PHYACCHR);
>> +}
>> +
>> +void s5p_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim,
>> +		unsigned int enable)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = readl(dsim->reg_base + S5P_DSIM_MDRESOL);
>> +
>> +	reg&= ~DSIM_MAIN_STAND_BY;
>> +
>> +	if (enable)
>> +		reg |= DSIM_MAIN_STAND_BY;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
>> +}
>> +
>> +void s5p_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim,
>> +	unsigned int width_resol, unsigned int height_resol)
>> +{
>> +	unsigned int reg;
>> +
>> +	/* standby should be set after configuration so set to not ready*/
>> +	reg = (readl(dsim->reg_base + S5P_DSIM_MDRESOL))&
>> +		~(DSIM_MAIN_STAND_BY);
>> +	writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
>> +
>> +	reg&= ~((0x7ff<<  16) | (0x7ff<<  0));
>> +	reg |= DSIM_MAIN_VRESOL(height_resol) | DSIM_MAIN_HRESOL(width_resol);
>> +
>> +	reg |= DSIM_MAIN_STAND_BY;
>> +	writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
>> +}
>> +
>> +void s5p_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim,
>> +	unsigned int cmd_allow, unsigned int vfront, unsigned int vback)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = (readl(dsim->reg_base + S5P_DSIM_MVPORCH))&
>> +		~((DSIM_CMD_ALLOW_MASK) | (DSIM_STABLE_VFP_MASK) |
>> +		(DSIM_MAIN_VBP_MASK));
>> +
>> +	reg |= (DSIM_CMD_ALLOW_SHIFT(cmd_allow&  0xf) |
>> +		DSIM_STABLE_VFP_SHIFT(vfront&  0x7ff) |
>> +		DSIM_MAIN_VBP_SHIFT(vback&  0x7ff));
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_MVPORCH);
>> +}
>> +
>> +void s5p_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim,
>> +	unsigned int front, unsigned int back)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = (readl(dsim->reg_base + S5P_DSIM_MHPORCH))&
>> +		~((DSIM_MAIN_HFP_MASK) | (DSIM_MAIN_HBP_MASK));
>> +
>> +	reg |= DSIM_MAIN_HFP_SHIFT(front) | DSIM_MAIN_HBP_SHIFT(back);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_MHPORCH);
>> +}
>> +
>> +void s5p_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim,
>> +	unsigned int vert, unsigned int hori)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = (readl(dsim->reg_base + S5P_DSIM_MSYNC))&
>> +		~((DSIM_MAIN_VSA_MASK) | (DSIM_MAIN_HSA_MASK));
>> +
>> +	reg |= (DSIM_MAIN_VSA_SHIFT(vert&  0x3ff) |
>> +		DSIM_MAIN_HSA_SHIFT(hori));
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_MSYNC);
>> +}
>> +
>> +void s5p_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim,
>> +	unsigned int vert, unsigned int hori)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = (readl(dsim->reg_base + S5P_DSIM_SDRESOL))&
>> +		~(DSIM_SUB_STANDY_MASK);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
>> +
>> +	reg&= ~(DSIM_SUB_VRESOL_MASK) | ~(DSIM_SUB_HRESOL_MASK);
>> +	reg |= (DSIM_SUB_VRESOL_SHIFT(vert&  0x7ff) |
>> +		DSIM_SUB_HRESOL_SHIFT(hori&  0x7ff));
>> +	writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
>> +
>> +	reg |= DSIM_SUB_STANDY_SHIFT(1);
>> +	writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
>> +}
>> +
>> +void s5p_mipi_dsi_init_config(struct mipi_dsim_device *dsim)
>> +{
>> +	struct mipi_dsim_config *dsim_config = dsim->dsim_config;
>> +
>> +	unsigned int cfg = (readl(dsim->reg_base + S5P_DSIM_CONFIG))&
>> +		~((1<<  28) | (0x1f<<  20) | (0x3<<  5));
>> +
>> +	cfg =	((DSIM_AUTO_FLUSH(dsim_config->auto_flush)) |
>> +		(DSIM_EOT_DISABLE(dsim_config->eot_disable)) |
>> +		(DSIM_AUTO_MODE_SHIFT(dsim_config->auto_vertical_cnt)) |
>> +		(DSIM_HSE_MODE_SHIFT(dsim_config->hse)) |
>> +		(DSIM_HFP_MODE_SHIFT(dsim_config->hfp)) |
>> +		(DSIM_HBP_MODE_SHIFT(dsim_config->hbp)) |
>> +		(DSIM_HSA_MODE_SHIFT(dsim_config->hsa)) |
>> +		(DSIM_NUM_OF_DATALANE_SHIFT(dsim_config->e_no_data_lane)));
>> +
>> +	writel(cfg, dsim->reg_base + S5P_DSIM_CONFIG);
>> +}
>> +
>> +void s5p_mipi_dsi_display_config(struct mipi_dsim_device *dsim,
>> +				struct mipi_dsim_config *dsim_config)
>> +{
>> +	u32 reg = (readl(dsim->reg_base + S5P_DSIM_CONFIG))&
>> +		~((0x3<<  26) | (1<<  25) | (0x3<<  18) | (0x7<<  12) |
>> +		(0x3<<  16) | (0x7<<  8));
>> +
>> +	if (dsim_config->e_interface == DSIM_VIDEO)
>> +		reg |= (1<<  25);
>> +	else if (dsim_config->e_interface == DSIM_COMMAND)
>> +		reg&= ~(1<<  25);
>> +	else {
>> +		dev_err(dsim->dev, "unknown lcd type.\n");
>> +		return;
>> +	}
>> +
>> +	/* main lcd */
