Subject: [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators

From: [email-masked] (Laxman Dewangan)
Date: Wed, 11 Jul 2012 15:32:01 +0530

On Tuesday 10 July 2012 10:31 PM, Mark Brown wrote:
> * PGP Signed by an unknown key
>
> On Tue, Jul 10, 2012 at 10:23:48PM +0530, Laxman Dewangan wrote:
>
>> Then I will have 2 question:
>> 1. If that pin is connected to battery then what should be entry?
>>     vcc1-supply =<>>>;
>> Do we need to register battery supply as fixed (non-gpio based) and
>> then refer here for phandle?
> Use a fixed voltage regulator to represent the battery.
>
>> 2. what about non-dt case? The regulator registration will also fail
>> here because of there is no regulator saying vcc1 in this case. Do
>> we need to register the vcc1 regualtor as fixed, battery supplied
>> regulator in board files so that the ldo's registration will
>> success?
> Same thing, use a fixed voltage regulator.

Understood completely and it is so simple to support vin-supply. Will 
implement the same. Thanks for clearing doubts.