Subject: [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4

From: [email-masked] (Cousson, Benoit)
Date: Thu, 31 May 2012 22:59:53 +0200

On 5/31/2012 4:55 PM, Jon Hunter wrote:
> On 05/31/2012 12:51 AM, Xiao Jiang wrote:
>> Hi Jon and Benoit,
>>>> Thanks for reminding, how about below patch?
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
>>>> b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
>>>> new file mode 100644
>>>> index 0000000..4272d06
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
>>>> @@ -0,0 +1,15 @@
>>>> +TI Watchdog Timer (WDT) Controller for OMAP
>>>> +
>>>> +Required properties:
>>>> +- compatible:
>>>> +  - "ti,omap2-wdt" for OMAP2
>>>> +  - "ti,omap3-wdt" for OMAP3
>>>> +  - "ti,omap4-wdt" for OMAP4
>>>> +- ti,hwmods: Name of the hwmod associated to the WDT
>>>> +
>>>> +Examples:
>>>> +
>>>> +wdt2: wdt at 73f98000 {
>>>> +       compatible = "ti,omap4-wdt";
>>>> +       ti,hwmods = "wd_timer2";
>>>> +};
>>>>
>>>
>>> Yes looks good. Thanks! Minor nit-pick in the example I would just copy
>>> the omap4 node completely with the actual omap4 address :-)
>>>
>>>
>> Oops, wrong addr, :). Perhaps we can drop address as you said, since the
>> right addresses are defined
>> in wd_timer2 hwmod (see [1]), and wdt also works without the address as
>> follows.
>>
>> diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
>> index f2ab4ea..0017bd8 100644
>> --- a/arch/arm/boot/dts/omap2.dtsi
>> +++ b/arch/arm/boot/dts/omap2.dtsi
>> @@ -63,5 +63,10 @@
>>                         ti,hwmods = "uart3";
>>                         clock-frequency =<48000000>;
>>                 };
>> +
>> +               wdt2: wdt {
>> +                       compatible = "ti,omap2-wdt";
>> +                       ti,hwmods = "wd_timer2";
>> +               };
>>         };
>> };
>> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
>> index 99474fa..dbf8a5b 100644
>> --- a/arch/arm/boot/dts/omap3.dtsi
>> +++ b/arch/arm/boot/dts/omap3.dtsi
>> @@ -215,5 +215,10 @@
>>                         compatible = "ti,omap3-hsmmc";
>>                         ti,hwmods = "mmc3";
>>                 };
>> +
>> +               wdt2: wdt {
>> +                       compatible = "ti,omap3-wdt", "ti,omap2-wdt";
>> +                       ti,hwmods = "wd_timer2";
>> +               };
>>         };
>> };
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 359c497..ce74e87 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -272,5 +272,10 @@
>>                         ti,hwmods = "mmc5";
>>                         ti,needs-special-reset;
>>                 };
>> +
>> +               wdt2: wdt {
>> +                       compatible = "ti,omap4-wdt", "ti,omap2-wdt";
>> +                       ti,hwmods = "wd_timer2";
>> +               };
>>         };
>> };
>>
>> Infos for omap3:
>> # dmesg|grep Machine
>> <6>[    0.000000] Machine: Generic OMAP3 (Flattened Device Tree), model:
>> TI OMAP3 EVM (OMAP3530, AM/DM37x)
>> # dmesg|grep omap_wdt_probe
>> <4>[    2.552825] in omap_wdt_probe: 299, res->start = 0x48314000
>>
>> Infos for omap4:
>> root at localhost:/root>  dmesg|grep Machine
>> [    0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI
>> OMAP4 SDP board
>> root at localhost:/root>  dmesg|grep omap_wdt_probe
>> [    1.687896] in omap_wdt_probe: 299, res->start = 0x4a314000
>>
>> So can I drop the wdt addr from dts file? otherwise it is not feasible
>> to add omap2 wdt node in omap2.dtsi
>> due to different addrs for omap2420 and omap2430.
>
> Benoit, what is your preference here?

Get rid of both omap2420 and 2430 :-)

The point is that only OMAP3 and OMAP4 are supposed to be migrated to DT 
for the moment.

If you do not have any OMAP2 board to test that, it is anyway safer to 
not touch the omap2.dtsi file.

If the 2 or 3 remaining users of OMAP2 boards want to have DT support, 
they'll be able to add that themselves.

Regards,
Benoit