>> +	reg |= ((u8) (dsim_config->e_burst_mode)&  0x3)<<  26 |
>> +		((u8) (dsim_config->e_virtual_ch)&  0x3)<<  18 |
>> +		((u8) (dsim_config->e_pixel_format)&  0x7)<<  12;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_CONFIG);
>> +}
>> +
>> +void s5p_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane,
>> +	unsigned int enable)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = readl(dsim->reg_base + S5P_DSIM_CONFIG);
>> +
>> +	if (enable)
>> +		reg |= DSIM_LANE_ENx(lane);
>> +	else
>> +		reg&= ~DSIM_LANE_ENx(lane);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_CONFIG);
>> +}
>> +
>> +
>> +void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
>> +	unsigned int count)
>> +{
>> +	unsigned int cfg;
>> +
>> +	/* get the data lane number. */
>> +	cfg = DSIM_NUM_OF_DATALANE_SHIFT(count);
>> +
>> +	writel(cfg, dsim->reg_base + S5P_DSIM_CONFIG);
>> +}
>> +
>> +void s5p_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable,
>> +	unsigned int afc_code)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PHYACCHR);
>> +
>> +	if (enable) {
>> +		reg |= (1<<  14);
>> +		reg&= ~(0x7<<  5);
>> +		reg |= (afc_code&  0x7)<<  5;
>> +	} else
>> +		reg&= ~(1<<  14);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PHYACCHR);
>> +}
>> +
>> +void s5p_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim,
>> +	unsigned int enable)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL))&
>> +		~(DSIM_PLL_BYPASS_SHIFT(0x1));
>> +
>> +	reg |= DSIM_PLL_BYPASS_SHIFT(enable);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p,
>> +	unsigned int m, unsigned int s)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PLLCTRL);
>> +
>> +	reg |= ((p&  0x3f)<<  13) | ((m&  0x1ff)<<  4) | ((s&  0x7)<<  1);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim,
>> +		unsigned int freq_band)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL))&
>> +		~(DSIM_FREQ_BAND_SHIFT(0x1f));
>> +
>> +	reg |= DSIM_FREQ_BAND_SHIFT(freq_band&  0x1f);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim,
>> +		unsigned int pre_divider, unsigned int main_divider,
>> +		unsigned int scaler)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL))&
>> +		~(0x7ffff<<  1);
>> +
>> +	reg |= (pre_divider&  0x3f)<<  13 | (main_divider&  0x1ff)<<  4 |
>> +		(scaler&  0x7)<<  1;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim,
>> +	unsigned int lock_time)
>> +{
>> +	writel(lock_time, dsim->reg_base + S5P_DSIM_PLLTMR);
>> +}
>> +
>> +void s5p_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim, unsigned int enable)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL))&
>> +		~(DSIM_PLL_EN_SHIFT(0x1));
>> +
>> +	reg |= DSIM_PLL_EN_SHIFT(enable&  0x1);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim,
>> +		unsigned int src)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL))&
>> +		~(DSIM_BYTE_CLK_SRC_SHIFT(0x3));
>> +
>> +	reg |= (DSIM_BYTE_CLK_SRC_SHIFT(src));
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim,
>> +		unsigned int enable)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL))&
>> +		~(DSIM_BYTE_CLKEN_SHIFT(0x1));
>> +
>> +	reg |= DSIM_BYTE_CLKEN_SHIFT(enable);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim,
>> +		unsigned int enable, unsigned int prs_val)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL))&
>> +		~(DSIM_ESC_CLKEN_SHIFT(0x1) | 0xffff);
>> +
>> +	reg |= DSIM_ESC_CLKEN_SHIFT(enable);
>> +	if (enable)
>> +		reg |= prs_val;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim,
>> +		unsigned int lane_sel, unsigned int enable)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_CLKCTRL);
>> +
>> +	if (enable)
>> +		reg |= DSIM_LANE_ESC_CLKEN(lane_sel);
>> +	else
>> +
>> +		reg&= ~DSIM_LANE_ESC_CLKEN(lane_sel);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim,
>> +	unsigned int enable)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_ESCMODE))&
>> +		~(DSIM_FORCE_STOP_STATE_SHIFT(0x1));
>> +
>> +	reg |= (DSIM_FORCE_STOP_STATE_SHIFT(enable&  0x1));
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
>> +}
>> +
>> +unsigned int s5p_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_STATUS);
>> +
>> +	/**
>> +	 * check clock and data lane states.
>> +	 * if MIPI-DSI controller was enabled at bootloader then
>> +	 * TX_READY_HS_CLK is enabled otherwise STOP_STATE_CLK.
>> +	 * so it should be checked for two case.
