Subject: [PATCH v1 08/11] arm/dts: Add twl4030-usb data

From: [email-masked] (Rajendra Nayak)
Date: Tue, 10 Jul 2012 11:43:28 +0530

On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
> Add twl4030-usb data node in twl4030 device tree file.
>
> Signed-off-by: Kishon Vijay Abraham I<[email-masked]>
> ---
>   arch/arm/boot/dts/twl4030.dtsi |   21 +++++++++++++++++++++
>   1 files changed, 21 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
> index 22f4d13..66534a3 100644
> --- a/arch/arm/boot/dts/twl4030.dtsi
> +++ b/arch/arm/boot/dts/twl4030.dtsi
> @@ -37,6 +37,18 @@
>   		regulator-max-microvolt =<3150000>;
>   	};
>
> +	vusb1v5: regulator at 3 {
> +		compatible = "ti,twl4030-vusb1v5";
> +	};

These @3, @4 are actually wrong since the node do
not have a 'reg' property in it. This was commented on
by David Brown on my original series which added this but
it somehow slipped through the cracks. I understand that
you would have looked up what existed in the file and
extended, but what already exists in the file needs to
be fixed up too. I'll send in a patch to fix those up.

regards,
Rajendra

> +
> +	vusb1v8: regulator at 4 {
> +		compatible = "ti,twl4030-vusb1v8";
> +	};
> +
> +	vusb3v1: regulator at 5 {
> +		compatible = "ti,twl4030-vusb3v1";
> +	};
> +
>   	twl_gpio: gpio {
>   		compatible = "ti,twl4030-gpio";
>   		gpio-controller;
> @@ -44,4 +56,13 @@
>   		interrupt-controller;
>   		#interrupt-cells =<1>;
>   	};
> +
> +	twl4030-usb {
> +		compatible = "ti,twl4030-usb";
> +		interrupts =<  10 4>;
> +		usb1v5-supply =<&vusb1v5>;
> +		usb1v8-supply =<&vusb1v8>;
> +		usb3v1-supply =<&vusb3v1>;
> +		usb_mode =<1>;
> +	};
>   };