Subject: [PATCH v2] ARM: at91: add support for Telit EVK GE863-PRO3

From: [email-masked] (Nicolas Ferre)
Date: Thu, 7 Jun 2012 15:21:14 +0200

On 05/31/2012 09:21 AM, Fabio Porcedda :
> Signed-off-by: Fabio Porcedda <[email-masked]>

Acked-by: Nicolas Ferre <[email-masked]>

pushed in at91-3.6-dt branch on
git://github.com/at91linux/linux-at91.git

Thanks,

> ---
>  - changes for v2
>    - add empty line before the Signed-off-by line
> 
>  arch/arm/boot/dts/evk_ge863_pro3.dts |   57 ++++++++++++++++++++++++++++++++++
>  arch/arm/mach-at91/Makefile.boot     |    1 +
>  2 files changed, 58 insertions(+)
>  create mode 100644 arch/arm/boot/dts/evk_ge863_pro3.dts
> 
> diff --git a/arch/arm/boot/dts/evk_ge863_pro3.dts b/arch/arm/boot/dts/evk_ge863_pro3.dts
> new file mode 100644
> index 0000000..bcd5ae1
> --- /dev/null
> +++ b/arch/arm/boot/dts/evk_ge863_pro3.dts
> @@ -0,0 +1,57 @@
> +/*
> + * evk_ge863_pro3.dts - Device Tree file for Telit EVK GE863-PRO3
> + *
> + * Copyright (C) 2012 Telit,
> + *               2012 Fabio Porcedda <[email-masked]>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +/dts-v1/;
> +/include/ "at91sam9260.dtsi"
> +
> +/ {
> +	model = "Telit EVK GE863-PRO3";
> +	compatible = "telit,evk_ge863-pro3", "atmel,at91sam9260", "atmel,at91sam9";
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
> +	};
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		main_clock: clock at 0 {
> +			compatible = "atmel,osc", "fixed-clock";
> +			clock-frequency = <6000000>;
> +		};
> +	};
> +
> +	ahb {
> +		apb {
> +			dbgu: serial at fffff200 {
> +				status = "okay";
> +			};
> +
> +			usb1: gadget at fffa4000 {
> +				atmel,vbus-gpio = <&pioC 4 0>;
> +				status = "okay";
> +			};
> +		};
> +
> +
> +		nand0: nand at 40000000 {
> +			nand-bus-width = <8>;
> +			nand-ecc-mode = "soft";
> +			nand-on-flash-bbt;
> +			status = "okay";
> +
> +			root at 07c0000 {
> +				label = "root";
> +				reg = <0x7c0000 0x7840000>;
> +			};
> +
> +		};
> +	};
> +};
> diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
> index 9e84fe4..7bb44f0 100644
> --- a/arch/arm/mach-at91/Makefile.boot
> +++ b/arch/arm/mach-at91/Makefile.boot
> @@ -16,6 +16,7 @@ endif
>  # Keep dtb files sorted alphabetically for each SoC
>  # sam9260
>  dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
> +dtb-$(CONFIG_MACH_AT91SAM_DT) += evk_ge863_pro3.dtb
>  dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
>  dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
>  # sam9263

-- 
Nicolas Ferre