>> +	 */
>> +	if ((reg&  DSIM_STOP_STATE_DAT(0xf))&&
>> +			((reg&  DSIM_STOP_STATE_CLK) ||
>> +			 (reg&  DSIM_TX_READY_HS_CLK)))
>> +		return 1;
>> +
>> +	return 0;
>> +}
>> +
>> +void s5p_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim,
>> +		unsigned int cnt_val)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_ESCMODE))&
>> +		~(DSIM_STOP_STATE_CNT_SHIFT(0x7ff));
>> +
>> +	reg |= (DSIM_STOP_STATE_CNT_SHIFT(cnt_val&  0x7ff));
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
>> +}
>> +
>> +void s5p_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim,
>> +		unsigned int timeout)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_TIMEOUT))&
>> +		~(DSIM_BTA_TOUT_SHIFT(0xff));
>> +
>> +	reg |= (DSIM_BTA_TOUT_SHIFT(timeout));
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_TIMEOUT);
>> +}
>> +
>> +void s5p_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim,
>> +		unsigned int timeout)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_TIMEOUT))&
>> +		~(DSIM_LPDR_TOUT_SHIFT(0xffff));
>> +
>> +	reg |= (DSIM_LPDR_TOUT_SHIFT(timeout));
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_TIMEOUT);
>> +}
>> +
>> +void s5p_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim,
>> +		unsigned int lp)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_ESCMODE);
>> +
>> +	reg&= ~DSIM_CMD_LPDT_LP;
>> +
>> +	if (lp)
>> +		reg |= DSIM_CMD_LPDT_LP;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
>> +}
>> +
>> +void s5p_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim,
>> +		unsigned int lp)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_ESCMODE);
>> +
>> +	reg&= ~DSIM_TX_LPDT_LP;
>> +
>> +	if (lp)
>> +		reg |= DSIM_TX_LPDT_LP;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
>> +}
>> +
>> +void s5p_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim,
>> +		unsigned int enable)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL))&
>> +		~(DSIM_TX_REQUEST_HSCLK_SHIFT(0x1));
>> +
>> +	reg |= DSIM_TX_REQUEST_HSCLK_SHIFT(enable);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim,
>> +		unsigned int swap_en)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PHYACCHR1);
>> +
>> +	reg&= ~(0x3<<  0);
>> +	reg |= (swap_en&  0x3)<<  0;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PHYACCHR1);
>> +}
>> +
>> +void s5p_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim,
>> +		unsigned int hs_zero)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL))&
>> +		~(0xf<<  28);
>> +
>> +	reg |= ((hs_zero&  0xf)<<  28);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
>> +}
>> +
>> +void s5p_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep)
>> +{
>> +	unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL))&
>> +		~(0x7<<  20);
>> +
>> +	reg |= ((prep&  0x7)<<  20);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
>> +}
>> +
>> +unsigned int s5p_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim)
>> +{
>> +	return readl(dsim->reg_base + S5P_DSIM_INTSRC);
>> +}
>> +
>> +void s5p_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim,
>> +					unsigned int src)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
>> +
>> +	reg |= src;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
>> +}
>> +
>> +void s5p_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim,
>> +					unsigned int src, unsigned int enable)
>> +{
>> +	unsigned int reg = 0;
>> +
>> +	if (enable)
>> +		reg |= src;
>> +	else
>> +		reg&= ~src;
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
>> +}
>> +
>> +unsigned int s5p_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int reg;
>> +
>> +	reg = readl(dsim->reg_base + S5P_DSIM_STATUS);
>> +
>> +	return reg&  (1<<  31) ? 1 : 0;
>> +}
>> +
>> +unsigned int s5p_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim)
>> +{
>> +	return readl(dsim->reg_base + S5P_DSIM_FIFOCTRL)&  ~(0x1f);
>> +}
>> +
>> +void s5p_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim,
>> +	unsigned int di, unsigned int data0, unsigned int data1)
>> +{
>> +	unsigned int reg = (data1<<  16) | (data0<<  8) | ((di&  0x3f)<<  0);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PKTHDR);
>> +}
>> +
>> +void s5p_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim,
>> +	unsigned int di, unsigned int data0)
>> +{
>> +	unsigned int reg = (data0<<  8) | (di<<  0);
>> +
>> +	writel(reg, dsim->reg_base + S5P_DSIM_PKTHDR);
>> +}
>> +
>> +unsigned int s5p_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim)
>> +{
>> +	return readl(dsim->reg_base + S5P_DSIM_RXFIFO);
>> +}
>> +
>> +unsigned int _s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
>> +
>> +	return (reg&  INTSRC_FRAME_DONE) ? 1 : 0;
>> +}
>> +
>> +void _s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim)
>> +{
>> +	unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
>> +
>> +	writel(reg | INTSRC_FRAME_DONE, dsim->reg_base +
>> +		S5P_DSIM_INTSRC);
>> +}
>> +
>> +void s5p_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim,
>> +		unsigned int tx_data)
>> +{
>> +	writel(tx_data, dsim->reg_base + S5P_DSIM_PAYLOAD);
>> +}
>> diff --git a/drivers/video/s5p_mipi_dsi_lowlevel.h b/drivers/video/s5p_mipi_dsi_lowlevel.h
>> new file mode 100644
>> index 0000000..da3a63e
>> --- /dev/null
>> +++ b/drivers/video/s5p_mipi_dsi_lowlevel.h
>> @@ -0,0 +1,112 @@
>> +/* linux/drivers/video/s5p_mipi_dsi_lowlevel.h
>> + *
>> + * Header file for Samsung SoC MIPI-DSI lowlevel driver.
