From: nicolas.ferre@atmel•com (Nicolas Ferre)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v3 3/3] ARM: dts: add nodes for atmel hsmci controllers for atmel platforms
Date: Tue, 22 May 2012 15:11:59 +0200 [thread overview]
Message-ID: <4FBB909F.4090606@atmel.com> (raw)
In-Reply-To: <1337681352-18521-4-git-send-email-ludovic.desroches@atmel.com>
On 05/22/2012 12:09 PM, ludovic.desroches at atmel.com :
> From: Ludovic Desroches <ludovic.desroches@atmel•com>
>
> Add nodes for mci controllers.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel•com>
> ---
> arch/arm/boot/dts/at91sam9g20.dtsi | 12 ++++++++++++
Maybe this one will have to be reworked on top of new ADC declarations.
Maybe also take into account the device tree support for sam9260: it is
linked with 9g20 support...
otherwise, once rebased you can add my:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel•com>
(and I think that this one also should go through arm-soc)
> arch/arm/boot/dts/at91sam9g25ek.dts | 16 ++++++++++++++++
> arch/arm/boot/dts/at91sam9g45.dtsi | 24 ++++++++++++++++++++++++
> arch/arm/boot/dts/at91sam9m10g45ek.dts | 17 +++++++++++++++++
> arch/arm/boot/dts/at91sam9x5.dtsi | 24 ++++++++++++++++++++++++
> 5 files changed, 93 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
> index 773ef48..6a28bfe 100644
> --- a/arch/arm/boot/dts/at91sam9g20.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20.dtsi
> @@ -197,6 +197,18 @@
> interrupts = <10 4>;
> status = "disabled";
> };
> +
> + mmc0: mmc at fffa800 {
> + compatible = "atmel,hsmci";
> + reg = <0xfffa800 0x600>;
> + interrupts = <9 4>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + slot at 0 {
> + reg = <0>;
> + };
> + };
> };
>
> nand0: nand at 40000000 {
> diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
> index 7829a4d..dd94f4b 100644
> --- a/arch/arm/boot/dts/at91sam9g25ek.dts
> +++ b/arch/arm/boot/dts/at91sam9g25ek.dts
> @@ -32,6 +32,22 @@
> phy-mode = "rmii";
> status = "okay";
> };
> +
> + mmc0: mmc at f0008000 {
> + status = "okay";
> + slot at 0 {
> + bus-width = <4>;
> + cd-gpios = <&pioD 15 0>;
> + };
> + };
> +
> + mmc1: mmc at f000c000 {
> + status = "okay";
> + slot at 0 {
> + bus-width = <4>;
> + cd-gpios = <&pioD 14 0>;
> + };
> + };
> };
>
> usb0: ohci at 00600000 {
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index c804214..2922648 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -199,6 +199,30 @@
> interrupts = <25 4>;
> status = "disabled";
> };
> +
> + mmc0: mmc at fff80000 {
> + compatible = "atmel,hsmci";
> + reg = <0xfff80000 0x600>;
> + interrupts = <11 4>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + slot at 0 {
> + reg = <0>;
> + };
> + };
> +
> + mmc1: mmc at fffd0000 {
> + compatible = "atmel,hsmci";
> + reg = <0xfffd0000 0x600>;
> + interrupts = <29 4>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + slot at 0 {
> + reg = <0>;
> + };
> + };
> };
>
> nand0: nand at 40000000 {
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index a3633bd..bc4cb3c 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -46,6 +46,23 @@
> phy-mode = "rmii";
> status = "okay";
> };
> +
> + mmc0: mmc at fff80000 {
> + status = "okay";
> + slot at 0 {
> + bus-width = <4>;
> + cd-gpios = <&pioD 10 0>;
> + };
> + };
> +
> + mmc1: mmc at fffd0000 {
> + status = "okay";
> + slot at 0 {
> + bus-width = <4>;
> + cd-gpios = <&pioD 11 0>;
> + wp-gpios = <&pioD 29 0>;
> + };
> + };
> };
>
> nand0: nand at 40000000 {
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index dd4ed74..d5999b2 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -190,6 +190,30 @@
> interrupts = <27 4>;
> status = "disabled";
> };
> +
> + mmc0: mmc at f0008000 {
> + compatible = "atmel,hsmci";
> + reg = <0xf0008000 0x600>;
> + interrupts = <12 4>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + slot at 0 {
> + reg = <0>;
> + };
> + };
> +
> + mmc1: mmc at f000c000 {
> + compatible = "atmel,hsmci";
> + reg = <0xf000c000 0x600>;
> + interrupts = <26 4>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + slot at 0 {
> + reg = <0>;
> + };
> + };
> };
>
> nand0: nand at 40000000 {
--
Nicolas Ferre
next prev parent reply other threads:[~2012-05-22 13:11 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-22 10:09 [PATCH v3 0/3] atmel-mci device tree support ludovic.desroches at atmel.com
2012-05-22 10:09 ` [PATCH v3 1/3] mmc: atmel-mci: add " ludovic.desroches at atmel.com
2012-05-22 12:55 ` Nicolas Ferre
2012-05-22 14:08 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-22 14:48 ` ludovic.desroches
2012-05-22 15:10 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-22 15:18 ` Nicolas Ferre
2012-05-23 7:23 ` [PATCH v4 " ludovic.desroches at atmel.com
2012-05-24 9:43 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-24 14:40 ` Chris Ball
2012-05-22 10:09 ` [PATCH v3 2/3] ARM: at91: add clocks for DT entries ludovic.desroches at atmel.com
2012-05-22 12:56 ` Nicolas Ferre
2012-05-22 14:11 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-23 19:38 ` [PATCH v4 " ludovic.desroches at atmel.com
2012-05-24 9:43 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-22 10:09 ` [PATCH v3 3/3] ARM: dts: add nodes for atmel hsmci controllers for atmel platforms ludovic.desroches at atmel.com
2012-05-22 13:11 ` Nicolas Ferre [this message]
2012-05-22 14:13 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-22 14:41 ` ludovic.desroches
2012-05-23 19:42 ` [PATCH v4 " ludovic.desroches at atmel.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FBB909F.4090606@atmel.com \
--to=nicolas.ferre@atmel$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox