Subject: [PATCH] ARM: davinci: cp_intc: Add OF support for TI interrupt controller

From: [email-masked] (Sekhar Nori)
Date: Fri, 6 Jul 2012 22:23:54 +0530

Hi Grant,

On 7/5/2012 6:13 PM, Heiko Schocher wrote:
> Hello Sekhar,
> 
> On 03.07.2012 21:16, Sekhar Nori wrote:
>> From: Heiko Schocher<[email-masked]>
>>
>> Add a function to initialize the Common Platform Interrupt Controller
>> (cp_intc) from TI used on OMAP-L1x SoCs using a device tree node.
>>
>> Signed-off-by: Heiko Schocher<[email-masked]>
>> Cc: davinci-linux-open-source at linux.davincidsp.com
>> Cc: linux-arm-kernel at lists.infradead.org
>> Cc: devicetree-discuss at lists.ozlabs.org
>> Cc: Grant Likely<[email-masked]>
>> Cc: Sekhar Nori<[email-masked]>
>> Cc: Wolfgang Denk<[email-masked]>
>> Cc: Sergei Shtylyov<[email-masked]>
>> Signed-off-by: Sekhar Nori<[email-masked]>
>> ---
>>   .../devicetree/bindings/arm/davinci/cp-intc.txt    |   27
>> ++++++++++++++++++++
>>   arch/arm/mach-davinci/cp_intc.c                    |   16 +++++++++---
>>   arch/arm/mach-davinci/include/mach/cp_intc.h       |    1 +
>>   3 files changed, 41 insertions(+), 3 deletions(-)
>>   create mode 100644
>> Documentation/devicetree/bindings/arm/davinci/cp-intc.txt
> 
> Thanks!
> 
> Tested on the enbw_cmc board.

Any further feedback on this? If you are OK, I would like to queue this
for v3.6 through DaVinci tree.

Thanks,
Sekhar