>> + *
>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd
>> + *
>> + * InKi Dae<[email-masked]>
>> + * Donghwa Lee<[email-masked]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#ifndef _S5P_MIPI_DSI_LOWLEVEL_H
>> +#define _S5P_MIPI_DSI_LOWLEVEL_H
>> +
>> +void s5p_mipi_dsi_func_reset(struct mipi_dsim_device *dsim);
>> +void s5p_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim);
>> +void s5p_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim);
>> +int s5p_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim);
>> +void s5p_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim,
>> +	unsigned int mode, unsigned int mask);
>> +void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
>> +					unsigned int count);
>> +void s5p_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim,
>> +					unsigned int cfg);
>> +void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
>> +				unsigned int value);
>> +void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
>> +				unsigned int value);
>> +void s5p_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim,
>> +		unsigned int enable);
>> +void s5p_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim,
>> +		unsigned int width_resol, unsigned int height_resol);
>> +void s5p_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim,
>> +	unsigned int cmd_allow, unsigned int vfront, unsigned int vback);
>> +void s5p_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim,
>> +			unsigned int front, unsigned int back);
>> +void s5p_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim,
>> +				unsigned int vert, unsigned int hori);
>> +void s5p_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim,
>> +				unsigned int vert, unsigned int hori);
>> +void s5p_mipi_dsi_init_config(struct mipi_dsim_device *dsim);
>> +void s5p_mipi_dsi_display_config(struct mipi_dsim_device *dsim,
>> +				struct mipi_dsim_config *dsim_config);
>> +void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
>> +				unsigned int count);
>> +void s5p_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane,
>> +				unsigned int enable);
>> +void s5p_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable,
>> +				unsigned int afc_code);
>> +void s5p_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim,
>> +				unsigned int enable);
>> +void s5p_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p,
>> +				unsigned int m, unsigned int s);
>> +void s5p_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim,
>> +				unsigned int freq_band);
>> +void s5p_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim,
>> +			unsigned int pre_divider, unsigned int main_divider,
>> +			unsigned int scaler);
>> +void s5p_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim,
>> +			unsigned int lock_time);
>> +void s5p_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim,
>> +					unsigned int enable);
>> +void s5p_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim,
>> +					unsigned int src);
>> +void s5p_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim,
>> +					unsigned int enable);
>> +void s5p_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim,
>> +				unsigned int enable, unsigned int prs_val);
>> +void s5p_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim,
>> +				unsigned int lane_sel, unsigned int enable);
>> +void s5p_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim,
>> +				unsigned int enable);
>> +unsigned int s5p_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim);
>> +void s5p_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim,
>> +				unsigned int cnt_val);
>> +void s5p_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim,
>> +				unsigned int timeout);
>> +void s5p_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim,
>> +				unsigned int timeout);
>> +void s5p_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim,
>> +					unsigned int lp);
>> +void s5p_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim,
>> +					unsigned int lp);
>> +void s5p_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim,
>> +				unsigned int enable);
>> +void s5p_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim,
>> +				unsigned int swap_en);
>> +void s5p_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim,
>> +				unsigned int hs_zero);
>> +void s5p_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep);
>> +unsigned int s5p_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim);
>> +unsigned int s5p_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim);
>> +void s5p_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim,
>> +					unsigned int src);
>> +void s5p_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim,
>> +					unsigned int src, unsigned int enable);
>> +unsigned int s5p_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim);
>> +unsigned int s5p_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim);
