From: jon-hunter@ti•com (Jon Hunter)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use
Date: Wed, 1 Aug 2012 13:17:55 -0500 [thread overview]
Message-ID: <501972D3.7070606@ti.com> (raw)
In-Reply-To: <alpine.DEB.2.00.1208010906470.21488@utopia.booyaka.com>
Hi Paul,
On 08/01/2012 10:08 AM, Paul Walmsley wrote:
> Hi Jon,
>
> On Tue, 31 Jul 2012, Jon Hunter wrote:
>
>> Sorry for all the emails. However, I wanted to get this out to you as
>> I am due to be out for a couple weeks.
>>
>> So I have updated your patch [1] with the following changes ...
>>
>> 1. Re-based on top of your omap3 clock domain fix [2]
>> 2. Modified the above change I mentioned to check for
>> CLKDM_MISSING_IDLE_REPORTING in omap_pm_clkdms_setup() instead of
>> the omap2_clkdm_clk_enable(). This is to prevent the clock domain
>> being placed in HW_AUTO on boot if enabled early.
>> 3. Made the other change I mentioned earlier [3].
>>
>> This is now working well for me on OMAP3/4.
>
> Your changes look good to me. Do you have a strong preference as to
> whether that patch should go in as part of 3.6-rc or 3.7? I'd be inclined
> to queue it for 3.7 based on the size of the patch.
Thanks for the feedback. 3.7 is fine with me, I don't expect the PMU
changes I have will be in before that.
Cheers
Jon
next prev parent reply other threads:[~2012-08-01 18:17 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-07 21:22 [PATCH V2 00/10] ARM: OMAP4: Add PMU Support Jon Hunter
2012-06-07 21:22 ` [PATCH V2 01/10] ARM: PMU: Add runtime PM Support Jon Hunter
2012-06-08 9:47 ` Will Deacon
2012-06-08 14:17 ` Jon Hunter
2012-06-08 15:24 ` Jon Hunter
2012-06-11 17:39 ` Will Deacon
2012-06-11 19:01 ` Jon Hunter
2012-06-12 9:28 ` Will Deacon
2012-06-12 21:17 ` Jon Hunter
2012-06-12 21:31 ` Will Deacon
2012-06-12 22:41 ` Jon Hunter
2012-07-02 9:55 ` Will Deacon
2012-07-02 16:50 ` Jon Hunter
2012-07-02 22:01 ` Will Deacon
2012-07-06 0:40 ` Jon Hunter
2012-07-26 0:41 ` Jon Hunter
2012-07-26 15:05 ` Will Deacon
2012-07-26 15:16 ` Jon Hunter
2012-07-31 15:14 ` Will Deacon
2012-07-31 23:07 ` Jon Hunter
2012-08-01 20:47 ` Will Deacon
2012-08-01 22:34 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 02/10] ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD Jon Hunter
2012-06-07 21:22 ` [PATCH V2 03/10] ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS Jon Hunter
2012-06-13 6:07 ` Pandita, Vikram
2012-06-13 6:13 ` Pandita, Vikram
2012-06-13 6:19 ` Shilimkar, Santosh
2012-06-07 21:22 ` [PATCH V2 04/10] ARM: OMAP4430: Create PMU device via HWMOD Jon Hunter
2012-06-07 21:22 ` [PATCH V2 05/10] ARM: OMAP2+: PMU: Add runtime PM support Jon Hunter
2012-06-07 21:22 ` [PATCH V2 06/10] ARM: OMAP4: Route PMU IRQs to CTI IRQs Jon Hunter
2012-06-07 21:22 ` [PATCH V2 07/10] ARM: OMAP4: CLKDM: Update supported transition modes Jon Hunter
2012-07-04 15:38 ` Paul Walmsley
2012-07-05 17:14 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use Jon Hunter
2012-07-12 21:17 ` Paul Walmsley
2012-07-13 13:54 ` Jon Hunter
2012-07-13 14:00 ` Will Deacon
2012-07-13 14:07 ` Jon Hunter
2012-07-20 22:24 ` Jon Hunter
2012-07-13 21:00 ` Paul Walmsley
2012-07-16 18:27 ` Jon Hunter
2012-07-16 18:38 ` Paul Walmsley
2012-07-16 19:38 ` Jon Hunter
2012-07-20 22:24 ` Jon Hunter
2012-07-30 23:26 ` Jon Hunter
2012-07-31 4:36 ` Jon Hunter
2012-07-31 18:16 ` Jon Hunter
2012-08-01 0:20 ` Jon Hunter
2012-08-01 15:08 ` Paul Walmsley
2012-08-01 18:17 ` Jon Hunter [this message]
2012-08-01 15:36 ` Paul Walmsley
2012-08-01 19:41 ` Jon Hunter
2012-08-02 7:34 ` Shilimkar, Santosh
2012-10-08 22:24 ` Jon Hunter
2012-10-09 4:41 ` Paul Walmsley
2012-07-31 20:56 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 09/10] ARM: OMAP4: Enable PMU for OMAP4460/70 Jon Hunter
2012-06-07 21:22 ` [PATCH V2 10/10] ARM: OMAP2+: PMU: Add QoS constraint Jon Hunter
2012-06-07 23:36 ` [PATCH V2 00/10] ARM: OMAP4: Add PMU Support Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=501972D3.7070606@ti.com \
--to=jon-hunter@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox