Subject: [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4

From: [email-masked] (Jon Hunter)
Date: Wed, 30 May 2012 09:42:45 -0500

On 05/29/2012 10:19 PM, Xiao Jiang wrote:
> Jon Hunter wrote:
>> On 05/25/2012 05:42 AM, jgq516 at gmail.com wrote:
>>  
>>> From: Xiao Jiang <[email-masked]>
>>>
>>> Add wdt node to support dt.
>>>
>>> Signed-off-by: Xiao Jiang <[email-masked]>
>>> ---
>>>  arch/arm/boot/dts/omap3.dtsi |    5 +++++
>>>  arch/arm/boot/dts/omap4.dtsi |    5 +++++
>>>  2 files changed, 10 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
>>> index 99474fa..039df5c 100644
>>> --- a/arch/arm/boot/dts/omap3.dtsi
>>> +++ b/arch/arm/boot/dts/omap3.dtsi
>>> @@ -215,5 +215,10 @@
>>>              compatible = "ti,omap3-hsmmc";
>>>              ti,hwmods = "mmc3";
>>>          };
>>> +
>>> +        wdt: wdt at 48314000{
>>>     
>>
>> Minor comment, may be call this wdt2 as this is watchdog timer 2. Also
>> ass a space between the address and the "{".
>>
>>   
> Ok, will change it to "wdt2: wdt at 48314000 {".
>>> +            compatible = "ti,omap3-wdt";
>>> +            ti,hwmods = "wd_timer2";
>>> +        };
>>>      };
>>>  };
>>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>>> index 359c497..d01403d 100644
>>> --- a/arch/arm/boot/dts/omap4.dtsi
>>> +++ b/arch/arm/boot/dts/omap4.dtsi
>>> @@ -272,5 +272,10 @@
>>>              ti,hwmods = "mmc5";
>>>              ti,needs-special-reset;
>>>          };
>>> +
>>> +        wdt: wdt at 4a314000{
>>>     
>>
>> Same as above.
>>
>>   
> Ditto.
>>> +            compatible = "ti,omap4-wdt";
>>> +            ti,hwmods = "wd_timer2";
>>> +        };
>>>      };
>>>  };
>>>     
>>
>> Also we should add some documentation to describe the binding. Here it
>> is very simple, but nonetheless we should have something as we have for
>> gpio [1].
>>
>>   
> Thanks for reminding, how about below patch?
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
> b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
> new file mode 100644
> index 0000000..4272d06
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
> @@ -0,0 +1,15 @@
> +TI Watchdog Timer (WDT) Controller for OMAP
> +
> +Required properties:
> +- compatible:
> +  - "ti,omap2-wdt" for OMAP2
> +  - "ti,omap3-wdt" for OMAP3
> +  - "ti,omap4-wdt" for OMAP4
> +- ti,hwmods: Name of the hwmod associated to the WDT
> +
> +Examples:
> +
> +wdt2: wdt at 73f98000 {
> +       compatible = "ti,omap4-wdt";
> +       ti,hwmods = "wd_timer2";
> +};

Yes looks good. Thanks! Minor nit-pick in the example I would just copy
the omap4 node completely with the actual omap4 address :-)

Cheers
Jon