>> +unsigned int _s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim);
>> +void _s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim);
>> +void s5p_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, unsigned int di,
>> +				unsigned int data0, unsigned int data1);
>> +void s5p_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim,
>> +		unsigned int tx_data);
>> +void s5p_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim,
>> +		unsigned int data0, unsigned int data1);
>> +unsigned int s5p_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim);
>> +
>> +#endif /* _S5P_MIPI_DSI_LOWLEVEL_H */
>> diff --git a/drivers/video/s5p_mipi_dsi_regs.h b/drivers/video/s5p_mipi_dsi_regs.h
>> new file mode 100644
>> index 0000000..2ad482f
>> --- /dev/null
>> +++ b/drivers/video/s5p_mipi_dsi_regs.h
>> @@ -0,0 +1,149 @@
>> +/* linux/driver/video/s5p_mipi_dsi_regs.h
>> + *
>> + * Register definition file for Samsung MIPI-DSIM driver
>> + *
>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd
>> + *
>> + * InKi Dae<[email-masked]>
>> + * Donghwa Lee<[email-masked]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#ifndef _REGS_DSIM_H
>> +#define _REGS_DSIM_H
>> +
>> +#define S5P_DSIM_STATUS		0x0	/* Status register */
>> +#define S5P_DSIM_SWRST		0x4	/* Software reset register */
>> +#define S5P_DSIM_CLKCTRL	0x8	/* Clock control register */
>> +#define S5P_DSIM_TIMEOUT	0xc	/* Time out register */
>> +#define S5P_DSIM_CONFIG		0x10	/* Configuration register */
>> +#define S5P_DSIM_ESCMODE	0x14	/* Escape mode register */
>> +
>> +/* Main display image resolution register */
>> +#define S5P_DSIM_MDRESOL	0x18
>> +#define S5P_DSIM_MVPORCH	0x1c	/* Main display Vporch register */
>> +#define S5P_DSIM_MHPORCH	0x20	/* Main display Hporch register */
>> +#define S5P_DSIM_MSYNC		0x24	/* Main display sync area register */
>> +
>> +/* Sub display image resolution register */
>> +#define S5P_DSIM_SDRESOL	0x28
>> +#define S5P_DSIM_INTSRC		0x2c	/* Interrupt source register */
>> +#define S5P_DSIM_INTMSK		0x30	/* Interrupt mask register */
>> +#define S5P_DSIM_PKTHDR		0x34	/* Packet Header FIFO register */
>> +#define S5P_DSIM_PAYLOAD	0x38	/* Payload FIFO register */
>> +#define S5P_DSIM_RXFIFO		0x3c	/* Read FIFO register */
>> +#define S5P_DSIM_FIFOTHLD	0x40	/* FIFO threshold level register */
>> +#define S5P_DSIM_FIFOCTRL	0x44	/* FIFO status and control register */
>> +
>> +/* FIFO memory AC characteristic register */
>> +#define S5P_DSIM_PLLCTRL	0x4c	/* PLL control register */
>> +#define S5P_DSIM_PLLTMR		0x50	/* PLL timer register */
>> +#define S5P_DSIM_PHYACCHR	0x54	/* D-PHY AC characteristic register */
>> +#define S5P_DSIM_PHYACCHR1	0x58	/* D-PHY AC characteristic register1 */
>> +
>> +/* DSIM_STATUS */
>> +#define DSIM_STOP_STATE_DAT(x)		(((x)&  0xf)<<  0)
>> +#define DSIM_STOP_STATE_CLK		(1<<  8)
>> +#define DSIM_TX_READY_HS_CLK		(1<<  10)
>> +
>> +/* DSIM_SWRST */
>> +#define DSIM_FUNCRST			(1<<  16)
>> +#define DSIM_SWRST			(1<<  0)
>> +
>> +/* S5P_DSIM_TIMEOUT */
>> +#define DSIM_LPDR_TOUT_SHIFT(x)		((x)<<  0)
>> +#define DSIM_BTA_TOUT_SHIFT(x)		((x)<<  16)
>> +
>> +/* S5P_DSIM_CLKCTRL */
>> +#define DSIM_LANE_ESC_CLKEN(x)		(((x)&  0x1f)<<  19)
>> +#define DSIM_BYTE_CLKEN_SHIFT(x)	((x)<<  24)
>> +#define DSIM_BYTE_CLK_SRC_SHIFT(x)	((x)<<	25)
>> +#define DSIM_PLL_BYPASS_SHIFT(x)	((x)<<	27)
>> +#define DSIM_ESC_CLKEN_SHIFT(x)		((x)<<  28)
>> +#define DSIM_TX_REQUEST_HSCLK_SHIFT(x)	((x)<<  31)
>> +
>> +/* S5P_DSIM_CONFIG */
>> +#define DSIM_LANE_ENx(x)		(((x)&  0x1f)<<  0)
>> +#define DSIM_NUM_OF_DATALANE_SHIFT(x)	((x)<<  5)
>> +#define DSIM_HSA_MODE_SHIFT(x)		((x)<<  20)
>> +#define DSIM_HBP_MODE_SHIFT(x)		((x)<<  21)
>> +#define DSIM_HFP_MODE_SHIFT(x)		((x)<<  22)
>> +#define DSIM_HSE_MODE_SHIFT(x)		((x)<<  23)
>> +#define DSIM_AUTO_MODE_SHIFT(x)		((x)<<  24)
>> +#define DSIM_EOT_DISABLE(x)		((x)<<  28)
>> +#define DSIM_AUTO_FLUSH(x)		((x)<<  29)
>> +
>> +#define DSIM_NUM_OF_DATA_LANE(x)	((x)<<  DSIM_NUM_OF_DATALANE_SHIFT)
>> +
>> +/* S5P_DSIM_ESCMODE */
>> +#define DSIM_TX_LPDT_LP			(1<<  6)
>> +#define DSIM_CMD_LPDT_LP		(1<<  7)
>> +#define DSIM_FORCE_STOP_STATE_SHIFT(x)	((x)<<  20)
>> +#define DSIM_STOP_STATE_CNT_SHIFT(x)	((x)<<  21)
>> +
>> +/* S5P_DSIM_MDRESOL */
>> +#define DSIM_MAIN_STAND_BY		(1<<  31)
>> +#define DSIM_MAIN_VRESOL(x)		(((x)&  0x7ff)<<  16)
>> +#define DSIM_MAIN_HRESOL(x)		(((x)&  0X7ff)<<  0)
>> +
>> +/* S5P_DSIM_MVPORCH */
>> +#define DSIM_CMD_ALLOW_SHIFT(x)		((x)<<  28)
>> +#define DSIM_STABLE_VFP_SHIFT(x)	((x)<<  16)
>> +#define DSIM_MAIN_VBP_SHIFT(x)		((x)<<  0)
>> +#define DSIM_CMD_ALLOW_MASK		(0xf<<  28)
>> +#define DSIM_STABLE_VFP_MASK		(0x7ff<<  16)
>> +#define DSIM_MAIN_VBP_MASK		(0x7ff<<  0)
>> +
>> +/* S5P_DSIM_MHPORCH */
>> +#define DSIM_MAIN_HFP_SHIFT(x)		((x)<<  16)
>> +#define DSIM_MAIN_HBP_SHIFT(x)		((x)<<  0)
>> +#define DSIM_MAIN_HFP_MASK		((0xffff)<<  16)
>> +#define DSIM_MAIN_HBP_MASK		((0xffff)<<  0)
>> +
