Subject: [PATCH 1/3] ARM: OMAP2+: nand: unify init functions

From: [email-masked] (Jon Hunter)
Date: Mon, 11 Jun 2012 10:43:45 -0500

Hi Afzal,

On 06/11/2012 09:01 AM, Afzal Mohammed wrote:
> Helper function for updating nand platform data has been
> added the capability to take timing structure arguement.
> Usage of omap_nand_flash_init() has been replaced by modifed
> one, omap_nand_flash_init was doing things similar to
> board_nand_init except that NAND CS# were being acquired
> based on bootloader setting. As CS# is hardwired for a given
> board, acquiring gpmc CS# has been removed, and updated with
> the value on board.
> 
> NAND CS# used in beagle board was found to be CS0.
> Thomas Weber <[email-masked]> reported
> that value of devkit8000 to be CS0. Overo board was found
> to be using CS0 based on u-boot, while google grep says
> omap3touchbook too has CS0.

[1] also confirms the omap3-touchbook uses CS0.

> Signed-off-by: Afzal Mohammed <[email-masked]>

Which boards have been tested with this change?

Otherwise, looks good.

Reviewed-by: Jon Hunter <[email-masked]>

Cheers
Jon

[1] http://www.alwaysinnovating.com/wiki/index.php/Booting