Subject: [GIT PULL 2/5] omap board changes for v3.6 merge window

From: [email-masked] (Zumeng Chen)
Date: Wed, 11 Jul 2012 09:20:55 +0800

It seems work well now, thanks Tony and Arnd for your extra work
on these patches.

Regards,
Zumeng
? 2012?07?11? 08:52, Zumeng Chen ??:
> ? 2012?07?10? 23:34, Arnd Bergmann ??:
>> On Tuesday 10 July 2012, Tony Lindgren wrote:
>>> The following changes since commit 
>>> 6887a4131da3adaab011613776d865f4bcfb5678:
>>>
>>>    Linux 3.5-rc5 (2012-06-30 16:08:57 -0700)
>>>
>>> are available in the git repository at:
>>>
>>>    git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap 
>>> tags/omap-devel-board-for-v3.6
>>>
>>> for you to fetch changes up to 
>>> b103a2e22a238085f5c50d96345e1a09bb1efd50:
>>>
>>>    ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS 
>>> support (2012-07-09 23:22:24 -0700)
>>>
>>> ----------------------------------------------------------------
>>> Board and platform data related changes for omaps
>>>
>>> ----------------------------------------------------------------
>>> Andy Gross (1):
>>>        omap2+: add drm device
>>>
>>> Dmitry Lifshitz (2):
>>>        ARM: OMAP3: cm-t35: add mt9t001 camera sensor support
>>>        ARM: OMAP3: cm-t35: add tvp5150 decoder support
>>>
>>> Peter Ujfalusi (2):
>>>        ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
>>>        ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2
>>>
>>> Tony Lindgren (1):
>>>        ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS 
>>> support
>>>
>>> Zumeng Chen (4):
>>>        ARM: OMAP3EVM: Add NAND flash definition
>>>        ARM: OMAP3EVM: Adding USB internal LDOs board file
>>>        ARM: omap3evm: enable VBUS switch for EHCI tranceiver
>>>        ARM: OMAP3530evm: set pendown_state and debounce time for 
>>> ads7846
>>> diff --cc arch/arm/mach-omap2/common-board-devices.c
>> I got a conflict in arch/arm/mach-omap2/common-board-devices.c between
>> 16aced80f6739 "ARM: OMAP3530evm: set pendown_state and debounce time for
>> ads7846" and 97ee9f01d6f26 "ARM: OMAP: fix the ads7846 init code",
>> see my resolution below.
>>
>> Please check if what I have in the for-next branch makese sense to you
>> all.
> No problem,  many thanks Arnd for your information.
> I'll check it, test it, and send you feedback.
>
> Regards,
> Zumeng
>>
>>     Arnd
>>
>> * Unmerged path arch/arm/mach-omap2/common-board-devices.c
>> diff --git a/arch/arm/mach-omap2/common-board-devices.c 
>> b/arch/arm/mach-omap2/common-board-devices.c
>> index 1706ebc..1473474 100644
>> --- a/arch/arm/mach-omap2/common-board-devices.c
>> +++ b/arch/arm/mach-omap2/common-board-devices.c
>> @@ -35,6 +35,16 @@ static struct omap2_mcspi_device_config 
>> ads7846_mcspi_config = {
>>       .turbo_mode    = 0,
>>    };
>>
>>   +/*
>>   + * ADS7846 driver maybe request a gpio according to the value
>>   + * of pdata->get_pendown_state, but we have done this. So set
>>   + * get_pendown_state to avoid twice gpio requesting.
>>   + */
>>   +static int omap3_get_pendown_state(void)
>>   +{
>>   +    return !gpio_get_value(OMAP3_EVM_TS_GPIO);
>>   +}
>>   +
>>    static struct ads7846_platform_data ads7846_config = {
>>       .x_max            = 0x0fff,
>>       .y_max            = 0x0fff,
>> @@ -45,6 +55,7 @@ static struct ads7846_platform_data ads7846_config = {
>>       .debounce_rep        = 1,
>>       .gpio_pendown        = -EINVAL,
>>       .keep_vref_on        = 1,
>>   +    .get_pendown_state    =&omap3_get_pendown_state,
>>    };
>>
>>    static struct spi_board_info ads7846_spi_board_info __initdata = {
>> @@ -63,28 +74,30 @@ void __init omap_ads7846_init(int bus_num, int 
>> gpio_pendown, int gpio_debounce,
>>       struct spi_board_info *spi_bi =&ads7846_spi_board_info;
>>       int err;
>>
>> -    if (board_pdata&&  board_pdata->get_pendown_state) {
>> -        err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
>> -        if (err) {
>> -            pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
>> -            return;
>> -        }
>> -        gpio_export(gpio_pendown, 0);
>> -
>> -        if (gpio_debounce)
>> -            gpio_set_debounce(gpio_pendown, gpio_debounce);
>> +    err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
>> +    if (err) {
>> +        pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
>> +        return;
>>       }
>>
>> +    if (gpio_debounce)
>> +        gpio_set_debounce(gpio_pendown, gpio_debounce);
>> +
>>       spi_bi->bus_num    = bus_num;
>>       spi_bi->irq    = gpio_to_irq(gpio_pendown);
>>
>>       if (board_pdata) {
>>           board_pdata->gpio_pendown = gpio_pendown;
>>           spi_bi->platform_data = board_pdata;
>> +        if (board_pdata->get_pendown_state)
>> +            gpio_export(gpio_pendown, 0);
>>       } else {
>>           ads7846_config.gpio_pendown = gpio_pendown;
>>       }
>>
>> +    if (!board_pdata || (board_pdata&&  
>> !board_pdata->get_pendown_state))
>> +        gpio_free(gpio_pendown);
>> +
>>       spi_register_board_info(&ads7846_spi_board_info, 1);
>>   }
>>   #else
>
> -- 
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html