>> +/* S5P_DSIM_MSYNC */
>> +#define DSIM_MAIN_VSA_SHIFT(x)		((x)<<  22)
>> +#define DSIM_MAIN_HSA_SHIFT(x)		((x)<<  0)
>> +#define DSIM_MAIN_VSA_MASK		((0x3ff)<<  22)
>> +#define DSIM_MAIN_HSA_MASK		((0xffff)<<  0)
>> +
>> +/* S5P_DSIM_SDRESOL */
>> +#define DSIM_SUB_STANDY_SHIFT(x)	((x)<<  31)
>> +#define DSIM_SUB_VRESOL_SHIFT(x)	((x)<<  16)
>> +#define DSIM_SUB_HRESOL_SHIFT(x)	((x)<<  0)
>> +#define DSIM_SUB_STANDY_MASK		((0x1)<<  31)
>> +#define DSIM_SUB_VRESOL_MASK		((0x7ff)<<  16)
>> +#define DSIM_SUB_HRESOL_MASK		((0x7ff)<<  0)
>> +
>> +/* S5P_DSIM_INTSRC */
>> +#define INTSRC_PLL_STABLE		(1<<  31)
>> +#define INTSRC_SW_RST_RELEASE		(1<<  30)
>> +#define INTSRC_SFR_FIFO_EMPTY		(1<<  29)
>> +#define INTSRC_FRAME_DONE		(1<<  24)
>> +#define INTSRC_RX_DATA_DONE		(1<<  18)
>> +
>> +/* S5P_DSIM_INTMSK */
>> +#define INTMSK_FIFO_EMPTY              (1<<  29)
>> +#define INTMSK_BTA                     (1<<  25)
>> +#define INTMSK_FRAME_DONE              (1<<  24)
>> +#define INTMSK_RX_TIMEOUT              (1<<  21)
>> +#define INTMSK_BTA_TIMEOUT             (1<<  20)
>> +#define INTMSK_RX_DONE                 (1<<  18)
>> +#define INTMSK_RX_TE                   (1<<  17)
>> +#define INTMSK_RX_ACK                  (1<<  16)
>> +#define INTMSK_RX_ECC_ERR              (1<<  15)
>> +#define INTMSK_RX_CRC_ERR              (1<<  14)
>> +
>> +/* S5P_DSIM_FIFOCTRL */
>> +#define SFR_HEADER_EMPTY		(1<<  22)
>> +
>> +/* S5P_DSIM_PHYACCHR */
>> +#define DSIM_AFC_CTL(x)			(((x)&  0x7)<<  5)
>> +
>> +/* S5P_DSIM_PLLCTRL */
>> +#define DSIM_PLL_EN_SHIFT(x)		((x)<<  23)
>> +#define DSIM_FREQ_BAND_SHIFT(x)		((x)<<  24)
>> +
>> +#endif /* _REGS_DSIM_H */
>> diff --git a/include/linux/mipi_dsim.h b/include/linux/mipi_dsim.h
>> new file mode 100644
>> index 0000000..f54da24
>> --- /dev/null
>> +++ b/include/linux/mipi_dsim.h
>> @@ -0,0 +1,359 @@
>> +/* include/linux/mipi_dsim.h
>> + *
>> + * Platform data header for Samsung SoC MIPI-DSIM.
>> + *
>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd
>> + *
>> + * InKi Dae<[email-masked]>
>> + * Donghwa Lee<[email-masked]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#ifndef _LINUX_MIPI_DSIM_H
>> +#define _LINUX_MIPI_DSIM_H
>> +
>> +#include<linux/device.h>
>> +#include<linux/fb.h>
>> +
>> +#define PANEL_NAME_SIZE		(32)
>> +
>> +/*
>> + * Enumerate display interface type.
>> + *
>> + * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO.
>> + *
>> + * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface
>> + *	for main display and CPU Interface(same as I80 Interface) for main
>> + *	and sub display.
>> + */
>> +enum mipi_dsim_interface_type {
>> +	DSIM_COMMAND,
>> +	DSIM_VIDEO
>> +};
>> +
>> +enum mipi_dsim_virtual_ch_no {
>> +	DSIM_VIRTUAL_CH_0,
>> +	DSIM_VIRTUAL_CH_1,
>> +	DSIM_VIRTUAL_CH_2,
>> +	DSIM_VIRTUAL_CH_3
>> +};
>> +
>> +enum mipi_dsim_burst_mode_type {
>> +	DSIM_NON_BURST_SYNC_EVENT,
>> +	DSIM_BURST_SYNC_EVENT,
>> +	DSIM_NON_BURST_SYNC_PULSE,
>> +	DSIM_BURST,
>> +	DSIM_NON_VIDEO_MODE
>> +};
>> +
>> +enum mipi_dsim_no_of_data_lane {
>> +	DSIM_DATA_LANE_1,
>> +	DSIM_DATA_LANE_2,
>> +	DSIM_DATA_LANE_3,
>> +	DSIM_DATA_LANE_4
>> +};
>> +
>> +enum mipi_dsim_byte_clk_src {
>> +	DSIM_PLL_OUT_DIV8,
>> +	DSIM_EXT_CLK_DIV8,
>> +	DSIM_EXT_CLK_BYPASS
>> +};
>> +
>> +enum mipi_dsim_pixel_format {
>> +	DSIM_CMD_3BPP,
>> +	DSIM_CMD_8BPP,
>> +	DSIM_CMD_12BPP,
>> +	DSIM_CMD_16BPP,
>> +	DSIM_VID_16BPP_565,
>> +	DSIM_VID_18BPP_666PACKED,
>> +	DSIM_18BPP_666LOOSELYPACKED,
>> +	DSIM_24BPP_888
>> +};
>> +
>> +/*
>> + * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
>> + *
>> + * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
>> + * @eot_disable: enable or disable EoT packet in HS mode.
>> + * @auto_vertical_cnt: specifies auto vertical count mode.
>> + *	in Video mode, the vertical line transition uses line counter
>> + *	configured by VSA, VBP, and Vertical resolution.
>> + *	If this bit is set to '1', the line counter does not use VSA and VBP
>> + *	registers.(in command mode, this variable is ignored)
>> + * @hse: set horizontal sync event mode.
>> + *	In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
>> + *	start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
>> + *	this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
>> + *	(in mommand mode, this variable is ignored)
>> + * @hfp: specifies HFP disable mode.
>> + *	if this variable is set, DSI master ignores HFP area in VIDEO mode.
>> + *	(in command mode, this variable is ignored)
>> + * @hbp: specifies HBP disable mode.
>> + *	if this variable is set, DSI master ignores HBP area in VIDEO mode.
>> + *	(in command mode, this variable is ignored)
>> + * @hsa: specifies HSA disable mode.
>> + *	if this variable is set, DSI master ignores HSA area in VIDEO mode.
>> + *	(in command mode, this variable is ignored)
>> + * @cma_allow: specifies the number of horizontal lines, where command packet
>> + *	transmission is allowed after Stable VFP period.
>> + * @e_interface: specifies interface to be used.(CPU or RGB interface)
>> + * @e_virtual_ch: specifies virtual channel number that main or
>> + *	sub diaplsy uses.
>> + * @e_pixel_format: specifies pixel stream format for main or sub display.
>> + * @e_burst_mode: selects Burst mode in Video mode.
>> + *	in Non-burst mode, RGB data area is filled with RGB data and NULL
>> + *	packets, according to input bandwidth of RGB interface.
>> + *	In Burst mode, RGB data area is filled with RGB data only.
>> + * @e_no_data_lane: specifies data lane count to be used by Master.
>> + * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
>> + *	DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
>> + * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
>> + *	clock(System clock cycle base)
>> + *	if the timer value goes to 0x00000000, the clock stable bit of status
>> + *	and interrupt register is set.
>> + * @esc_clk: specifies escape clock frequency for getting the escape clock
>> + *	prescaler value.
>> + * @stop_holding_cnt: specifies the interval value between transmitting
>> + *	read packet(or write "set_tear_on" command) and BTA request.
>> + *	after transmitting read packet or write "set_tear_on" command,
>> + *	BTA requests to D-PHY automatically. this counter value specifies
>> + *	the interval between them.
>> + * @bta_timeout: specifies the timer for BTA.
>> + *	this register specifies time out from BTA request to change
>> + *	the direction with respect to Tx escape clock.
>> + * @rx_timeout: specifies the timer for LP Rx mode timeout.
>> + *	this register specifies time out on how long RxValid deasserts,
>> + *	after RxLpdt asserts with respect to Tx escape clock.
>> + *	- RxValid specifies Rx data valid indicator.
>> + *	- RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
>> + *	- RxValid and RxLpdt specifies signal from D-PHY.
>> + */
>> +struct mipi_dsim_config {
>> +	unsigned char			auto_flush;
>> +	unsigned char			eot_disable;
>> +
>> +	unsigned char			auto_vertical_cnt;
>> +	unsigned char			hse;
>> +	unsigned char			hfp;
>> +	unsigned char			hbp;
>> +	unsigned char			hsa;
>> +	unsigned char			cmd_allow;
>> +
>> +	enum mipi_dsim_interface_type	e_interface;
>> +	enum mipi_dsim_virtual_ch_no	e_virtual_ch;
>> +	enum mipi_dsim_pixel_format	e_pixel_format;
>> +	enum mipi_dsim_burst_mode_type	e_burst_mode;
>> +	enum mipi_dsim_no_of_data_lane	e_no_data_lane;
>> +	enum mipi_dsim_byte_clk_src	e_byte_clk;
>> +
>> +	/*
>> +	 * ===========================================
>> +	 * |    P    |    M    |    S    |    MHz    |
>> +	 * -------------------------------------------
>> +	 * |    3    |   100   |    3    |    100    |
>> +	 * |    3    |   100   |    2    |    200    |
>> +	 * |    3    |    63   |    1    |    252    |
>> +	 * |    4    |   100   |    1    |    300    |
>> +	 * |    4    |   110   |    1    |    330    |
>> +	 * |   12    |   350   |    1    |    350    |
>> +	 * |    3    |   100   |    1    |    400    |
>> +	 * |    4    |   150   |    1    |    450    |
>> +	 * |    6    |   118   |    1    |    472    |
>> +	 * |	3    |   120   |    1    |    480    |
>> +	 * |   12    |   250   |    0    |    500    |
>> +	 * |    4    |   100   |    0    |    600    |
>> +	 * |    3    |    81   |    0    |    648    |
>> +	 * |    3    |    88   |    0    |    704    |
>> +	 * |    3    |    90   |    0    |    720    |
>> +	 * |    3    |   100   |    0    |    800    |
>> +	 * |   12    |   425   |    0    |    850    |
>> +	 * |    4    |   150   |    0    |    900    |
>> +	 * |   12    |   475   |    0    |    950    |
>> +	 * |    6    |   250   |    0    |   1000    |
>> +	 * -------------------------------------------
>> +	 */
>> +
>> +	/*
>> +	 * pms could be calculated as the following.
>> +	 * M * 24 / P * 2 ^ S = MHz
>> +	 */
>> +	unsigned char			p;
>> +	unsigned short			m;
>> +	unsigned char			s;
>> +
>> +	unsigned int			pll_stable_time;
>> +	unsigned long			esc_clk;
>> +
>> +	unsigned short			stop_holding_cnt;
>> +	unsigned char			bta_timeout;
>> +	unsigned short			rx_timeout;
>> +};
>> +
>> +/*
>> + * struct mipi_dsim_device - global interface for mipi-dsi driver.
>> + *
>> + * @dev: driver model representation of the device.
>> + * @id: unique device id.
>> + * @clock: pointer to MIPI-DSI clock of clock framework.
>> + * @irq: interrupt number to MIPI-DSI controller.
>> + * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
>> + *	(virtual address)
>> + * @lock: the mutex protecting this data structure.
>> + * @dsim_info: infomation for configuring mipi-dsi controller.
>> + * @master_ops: callbacks to mipi-dsi operations.
>> + * @dsim_lcd_dev: pointer to activated ddi device.
>> + *	(it would be registered by mipi-dsi driver.)
>> + * @dsim_lcd_drv: pointer to activated_ddi driver.
>> + *	(it would be registered by mipi-dsi driver.)
>> + * @lcd_info: pointer to mipi_lcd_info structure.
>> + * @state: specifies status of MIPI-DSI controller.
>> + *	the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
>> + * @data_lane: specifiec enabled data lane number.
>> + *	this variable would be set by driver according to e_no_data_lane
>> + *	automatically.
>> + * @e_clk_src: select byte clock source.
>> + * @pd: pointer to MIPI-DSI driver platform data.
>> + */
>> +struct mipi_dsim_device {
>> +	struct device			*dev;
>> +	int				id;
>> +	struct resource			*res;
>> +	struct clk			*clock;
>> +	unsigned int			irq;
>> +	void __iomem			*reg_base;
>> +	struct mutex			lock;
>> +
>> +	struct mipi_dsim_config		*dsim_config;
>> +	struct mipi_dsim_master_ops	*master_ops;
>> +	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
>> +	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
>> +
>> +	unsigned int			state;
>> +	unsigned int			data_lane;
>> +	unsigned int			e_clk_src;
>> +	bool				suspended;
>> +
>> +	struct mipi_dsim_platform_data	*pd;
>> +};
>> +
>> +/*
>> + * struct mipi_dsim_platform_data - interface to platform data
>> + *	for mipi-dsi driver.
>> + *
>> + * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
>> + *	lcd panel driver searched would be actived.
>> + * @dsim_config: pointer of structure for configuring mipi-dsi controller.
>> + * @enabled: indicate whether mipi controller got enabled or not.
>> + * @lcd_panel_info: pointer for lcd panel specific structure.
>> + *	this structure specifies width, height, timing and polarity and so on.
>> + * @phy_enable: pointer to a callback controlling D-PHY enable/reset
>> + */
>> +struct mipi_dsim_platform_data {
>> +	char				lcd_panel_name[PANEL_NAME_SIZE];
>> +
>> +	struct mipi_dsim_config		*dsim_config;
>> +	unsigned int			enabled;
>> +	void				*lcd_panel_info;
>> +
>> +	int (*phy_enable)(struct platform_device *pdev, bool on);
>> +};
>> +
>> +/*
>> + * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
>> + *
>> + * @cmd_write: transfer command to lcd panel at LP mode.
>> + * @cmd_read: read command from rx register.
>> + * @get_dsim_frame_done: get the status that all screen data have been
>> + *	transferred to mipi-dsi.
>> + * @clear_dsim_frame_done: clear frame done status.
>> + * @get_fb_frame_done: get frame done status of display controller.
>> + * @trigger: trigger display controller.
>> + *	- this one would be used only in case of CPU mode.
>> + *  @set_early_blank_mode: set framebuffer blank mode.
>> + *	- this callback should be called prior to fb_blank() by a client driver
>> + *	only if needing.
>> + *  @set_blank_mode: set framebuffer blank mode.
>> + *	- this callback should be called after fb_blank() by a client driver
>> + *	only if needing.
>> + */
>> +
>> +struct mipi_dsim_master_ops {
>> +	int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
>> +		const unsigned char *data0, unsigned int data1);
>> +	int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
>> +		unsigned int data0, unsigned int req_size, u8 *rx_buf);
>> +	int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
>> +	int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
>> +
>> +	int (*get_fb_frame_done)(struct fb_info *info);
>> +	void (*trigger)(struct fb_info *info);
>> +	int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power);
>> +	int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power);
>> +};
>> +
>> +/*
>> + * device structure for mipi-dsi based lcd panel.
>> + *
>> + * @name: name of the device to use with this device, or an
>> + *	alias for that name.
>> + * @dev: driver model representation of the device.
>> + * @id: id of device to be registered.
>> + * @bus_id: bus id for identifing connected bus
>> + *	and this bus id should be same as id of mipi_dsim_device.
>> + * @irq: irq number for signaling when framebuffer transfer of
>> + *	lcd panel module is completed.
>> + *	this irq would be used only for MIPI-DSI based CPU mode lcd panel.
>> + * @master: pointer to mipi-dsi master device object.
>> + * @platform_data: lcd panel specific platform data.
>> + */
>> +struct mipi_dsim_lcd_device {
>> +	char			*name;
>> +	struct device		dev;
>> +	int			id;
>> +	int			bus_id;
>> +	int			irq;
>> +
>> +	struct mipi_dsim_device *master;
>> +	void			*platform_data;
>> +};
>> +
>> +/*
>> + * driver structure for mipi-dsi based lcd panel.
>> + *
>> + * this structure should be registered by lcd panel driver.
>> + * mipi-dsi driver seeks lcd panel registered through name field
>> + * and calls these callback functions in appropriate time.
>> + *
>> + * @name: name of the driver to use with this device, or an
>> + *	alias for that name.
>> + * @id: id of driver to be registered.
>> + *	this id would be used for finding device object registered.
>> + */
>> +struct mipi_dsim_lcd_driver {
>> +	char			*name;
>> +	int			id;
>> +
>> +	void	(*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable);
>> +	void	(*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev);
>> +	int	(*probe)(struct mipi_dsim_lcd_device *dsim_dev);
>> +	int	(*remove)(struct mipi_dsim_lcd_device *dsim_dev);
>> +	void	(*shutdown)(struct mipi_dsim_lcd_device *dsim_dev);
>> +	int	(*suspend)(struct mipi_dsim_lcd_device *dsim_dev);
>> +	int	(*resume)(struct mipi_dsim_lcd_device *dsim_dev);
>> +};
>> +
>> +/*
>> + * register mipi_dsim_lcd_device to mipi-dsi master.
>> + */
>> +int s5p_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
>> +						*lcd_dev);
>> +/**
>> + * register mipi_dsim_lcd_driver object defined by lcd panel driver
>> + * to mipi-dsi driver.
>> + */
>> +int s5p_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
>> +						*lcd_drv);
>> +#endif /* _LINUX_MIPI_DSIM_H */
> 
>